Imported more library files

Not compiling currently

inc/sl_systemview_config.h

@@ -0,0 +1,80 @@
+/**
+ * @file
+ * @brief Segger System View configuration file.
+ *******************************************************************************
+ * # License
+ * <b>Copyright 2020 Silicon Laboratories Inc.
+ *www.silabs.com</b>
+ *******************************************************************************
+ *
+ * SPDX-License-Identifier: Zlib
+ *
+ * The licensor of this software is Silicon
+ *Laboratories Inc.
+ *
+ * This software is provided 'as-is', without any
+ *express or implied warranty. In no event will the
+ *authors be held liable for any damages arising from
+ *the use of this software.
+ *
+ * Permission is granted to anyone to use this
+ *software for any purpose, including commercial
+ *applications, and to alter it and redistribute it
+ * freely, subject to the following restrictions:
+ *
+ * 1. The origin of this software must not be
+ *misrepresented; you must not claim that you wrote
+ *the original software. If you use this software in a
+ *product, an acknowledgment in the product
+ *documentation would be appreciated but is not
+ *required.
+ * 2. Altered source versions must be plainly marked
+ *as such, and must not be misrepresented as being the
+ *original software.
+ * 3. This notice may not be removed or altered from
+ *any source distribution.
+ *
+ ******************************************************************************/
+
+// Overwirte SystemView config for GN build, SHOULD NOT BE USED WITH SLC!!!
+
+#pragma once
+
+#define SEGGER_SYSVIEW_TIMESTAMP_SOURCE_DWT 0
+#define SEGGER_SYSVIEW_TIMESTAMP_SOURCE_SLEEPTIMER 1
+
+// <o SEGGER_SYSVIEW_TIMESTAMP_SOURCE> Source for the time stamps
+//   <SEGGER_SYSVIEW_TIMESTAMP_SOURCE_DWT=> DWT Cycle Counter
+//   <SEGGER_SYSVIEW_TIMESTAMP_SOURCE_SLEEPTIMER=> Sleep Timer
+// <i> Source for time stamps. Only meaningful when no OS is present. When an OS is present, time stamp is provided by the OS.
+// <i> SEGGER_SYSVIEW_TIMESTAMP_SOURCE_DWT is not available on Cortex-M0+ and cannot be selected.
+// <i> Default: SEGGER_SYSVIEW_TIMESTAMP_SOURCE_SLEEPTIMER
+#define SEGGER_SYSVIEW_TIMESTAMP_SOURCE SEGGER_SYSVIEW_TIMESTAMP_SOURCE_SLEEPTIMER
+
+// <o SEGGER_SYSVIEW_RTT_BUFFER_SIZE> RTT buffer size (in bytes)
+// <i> Default: 1024
+#define SEGGER_SYSVIEW_RTT_BUFFER_SIZE 8192
+
+// <o SEGGER_SYSVIEW_RTT_CHANNEL> RTT channel for SystemView
+// <i> Default: 1
+#define SEGGER_SYSVIEW_RTT_CHANNEL 1
+
+// <q SEGGER_SYSVIEW_USE_STATIC_BUFFER> Use static buffer to generate events
+// <i> Determines if a single static buffer is used to generate the events. If disabled, the buffer is allocated on the stack.
+// <i> Default: 1
+#define SEGGER_SYSVIEW_USE_STATIC_BUFFER 1
+
+// <q SEGGER_SYSVIEW_POST_MORTEM_MODE> Enable post mortem mode
+// <i> Default: 0
+#define SEGGER_SYSVIEW_POST_MORTEM_MODE 0
+
+// <q SEGGER_SYSVIEW_CAN_RESTART> Enable SystemView restart
+// <i> If enabled, start sequence is sent on every startup. It is not recommended to disabled this feature.
+// <i> Default: 1
+#define SEGGER_SYSVIEW_CAN_RESTART 1
+
+// <q SEGGER_SYSVIEW_ID_SHIFT> Number of bits to shift the Id to save bandwidth. (i.e. 2 when Ids are 4 byte aligned)
+// <i> Default: 0
+#define SEGGER_SYSVIEW_ID_SHIFT 0
+
+// <<< end of configuration section >>>