Imported more library files

Not compiling currently

config/sl_rail_util_pa_config.h

@@ -0,0 +1,81 @@
+/***************************************************************************//**
+ * @file
+ * @brief Power Amplifier configuration file.
+ *******************************************************************************
+ * # License
+ * <b>Copyright 2020 Silicon Laboratories Inc. www.silabs.com</b>
+ *******************************************************************************
+ *
+ * SPDX-License-Identifier: Zlib
+ *
+ * The licensor of this software is Silicon Laboratories Inc.
+ *
+ * This software is provided 'as-is', without any express or implied
+ * warranty. In no event will the authors be held liable for any damages
+ * arising from the use of this software.
+ *
+ * Permission is granted to anyone to use this software for any purpose,
+ * including commercial applications, and to alter it and redistribute it
+ * freely, subject to the following restrictions:
+ *
+ * 1. The origin of this software must not be misrepresented; you must not
+ *    claim that you wrote the original software. If you use this software
+ *    in a product, an acknowledgment in the product documentation would be
+ *    appreciated but is not required.
+ * 2. Altered source versions must be plainly marked as such, and must not be
+ *    misrepresented as being the original software.
+ * 3. This notice may not be removed or altered from any source distribution.
+ *
+ ******************************************************************************/
+
+#ifndef SL_RAIL_UTIL_PA_CONFIG_H
+#define SL_RAIL_UTIL_PA_CONFIG_H
+
+#include "rail_types.h"
+
+// <<< Use Configuration Wizard in Context Menu >>>
+// <h>PA configuration
+
+// <o SL_RAIL_UTIL_PA_POWER_DECI_DBM> Initial PA Power (deci-dBm, 100 = 10.0 dBm)
+// <i> Default: 100
+#define SL_RAIL_UTIL_PA_POWER_DECI_DBM      100
+
+// <o SL_RAIL_UTIL_PA_RAMP_TIME_US> PA Ramp Time (microseconds)
+// <0-65535:1>
+// <i> Default: 10
+#define SL_RAIL_UTIL_PA_RAMP_TIME_US        10
+
+// <o SL_RAIL_UTIL_PA_VOLTAGE_MV> Milli-volts on PA supply pin (PA_VDD)
+// <0-65535:1>
+// <i> Default: 3300
+#define SL_RAIL_UTIL_PA_VOLTAGE_MV          1800
+
+// <o SL_RAIL_UTIL_PA_SELECTION_2P4GHZ> 2.4 GHz PA Selection
+// <RAIL_TX_POWER_MODE_2P4GIG_HIGHEST=> Highest Possible
+// <RAIL_TX_POWER_MODE_2P4GIG_HP=> High Power (chip-specific)
+// <RAIL_TX_POWER_MODE_2P4GIG_LP=> Low Power
+// <RAIL_TX_POWER_MODE_NONE=> Disable
+// <i> Default: RAIL_TX_POWER_MODE_2P4GIG_HIGHEST
+#define SL_RAIL_UTIL_PA_SELECTION_2P4GHZ    RAIL_TX_POWER_MODE_2P4GIG_HIGHEST
+
+// <o SL_RAIL_UTIL_PA_SELECTION_SUBGHZ> Sub-1 GHz PA Selection
+// <RAIL_TX_POWER_MODE_NONE=> Disable
+// <i> Default: RAIL_TX_POWER_MODE_NONE
+#define SL_RAIL_UTIL_PA_SELECTION_SUBGHZ    RAIL_TX_POWER_MODE_NONE
+
+// <s.50 SL_RAIL_UTIL_PA_CURVE_HEADER> Header file containing custom PA curves
+// <i> Default: "pa_curves_efr32.h"
+#define SL_RAIL_UTIL_PA_CURVE_HEADER        "pa_curves_efr32.h"
+
+// <s.50 SL_RAIL_UTIL_PA_CURVE_TYPES> Header file containing PA curve types
+// <i> Default: "pa_curve_types_efr32.h"
+#define SL_RAIL_UTIL_PA_CURVE_TYPES         "pa_curve_types_efr32.h"
+
+// <q SL_RAIL_UTIL_PA_CALIBRATION_ENABLE> Enable PA Calibration
+// <i> Default: 1
+#define SL_RAIL_UTIL_PA_CALIBRATION_ENABLE  1
+
+// </h>
+// <<< end of configuration section >>>
+
+#endif // SL_RAIL_UTIL_PA_CONFIG_H