/***************************************************************************//**
 * @file
 * @brief The main header file for the RAIL library. It describes the external
 *   APIs available to a RAIL user
 *******************************************************************************
 * # License
 * <b>Copyright 2020 Silicon Laboratories Inc. www.silabs.com</b>
 *******************************************************************************
 *
 * SPDX-License-Identifier: Zlib
 *
 * The licensor of this software is Silicon Laboratories Inc.
 *
 * This software is provided 'as-is', without any express or implied
 * warranty. In no event will the authors be held liable for any damages
 * arising from the use of this software.
 *
 * Permission is granted to anyone to use this software for any purpose,
 * including commercial applications, and to alter it and redistribute it
 * freely, subject to the following restrictions:
 *
 * 1. The origin of this software must not be misrepresented; you must not
 *    claim that you wrote the original software. If you use this software
 *    in a product, an acknowledgment in the product documentation would be
 *    appreciated but is not required.
 * 2. Altered source versions must be plainly marked as such, and must not be
 *    misrepresented as being the original software.
 * 3. This notice may not be removed or altered from any source distribution.
 *
 ******************************************************************************/

#ifndef __RAIL_H__
#define __RAIL_H__

#include <string.h> // For memcpy()

// Get the RAIL-specific structures and types
#include "rail_types.h"
#include "rail_assert_error_codes.h"

#ifdef __cplusplus
extern "C" {
#endif

/**
 * @addtogroup RAIL_API RAIL API
 * @brief This is the primary API layer for the Radio Abstraction Interface
 *   Layer (RAIL).
 * @{
 */

/**
 * @defgroup Chip_Specific Chip-Specific
 * @brief Chip-Specific RAIL APIs, types, and information
 */

/**
 * @defgroup Protocol_Specific Protocol-specific
 * @brief Protocol-Specific RAIL APIs
 */

/******************************************************************************
 * General Radio Operation
 *****************************************************************************/
/**
 * @addtogroup General
 * @brief Basic APIs to set up and interact with the RAIL library
 * @{
 */

/**
 * Get the version information for the compiled RAIL library.
 *
 * @param[out] version A non-NULL pointer to \ref RAIL_Version_t structure to
 *   populate with version information.
 * @param[in] verbose Populate \ref RAIL_Version_t struct with verbose
 *   information.
 * @return Status code indicating success of the function call.
 *
 * The version information contains a major version number, a minor version
 * number, and a rev (revision) number.
 */
RAIL_Status_t RAIL_GetVersion(RAIL_Version_t *version, bool verbose);

#ifndef DOXYGEN_SHOULD_SKIP_THIS

/**
 * A global pointer to the head of a linked list of state buffers
 * \ref RAIL_Init() can use.
 *
 * RAIL internally provides one statically-allocated RAM state buffer
 * for a single protocol and two for dynamic multiprotocol. If your
 * application needs more, they can be provided via \ref
 * RAIL_AddStateBuffer3() or \ref RAIL_AddStateBuffer4(), which use
 * internal buffers, or the more general \ref RAIL_AddStateBuffer().
 *
 * This symbol is WEAK in the RAIL library in case an application wants
 * to allocate and provide its own buffers. However, this use is highly
 * discouraged.
 */
extern RAIL_StateBufferEntry_t *RAIL_StateBufferHead;

/**
 * Get the run-time size of the radio's state buffer.
 *
 * @param[in] genericRailHandle A generic RAIL instance handle.
 * @return Size, in bytes, of the radio's internal state buffer.
 *   If the handle is invalid, 0 is returned.
 *
 * See \ref RAIL_STATE_BUFFER_BYTES for a compile-time estimated size
 * definition, which may be larger than what this function returns.
 */
uint32_t RAIL_GetStateBufferSize(RAIL_Handle_t genericRailHandle);

/**
 * Add an app-provided state buffer to the \ref RAIL_StateBufferHead list.
 *
 * @param[in] genericRailHandle A generic RAIL instance handle.
 * @param[in] newEntry A pointer to a \ref RAIL_StateBufferEntry_t to
 *   add to the liked list of state buffers headed by
 *   \ref RAIL_StateBufferHead. Both the \ref RAIL_StateBufferEntry_t
 *   to which this parameter points and the \ref
 *   RAIL_StateBufferEntry_t::buffer to which that points must be
 *   allocated in RAM and persist indefinitely beyond this call.
 * @return Status code indicating success of the function call.
 *   An error should be returned if the entry's
 *   \ref RAIL_StateBufferEntry_t::bufferBytes is too small or
 *   the RAIL_StateBufferEntry_t::buffer pointer seems invalid.
 *
 * RAIL's internal \ref RAIL_StateBufferHead should prove
 * sufficient for most applications, providing one (single protocol)
 * or two (dynamic multiprotocol) buffers preallocated in RAM for
 * use by \ref RAIL_Init(). This function exists for dynamic
 * multiprotocol applications that needs more than two protocols, or
 * that prefer to dynamically allocate RAIL state buffers just prior
 * to calling \ref RAIL_Init() rather than having them statically
 * allocated in RAM.
 */
RAIL_Status_t RAIL_AddStateBuffer(RAIL_Handle_t genericRailHandle,
                                  RAIL_StateBufferEntry_t *newEntry);

#endif//DOXYGEN_SHOULD_SKIP_THIS

/**
 * Add a 3rd multiprotocol internal state buffer for use by \ref RAIL_Init().
 *
 * @param[in] genericRailHandle A generic RAIL instance handle.
 * @return Status code indicating success of the function call.
 *   An error is returned if the 3rd state buffer was previously added
 *   or this isn't the RAIL multiprotocol library.
 */
RAIL_Status_t RAIL_AddStateBuffer3(RAIL_Handle_t genericRailHandle);

/**
 * Add a 4th multiprotocol internal state buffer for use by \ref RAIL_Init().
 *
 * @param[in] genericRailHandle A generic RAIL instance handle.
 * @return Status code indicating success of the function call.
 *   An error is returned if the 4th state buffer was previously added.
 *   or this isn't the RAIL multiprotocol library.
 */
RAIL_Status_t RAIL_AddStateBuffer4(RAIL_Handle_t genericRailHandle);

/**
 * Allocate a DMA channel for RAIL to work with.
 *
 * @param[in] channel The DMA channel to use when copying memory. If a value of
 *   \ref RAIL_DMA_INVALID is passed, RAIL will stop using any DMA channel.
 * @return Status code indicating success of the function call.
 *
 * To use this API, the application must initialize the DMA engine
 * on the chip and allocate a DMA channel. This channel will be used
 * periodically to copy memory more efficiently. Call this function
 * before \ref RAIL_Init() to have the most benefit. If the application needs
 * to take back control of the DMA channel that RAIL is using, this API may be
 * called with a channel of \ref RAIL_DMA_INVALID to tell RAIL to stop using DMA.
 *
 * @warning To allocate and use a DMA channel for RAIL to work with when
 *   TrustZone is enabled and LDMA is configured as secure peripheral, the
 *   secure application must initialize the DMA engine and call this API. The
 *   non-secure application must provide a non-NULL
 *   \ref RAIL_TZ_Config_t::radioPerformM2mLdmaCallback to
 *   \ref RAIL_TZ_InitNonSecure().
 *   To take back control of the DMA channel when TrustZone is enabled and LDMA
 *   is configured as secure peripheral, the secure application must call this
 *   API with a channel of \ref RAIL_DMA_INVALID. The non-secure application
 *   must provide a NULL \ref RAIL_TZ_Config_t::radioPerformM2mLdmaCallback to
 *   \ref RAIL_TZ_InitNonSecure().
 */
RAIL_Status_t RAIL_UseDma(uint8_t channel);

#ifndef DOXYGEN_SHOULD_SKIP_THIS

/**
 * Load the first image \ref RAIL_SEQ_IMAGE_1 into the radio sequencer during
 * RAIL initialization.
 *
 * @param[in] genericRailHandle A generic RAIL instance handle.
 * @return Status code indicating success of the function call.
 *
 * This function must only be called from within the RAIL callback context of
 * \ref RAILCb_RadioSequencerImageLoad(). Otherwise, the function returns \ref
 * RAIL_STATUS_INVALID_STATE.
 */
RAIL_Status_t RAIL_LoadSequencerImage1(RAIL_Handle_t genericRailHandle);

/**
 * Load the second image \ref RAIL_SEQ_IMAGE_2 into the radio sequencer during
 * RAIL initialization.
 *
 * @param[in] genericRailHandle A generic RAIL instance handle.
 * @return Status code indicating success of the function call.
 *
 * This function must only be called from within the RAIL callback context of
 * \ref RAILCb_RadioSequencerImageLoad(). Otherwise, the function returns \ref
 * RAIL_STATUS_INVALID_STATE. On platforms where \ref RAIL_SEQ_IMAGE_COUNT < 2,
 * the function returns with \ref RAIL_STATUS_INVALID_CALL.
 */
RAIL_Status_t RAIL_LoadSequencerImage2(RAIL_Handle_t genericRailHandle);

/**
 * Callback used to load the radio sequencer image during RAIL initialization.
 * This function is optional to implement.
 *
 * @return Status code indicating success of the function call.
 *
 * This callback is used by RAIL to load a radio sequencer image during \ref
 * RAIL_Init() via an API such as \ref RAIL_LoadSequencerImage1(). If this
 * function is not implemented, a default image will be loaded. On some
 * platforms, (in particular EFR32xG24), not implementing this function may
 * result in a larger overall code size due to unused sequencer images not
 * being dead stripped.
 *
 * @note If this function is implemented without a call to an image loading API
 *   such as \ref RAIL_LoadSequencerImage1(), an assert will occur during
 *   RAIL initialization. Similarly, if an image is loaded that is
 *   unsupported by the platform, an assert will occur.
 */
RAIL_Status_t RAILCb_RadioSequencerImageLoad(void);

/**
 * Load the OFDM and OQPSK image into the software modem (SFM) sequencer during
 * RAIL initialization.
 *
 * @param[in] genericRailHandle A generic RAIL instance handle.
 * @return Status code indicating success of the function call.
 *
 * This function must only be called from within the RAIL callback context of
 * \ref RAILCb_LoadSfmSequencer(). Otherwise, the function returns \ref
 * RAIL_STATUS_INVALID_STATE.
 */
RAIL_Status_t RAIL_LoadSfmSunOfdmOqpsk(RAIL_Handle_t genericRailHandle);

/**
 * Load the OFDM image into the software modem (SFM) sequencer during
 * RAIL initialization.
 *
 * @param[in] genericRailHandle A generic RAIL instance handle.
 * @return Status code indicating success of the function call.
 *
 * This function must only be called from within the RAIL callback context of
 * \ref RAILCb_LoadSfmSequencer(). Otherwise, the function returns \ref
 * RAIL_STATUS_INVALID_STATE.
 */
RAIL_Status_t RAIL_LoadSfmSunOfdm(RAIL_Handle_t genericRailHandle);

/**
 * Load the empty image into the software modem (SFM) sequencer during
 * RAIL initialization.
 *
 * @param[in] genericRailHandle A generic RAIL instance handle.
 * @return Status code indicating success of the function call.
 *
 * This function must only be called from within the RAIL callback context of
 * \ref RAILCb_LoadSfmSequencer(). Otherwise, the function returns \ref
 * RAIL_STATUS_INVALID_STATE.
 */
RAIL_Status_t RAIL_LoadSfmEmpty(RAIL_Handle_t genericRailHandle);

/**
 * Callback used to load the software modem (SFM) sequencer image during RAIL
 * initialization. This function is optional to implement.
 *
 * @return Status code indicating success of the function call.
 *
 * This callback is used by RAIL to load a software modem sequencer image
 * during \ref RAIL_Init() via an API such as \ref RFHAL_LoadSfmSunOfdmOqpsk().
 * If this function is not implemented, a default image including OFDM and
 * OQPSK modulations will be loaded.
 *
 * @note If this function is implemented without a call to an image loading API
 *   such as \ref RFHAL_LoadSfmSunOfdmOqpsk(), an assert will occur during RAIL
 *   initialization. Similarly, if an image is loaded that is unsupported by
 *   the platform, an assert will occur.
 */
RAIL_Status_t RAILCb_LoadSfmSequencer(void);

#endif //DOXYGEN_SHOULD_SKIP_THIS

/**
 * Reads out device specific data that may be needed by RAIL
 * and populates appropriate data structures in the library.
 *
 * @param[in] genericRailHandle A generic RAIL instance handle.
 * @return Status code indicating success of the function call.
 *
 * @note This function must be called before calling \ref RAIL_Init()
 *   on any platforms that require this data
 *   and should not be called inside a critical section.
 *   This function does nothing on EFR32 Series 2 devices.
 */
RAIL_Status_t RAIL_CopyDeviceInfo(RAIL_Handle_t genericRailHandle);

/**
 * Initialize RAIL.
 *
 * @param[in] railCfg The configuration for setting up the protocol.
 * @param[in] cb A callback that notifies the application when the radio is
 *   finished initializing and is ready for further configuration. This
 *   callback is useful for potential transceiver products that require a
 *   power up sequence before further configuration is available. After the
 *   callback fires, the radio is ready for additional configuration before
 *   transmit and receive operations.
 * @return Handle for initialized rail instance or NULL if an
 *   invalid value was passed in the railCfg.
 *
 * @note Call this function only once per protocol. If called
 *   again, it will do nothing and return NULL. \ref RAIL_CopyDeviceInfo()
 *   should be called once before calling this function for
 *   Silicon Labs Series 3 devices.
 */
RAIL_Handle_t RAIL_Init(const RAIL_Config_t *railCfg,
                        RAIL_InitCompleteCallbackPtr_t cb);

/**
 * Get RAIL initialization status.
 *
 * @return true if the radio has finished initializing and
 *   false otherwise.
 *
 * RAIL APIs, e.g., \ref RAIL_GetTime(), which work only if \ref RAIL_Init() has been called,
 * can use \ref RAIL_IsInitialized() to determine whether RAIL has been initialized or not.
 */
bool RAIL_IsInitialized(void);

/**
 * Collect entropy from the radio if available.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[out] buffer A non-NULL pointer to the buffer to write the collected entropy.
 * @param[in] bytes The number of bytes to fill in the input buffer.
 * @return The number of bytes of entropy collected. For
 *   radios that don't support entropy collection, the function returns 0.
 *   Values less than the requested amount may also be returned on platforms
 *   that use entropy pools to collect random data periodically.
 *
 * Attempts to fill the provided buffer with the requested number of bytes of
 * entropy. If the requested number of bytes can't be provided, as many
 * bytes as possible will be filled and returned. For radios
 * that do not support this function, 0 bytes are always returned. For
 * information about the specific mechanism for gathering entropy, see
 * documentation for the chip family.
 */
uint16_t RAIL_GetRadioEntropy(RAIL_Handle_t railHandle,
                              uint8_t *buffer,
                              uint16_t bytes);

/** @} */ // end of group General

/******************************************************************************
 * PTI
 *****************************************************************************/
/**
 * @addtogroup PTI PTI Packet Trace
 * @brief Basic APIs to set up and interact with PTI settings
 * @{
 */

/**
 * Configure PTI pin locations, serial protocols, and baud rates.
 *
 * @param[in] railHandle A radio-generic or real RAIL instance handle.
 * @param[in] ptiConfig A non-NULL pointer to the PTI configuration structure
 *   to use.
 * @return Status code indicating success of the function call.
 *
 * This method must be called before \ref RAIL_EnablePti() is called.
 * There is only one PTI configuration that can be active on a
 * radio, regardless of the number of protocols (unless the application
 * updates the configuration upon a protocol switch -- RAIL does not
 * save the configuration in a protocol RAIL instance).
 *
 * PTI should be configured only when the radio is off (idle).
 *
 * @note On EFR32 platforms GPIO configuration must be unlocked
 *   (see GPIO->LOCK register) to configure or use PTI.
 *
 * @warning As this function relies on GPIO access and RAIL is meant to run in
 *   TrustZone non-secure world, it is not supported if GPIO is configured as
 *   secure peripheral and it will return \ref RAIL_STATUS_INVALID_CALL.
 */
RAIL_Status_t RAIL_ConfigPti(RAIL_Handle_t railHandle,
                             const RAIL_PtiConfig_t *ptiConfig);

/**
 * Get the currently-active PTI configuration.
 *
 * @param[in] railHandle A radio-generic or real RAIL instance handle.
 * @param[out] ptiConfig A non-NULL pointer to the configuration structure
 *   to be filled in with the active PTI configuration.
 * @return RAIL status indicating success of the function call.
 *
 * Although most combinations of configurations can be set, it is safest
 * to call this method after configuration to confirm which values were
 * actually set. This function always returns the active PTI configuration
 * on the radio regardless of the active protocol.
 */
RAIL_Status_t RAIL_GetPtiConfig(RAIL_Handle_t railHandle,
                                RAIL_PtiConfig_t *ptiConfig);

/**
 * Enable Packet Trace Interface (PTI) output of packet data.
 *
 * @param[in] railHandle A radio-generic or real RAIL instance handle.
 * @param[in] enable PTI is enabled if true; disabled if false.
 * @return Status code indicating success of the function call.
 *
 * Similarly to having only one PTI configuration per radio,
 * PTI can only be enabled or disabled for all protocols. It cannot
 * be individually set to enabled and disabled per protocol
 * (unless the application switches it when the protocol switches --
 * RAIL does not save this state in a protocol RAIL instance).
 *
 * PTI should be enabled or disabled only when the radio is off (idle).
 *
 * @warning On EFR32 platforms GPIO configuration must be unlocked
 *   (see GPIO->LOCK register) to configure or use PTI, otherwise a fault
 *   or assert might occur.
 *   If GPIO configuration locking is desired, PTI must be disabled
 *   beforehand either with this function or with \ref RAIL_ConfigPti()
 *   using \ref RAIL_PTI_MODE_DISABLED.
 *
 * @warning As this function relies on GPIO access and RAIL is meant to run in
 *   TrustZone non-secure world, it is not supported if GPIO is configured as
 *   secure peripheral and it will return \ref RAIL_STATUS_INVALID_CALL.
 */
RAIL_Status_t RAIL_EnablePti(RAIL_Handle_t railHandle,
                             bool enable);

/**
 * Set a protocol that RAIL outputs on PTI.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in] protocol The enumeration representing which protocol the app is using.
 * @return Status code indicating success of the function call.
 *
 * The protocol is output via PTI for each packet.
 * Before any protocol is set, the default value is \ref
 * RAIL_PTI_PROTOCOL_CUSTOM. Use one of the enumeration values so that
 * the Network Analyzer can decode the packet.
 *
 * @note This function cannot be called unless the radio is currently in the
 *   \ref RAIL_RF_STATE_IDLE or \ref RAIL_RF_STATE_INACTIVE states. For this
 *   reason, call this function early on before starting radio
 *   operations and not changed later.
 */
RAIL_Status_t RAIL_SetPtiProtocol(RAIL_Handle_t railHandle,
                                  RAIL_PtiProtocol_t protocol);

/**
 * Get the protocol that RAIL outputs on PTI.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @return PTI protocol in use.
 */
RAIL_PtiProtocol_t RAIL_GetPtiProtocol(RAIL_Handle_t railHandle);

/** @} */ // end of group PTI

/******************************************************************************
 * Antenna Control
 *****************************************************************************/
/**
 * @addtogroup Antenna_Control Antenna Control
 * @brief Basic APIs to control the antenna functionality
 * @{
 */
/**
 * Configure antenna path and pin locations.
 *
 * @warning This API must be called before any TX or RX occurs. Otherwise,
 *   the antenna configurations for those functions will not take effect.
 *
 * @param[in] railHandle A radio-generic or real RAIL instance handle.
 * @param[in] config A pointer to a configuration structure applied to the relevant Antenna
 *   Configuration registers. A NULL configuration will produce undefined behavior.
 * @return Status code indicating success of the function call.
 *
 * This function informs RAIL how to select each antenna, but not when.
 * Antenna selection for receive is controlled by the
 * \ref RAIL_RX_OPTION_ANTENNA0 and
 * \ref RAIL_RX_OPTION_ANTENNA1 options
 * (and the \ref RAIL_RX_OPTION_ANTENNA_AUTO combination).
 * Antenna selection for transmit is controlled by the
 * \ref RAIL_TX_OPTION_ANTENNA0 and
 * \ref RAIL_TX_OPTION_ANTENNA1 options.
 *
 * There is only one antenna configuration can be active on a
 * radio, regardless of the number of protocols (unless the application
 * updates the configuration upon a protocol switch --
 * RAIL does not save this configuration in a protocol RAIL instance).
 */
RAIL_Status_t RAIL_ConfigAntenna(RAIL_Handle_t railHandle,
                                 const RAIL_AntennaConfig_t *config);

/**
 * Get the default RF path.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[out] rfPath A pointer to RF path updated by the function.
 * @return Status code indicating success of the function call.
 *
 * If multiple protocols are used, this function returns
 * \ref RAIL_STATUS_INVALID_STATE if it is called and the given railHandle is
 * not active. In that case, the caller must attempt to re-call this function later,
 * for example when \ref RAIL_EVENT_CONFIG_SCHEDULED trigger.
 */
RAIL_Status_t RAIL_GetRfPath(RAIL_Handle_t railHandle, RAIL_AntennaSel_t *rfPath);

/** @} */ // end of group Antenna_Control

/******************************************************************************
 * Radio Configuration
 *****************************************************************************/
/// @addtogroup Radio_Configuration Radio Configuration
/// @brief Routines for setting up and querying radio configuration information.
///
/// These routines allow for runtime flexibility in the radio
/// configuration. Some of the parameters, however, are meant to be generated
/// from the radio calculator in Simplicity Studio. The basic code to configure
/// the radio from this calculator output looks like the example below.
/// @code{.c}
/// // Associate a specific channel configuration with a particular RAIL instance and
/// // load the settings that correspond to the first usable channel.
/// RAIL_ConfigChannels(railHandle, channelConfigs[0]);
/// @endcode
///
/// For more information about the types of parameters that can be changed in
/// the other functions and how to use them, see their individual documentation.
///
/// @{

/**
 * Load a static radio configuration.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in] config A radio configuration array (pointer).
 * @return Status code indicating success of the function call.
 *
 * The configuration passed into this function should be auto-generated
 * and not manually created or edited. By default, do not call this function
 * in RAIL 2.x and later unless instructed by Silicon Labs because it
 * may bypass updating certain RAIL state. In RAIL 2.x and later, the
 * RAIL_ConfigChannels function applies the default radio configuration
 * automatically.
 */
RAIL_Status_t RAIL_ConfigRadio(RAIL_Handle_t railHandle,
                               RAIL_RadioConfig_t config);

/**
 * Modify the currently configured fixed frame length in bytes.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in] length The expected fixed frame length. A value of 0 is infinite.
 *   A value of \ref RAIL_SETFIXEDLENGTH_INVALID restores the frame's length back to
 *   the length specified by the default frame type configuration.
 * @return The new frame length configured into the hardware
 *   for use: 0 if in infinite mode, or \ref RAIL_SETFIXEDLENGTH_INVALID if the frame
 *   length has not yet been overridden by a valid value.
 *
 * Sets the fixed-length configuration for transmit and receive.
 * Be careful when using this function in receive and transmit as this
 * function changes the default frame configuration and remains in force until
 * it is called again with an input value of \ref RAIL_SETFIXEDLENGTH_INVALID. This
 * function will override any fixed or variable length settings from a radio
 * configuration.
 */
uint16_t RAIL_SetFixedLength(RAIL_Handle_t railHandle, uint16_t length);

/**
 * Configure the channels supported by this device.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in] config A pointer to the channel configuration for your device.
 *   This pointer will be cached in the library so it must
 *   exist for the runtime of the application. Typically, this should be
 *   what is stored in Flash by the configuration tool.
 * @param[in] cb A pointer to a function called whenever a radio
 *   configuration change occurs. May be NULL if do not need a callback.
 * @return The first available channel in the configuration.
 *
 * When configuring channels on EFR32, the radio tuner is reconfigured
 * based on the frequency and channel spacing in the channel configuration.
 *
 * @note config can be NULL to simply register or unregister the cb callback
 *   function when using RAIL internal protocol-specific radio configuration
 *   APIs for BLE, IEEE 802.15.4, or Z-Wave, which lack callback specification.
 *   In this use case, 0 is returned.
 */
uint16_t RAIL_ConfigChannels(RAIL_Handle_t railHandle,
                             const RAIL_ChannelConfig_t *config,
                             RAIL_RadioConfigChangedCallback_t cb);

/**
 * Configure the channels supported by this device.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in] config A pointer to the channel configuration for your device.
 *   This pointer will be cached in the library so it must
 *   exist for the runtime of the application. Typically, this should be
 *   what is stored in Flash by the configuration tool.
 * @param[in] cb A pointer to a function called whenever a radio
 *   configuration change occurs. May be NULL if do not need a callback.
 * @return Status code indicating success of the function call.
 *
 * @note Unlike \ref RAIL_ConfigChannels(), this function only caches the
 *   configuration and does not prepare any channel in the configuration. That
 *   action is deferred to the next call to a RAIL API where channel is passed
 *   as a parameter, namely
 * \ref RAIL_PrepareChannel(), \ref RAIL_StartTx(),
 * \ref RAIL_StartScheduledTx(), \ref RAIL_StartCcaCsmaTx(),
 * \ref RAIL_StartCcaLbtTx(), \ref RAIL_StartScheduledCcaCsmaTx(),
 * \ref RAIL_StartScheduledCcaLbtTx(), \ref RAIL_StartRx(),
 * \ref RAIL_ScheduleRx(), \ref RAIL_StartAverageRssi(),
 * \ref RAIL_StartTxStream().
 *
 * @note config can be NULL to simply register or unregister the cb callback
 *   function when using RAIL internal protocol-specific radio configuration
 *   APIs for BLE, IEEE 802.15.4, or Z-Wave, which lack callback specification.
 */
RAIL_Status_t RAIL_ConfigChannelsAlt(RAIL_Handle_t railHandle,
                                     const RAIL_ChannelConfig_t *config,
                                     RAIL_RadioConfigChangedCallback_t cb);

/**
 * Get verbose listing of channel metadata for the current channel configuration.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[out] channelMetadata A pointer to an app-allocated array that
 *   will be populated with channel metadata.
 * @param[in,out] length A pointer to the number of entries available
 *   in the channelMetadata array.
 *   This value will be updated to the number of channels written to the array,
 *   not to exceed the length number passed in.
 * @param[in] minChannel Minimum channel number about which to collect data.
 * @param[in] maxChannel Maximum channel number about which to collect data.
 * @return Status code indicating success of the function call.
 *   \ref RAIL_STATUS_INVALID_PARAMETER means that,
 *   based on the currently active radio configuration, there are more
 *   channels to write than there is space provided in the allocated
 *   channelMetadata. However, the channel metadata that was written is valid.
 *   \ref RAIL_STATUS_INVALID_STATE indicates that the channel configuration
 *   has not been configured. \ref RAIL_STATUS_NO_ERROR indicates complete
 *   success.
 */
RAIL_Status_t RAIL_GetChannelMetadata(RAIL_Handle_t railHandle,
                                      RAIL_ChannelMetadata_t *channelMetadata,
                                      uint16_t *length,
                                      uint16_t minChannel,
                                      uint16_t maxChannel);

/**
 * Check whether the channel exists in the current RAIL channel configuration.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in] channel A channel number to check.
 * @return \ref RAIL_STATUS_NO_ERROR if channel exists or \ref
 *   RAIL_STATUS_INVALID_PARAMETER if the given channel does not exist.
 */
RAIL_Status_t RAIL_IsValidChannel(RAIL_Handle_t railHandle,
                                  uint16_t channel);

/**
 * Cause radio settings associated with a particular channel to be applied to
 * hardware.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in] channel The channel to prepare for use.
 * @return \ref RAIL_STATUS_NO_ERROR on success or
 *   \ref RAIL_STATUS_INVALID_PARAMETER if the given channel does not have an
 *   associated channel configuration entry.
 *
 * This function walks the current \ref RAIL_ChannelConfig_t::configs list
 * and applies the configuration associated with the specified channel if
 * found.
 * This function manually changes channels without starting a TX or RX
 * operation.
 *
 * When successful, the radio is idled.
 * When unsuccessful, the radio state will not be altered.
 */
RAIL_Status_t RAIL_PrepareChannel(RAIL_Handle_t railHandle, uint16_t channel);

/**
 * Return the most-recently requested RAIL channel.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[out] channel A pointer to the channel for which RAIL was
 *   most-recently configured.
 * @return \ref RAIL_STATUS_NO_ERROR on success or
 *   \ref RAIL_STATUS_INVALID_CALL if the radio is not configured for any channel
 *   or \ref RAIL_STATUS_INVALID_PARAMETER if channel parameter is NULL.
 *
 * This function returns the channel most recently specified in API calls that
 * pass in a channel to tune to, namely \ref RAIL_PrepareChannel(),
 * \ref RAIL_StartTx(), \ref RAIL_StartScheduledTx(), \ref RAIL_StartCcaCsmaTx(),
 * \ref RAIL_StartCcaLbtTx(), \ref RAIL_StartScheduledCcaCsmaTx(),
 * \ref RAIL_StartScheduledCcaLbtTx(), \ref RAIL_StartRx(), \ref RAIL_ScheduleRx(),
 * \ref RAIL_StartAverageRssi(), \ref RAIL_StartTxStream(), \ref RAIL_StartTxStreamAlt().
 * It doesn't follow changes RAIL performs implicitly during channel hopping
 * and mode switch.
 */
RAIL_Status_t RAIL_GetChannel(RAIL_Handle_t railHandle, uint16_t *channel);

/**
 * Return the RAIL channel to which the radio is currently tuned.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[out] channel A pointer to the currently-tuned channel.
 * @return \ref RAIL_STATUS_NO_ERROR on success or
 *   \ref RAIL_STATUS_INVALID_CALL if the radio is not configured for any channel
 *   or \ref RAIL_STATUS_INVALID_PARAMETER if channel parameter is NULL.
 *
 * This function returns the channel to which the radio is currently tuned if
 * the specified RAIL handle is active. It returns the channel to which it
 * will be tuned during the next protocol switch if the handle is inactive.
 * The channel returned may be different than what \ref RAIL_GetChannel
 * returns when channel hopping or mode switch are involved.
 */
RAIL_Status_t RAIL_GetChannelAlt(RAIL_Handle_t railHandle, uint16_t *channel);

/**
 * Return the symbol rate for the current PHY.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @return The symbol rate in symbols per second or 0.
 *
 * The symbol rate is the rate of symbol changes over the air. For non-DSSS
 * PHYs, this is the same as the baudrate. For DSSS PHYs, it is the baudrate
 * divided by the length of a chipping sequence. For more information,
 * see the modem calculator documentation. If the rate cannot be
 * calculated, this function returns 0.
 */
uint32_t RAIL_GetSymbolRate(RAIL_Handle_t railHandle);

#ifndef DOXYGEN_SHOULD_SKIP_THIS
/**
 * Calculate the symbol rate for the current PHY.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @return The symbol rate in symbols per second or 0.
 *
 * This function calculates the symbol rate when the radio configuration does
 * not include that information. In general, this function should be
 * implemented automatically in the radio configuration as a stub.
 */
uint32_t RAILCb_CalcSymbolRate(RAIL_Handle_t railHandle);
#endif//DOXYGEN_SHOULD_SKIP_THIS

/**
 * Return the bit rate for the current PHY.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @return The bit rate in bits per second or 0.
 *
 * The bit rate is the effective over-the-air data rate. It does not account
 * for extra spreading for forward error correction, and so on, but
 * accounts for modulation schemes, DSSS, and other configurations. For more
 * information, see the modem calculator documentation. If the rate cannot be
 * calculated, this function returns 0.
 */
uint32_t RAIL_GetBitRate(RAIL_Handle_t railHandle);

#ifndef DOXYGEN_SHOULD_SKIP_THIS
/**
 * Calculate the bit rate for the current PHY.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @return The bit rate in bits per second or 0.
 *
 * This function calculates the bit rate when the radio configuration does
 * not include that information. In general, this function should be
 * implemented automatically in the radio configuration as a stub.
 */
uint32_t RAILCb_CalcBitRate(RAIL_Handle_t railHandle);
#endif//DOXYGEN_SHOULD_SKIP_THIS

/**
 * Set the PA capacitor tune value for transmit and receive.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in] txPaCtuneValue PA Ctune value for TX mode.
 * @param[in] rxPaCtuneValue PA Ctune value for RX mode.
 * @return Status code indicating success of the function call.
 *
 * Tunes the impedance of the transmit
 * and receive modes by changing the amount of capacitance at
 * the PA output.
 * Changes made to the TX Power configuration, e.g., calling \ref RAIL_ConfigTxPower,
 * will undo changes made to PA capacitor tune value for transmit and receive
 * via \ref RAIL_SetPaCTune.
 *
 * @note This function does nothing on EFR32 Series 2 devices.
 */
RAIL_Status_t RAIL_SetPaCTune(RAIL_Handle_t railHandle,
                              uint8_t txPaCtuneValue,
                              uint8_t rxPaCtuneValue);

/**
 * Get the sync words and their length.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[out] syncWordConfig An application-provided non-NULL pointer to store
 *   \ref RAIL_SyncWordConfig_t sync word information.
 * @return Status code indicating success of the function call.
 **/
RAIL_Status_t RAIL_GetSyncWords(RAIL_Handle_t railHandle,
                                RAIL_SyncWordConfig_t *syncWordConfig);

/**
 * Set the selected sync words and their length.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in] syncWordConfig A non-NULL pointer to \ref RAIL_SyncWordConfig_t
 *   specifying the sync words and their length.
 *   The desired length should be between 2 and 32 bits inclusive, however it is
 *   recommended to not change the length below what the PHY sync word length is
 *   configured to be. Changing the sync word length, especially to that which is
 *   lower than the default length, may result in a decrease in packet reception
 *   rate or may not work at all.
 *   Other values will result in \ref RAIL_STATUS_INVALID_PARAMETER. The default
 *   sync word continues to be valid.
 * @return Status code indicating success of the function call.
 *
 * When the custom sync word(s) applied by this API are no longer needed, or to
 * revert to default sync word, calling \ref RAIL_ConfigChannels() will re-establish
 * the sync words specified in the radio configuration.
 *
 * This function will return \ref RAIL_STATUS_INVALID_STATE if called when BLE
 * has been enabled for this railHandle. When changing sync words in BLE mode,
 * use \ref RAIL_BLE_ConfigChannelRadioParams() instead.
 *
 * @note If multiple protocols share the same radio configuration, the user
 *   should not set custom sync words in any of those protocols as these
 *   sync words could leak into the other protocol sharing the same radio
 *   configuration.
 **/
RAIL_Status_t RAIL_ConfigSyncWords(RAIL_Handle_t railHandle,
                                   const RAIL_SyncWordConfig_t *syncWordConfig);

/**
 * Sets the whitening initialization value.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @return The whitening initialization value currently being used.
 */
uint16_t RAIL_GetWhiteningInitVal(RAIL_Handle_t railHandle);

/**
 * Returns the CRC initialization value.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @return The CRC initialization value currently being used.
 */
uint32_t RAIL_GetCrcInitVal(RAIL_Handle_t railHandle);

/**
 * Sets the whitening initialization value.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in] whiteInit A whitening initialization value.
 * @return Status code indicating success of the function call.
 *
 * Use this function to override the whitening initialization value
 * defined by the current PHY's radio configuration. The new value
 * will persist until this function is called again, \ref
 * RAIL_ResetWhiteningInitVal() is called, or the PHY is
 * changed.
 *
 * @note Overriding a PHY's whitening initialization value
 *   will break communication with peers unless they effect
 *   a similar change.
 *
 * @warning This API must not be used when either 802.15.4
 *   or BLE modes are enabled.
 */
RAIL_Status_t RAIL_SetWhiteningInitVal(RAIL_Handle_t railHandle,
                                       uint16_t whiteInit);

/**
 * Sets the CRC initialization value.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in] crcInit A CRC initialization value.
 * @return Status code indicating success of the function call.
 *
 * Use this function to override the CRC initialization value
 * defined by the current PHY's radio configuration. The new value
 * will persist until this function is called again, \ref
 * RAIL_ResetCrcInitVal() is called, or the PHY is changed.
 *
 * @note Overriding a PHY's CRC initialization value
 *   will break communication with peers unless they effect
 *   a similar change.
 *
 * @warning This API must not be used when either 802.15.4
 *   or BLE modes are enabled.
 */
RAIL_Status_t RAIL_SetCrcInitVal(RAIL_Handle_t railHandle,
                                 uint32_t crcInit);

/**
 * Restores the whitening initialization value to its initial setting
 * from the Radio Configurator.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @return Status code indicating success of the function call.
 *
 * Can use this function after using \ref RAIL_SetWhiteningInitVal().
 */
RAIL_Status_t RAIL_ResetWhiteningInitVal(RAIL_Handle_t railHandle);

/**
 * Restores the CRC initialization value to its initial setting from
 * the Radio Configurator.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @return Status code indicating success of the function call.
 *
 * Can use this function after using \ref RAIL_SetCrcInitVal().
 */
RAIL_Status_t RAIL_ResetCrcInitVal(RAIL_Handle_t railHandle);

/** @} */ // end of group Radio_Configuration

/******************************************************************************
 * Timing Information
 *****************************************************************************/
/// @addtogroup System_Timing System Timing
/// @brief Functionality related to the RAIL timer and general system time.
///
/// These functions can be used to get information about the current system time
/// or to manipulate the RAIL timer.
///
/// The system time returned by \ref RAIL_GetTime() is in the same timebase that is
/// used throughout RAIL. Any callbacks or structures that provide a timestamp,
/// such as \ref RAIL_RxPacketDetails_t::timeReceived, will use the same timebase
/// as will any APIs that accept an absolute time for scheduling their action.
/// Throughout the documentation, the timebase is referred to as the RAIL
/// timebase. The timebase is currently a value in microseconds from \ref
/// RAIL_Init() time, which means that it will wrap every 1.19 hours.
/// (`(2^32 - 1) / (3600 sec/hr * 1000000 us/sec)`).
///
/// The provided timer is hardware-backed and interrupt-driven. It can be used
/// for timing any event in the system, but is especially helpful for
/// timing protocol-based state machines and other systems that interact with
/// the radio. To avoid processing the expiration in interrupt
/// context, leave the cb parameter passed to \ref RAIL_SetTimer() as NULL and poll
/// for expiration with the \ref RAIL_IsTimerExpired() function. See below for an
/// example of the interrupt driven method of interacting with the timer.
/// @code{.c}
/// void timerCb(RAIL_Handle_t cbArg)
/// {
///   // Timer callback action
/// }
///
/// void main(void)
/// {
///   // Initialize RAIL ...
///
///   // Set up a timer for 1 ms from now
///   RAIL_SetTimer(railHandle, 1000, RAIL_TIME_RELATIVE, &timerCb);
///
///   // Run main loop
///   while(1);
/// }
/// @endcode
///
/// If multiple software timers are needed to be run off of the one available
/// hardware timer, enable a software multiplexing layer within RAIL
/// using the \ref RAIL_ConfigMultiTimer() function. This will allow you to
/// set up as many timers as you want using the RAIL_*MultiTimer() functions.
/// See the example below for using the multitimer functionality.
/// @code{.c}
/// // Declare timer structures in global space or somewhere that will exist
/// // until the callback has fired
/// RAIL_MultiTimer_t tmr1, tmr2;
///
/// void timerCb(RAIL_MultiTimer_t *tmr,
///              RAIL_Time_t expectedTimeOfEvent,
///              void *cbArg)
/// {
///   if (tmr == tmr1) {
///     // Timer 1 action
///   } else {
///     // Timer 2 action
///   }
/// }
///
/// void main(void)
/// {
///   // Initialize RAIL ...
///
///   RAIL_ConfigMultiTimer(true);
///
///   // Set up one timer for 1 ms from now and one at time 2000000 in the RAIL
///   // timebase
///   RAIL_SetMultiTimer(&tmr1, 1000, RAIL_TIME_RELATIVE, &timerCb, NULL);
///   RAIL_SetMultiTimer(&tmr2, 2000000, RAIL_TIME_ABSOLUTE, &timerCb, NULL);
///
///   // Run main loop
///   while(1);
/// }
/// @endcode
///
/// @{

/**
 * Get the current RAIL time.
 *
 * @return The RAIL time in microseconds. Note that this wraps
 *   after about 1.19 hours since it's stored in a 32 bit value.
 *
 * Returns the current time in the RAIL timebase (microseconds). It can be
 * used to compare with packet timestamps or to schedule transmits.
 */
RAIL_Time_t RAIL_GetTime(void);

/**
 * Set the current RAIL time.
 *
 * @param[in] time Set the RAIL timebase to this value in microseconds.
 * @return Status code indicating the success of the function call.
 *
 * @warning Use this API only for testing purposes or in
 *   very limited circumstances during RAIL Timer Synchronization.
 *   Undefined behavior can result by calling it in multiprotocol or
 *   when the radio is not idle or timed events are active. Applications
 *   using \ref RAIL_GetTime() may not be designed for discontinuous
 *   changes to the RAIL time base.
 */
RAIL_Status_t RAIL_SetTime(RAIL_Time_t time);

/**
 * Blocking delay routine for a specified number of microseconds.
 *
 * @param[in] microseconds Delay duration in microseconds.
 * @return Status code indicating success of the function call.
 *
 * Use this RAIL API only for short blocking delays because it has less overhead
 * than calling RAIL_GetTime() in a loop.
 *
 * @note Passing large delay values may give unpredictable results or trigger
 *   the Watchdog reset.
 *   \n Also, this function will start the clocks required for the RAIL timebase if they
 *   are not running, except between \ref RAIL_Sleep() and \ref RAIL_Wake()
 *   where the timer must remain stopped.
 *   \n Interrupts are not disabled during the delay, so the delay may be longer if an
 *   interrupt extends beyond the delay duration.
 */
RAIL_Status_t RAIL_DelayUs(RAIL_Time_t microseconds);

/**
 * Schedule a timer to expire using the RAIL timebase.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in] time The timer's expiration time in the RAIL timebase.
 * @param[in] mode Indicates whether the time argument is an absolute
 *   RAIL time or relative to the current RAIL time. Specifying mode
 *   \ref RAIL_TIME_DISABLED is the same as calling \ref RAIL_CancelTimer().
 * @param[in] cb A pointer to a callback function that RAIL will call
 *   when the timer expires. May be NULL if no callback is desired.
 * @return \ref RAIL_STATUS_NO_ERROR on success and
 *   \ref RAIL_STATUS_INVALID_PARAMETER if the timer can't be scheduled.
 *
 * Configures a timer to expire after a period in the RAIL timebase.
 * This timer can be used to implement low-level protocol features.
 *
 * @warning Attempting to schedule the timer when it is
 *   still running from a previous request is bad practice, unless the cb
 *   callback is identical to that used in the previous request, in which case
 *   the timer is rescheduled to the new time. Note that if the original timer
 *   expires as it is being rescheduled, the callback may or may not occur. It
 *   is generally good practice to cancel a running timer before rescheduling
 *   it to minimize ambiguity.
 */
RAIL_Status_t RAIL_SetTimer(RAIL_Handle_t railHandle,
                            RAIL_Time_t time,
                            RAIL_TimeMode_t mode,
                            RAIL_TimerCallback_t cb);

/**
 * Return the absolute time that the RAIL timer was configured to expire.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @return The absolute time that this timer was set to expire.
 *
 * Provides the absolute time regardless of the \ref RAIL_TimeMode_t that
 * was passed into \ref RAIL_SetTimer(). Note that the time might be in the
 * past if the timer has already expired. The return value is undefined if the
 * timer was never set.
 */
RAIL_Time_t RAIL_GetTimer(RAIL_Handle_t railHandle);

/**
 * Stop the currently scheduled RAIL timer.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @return \ref RAIL_STATUS_NO_ERROR on success and
 *   \ref RAIL_STATUS_INVALID_CALL if the timer is not running.
 *
 * Cancels the timer. If this function is called before the timer expires,
 * the cb callback specified in the earlier RAIL_SetTimer() call will never
 * be called.
 */
RAIL_Status_t RAIL_CancelTimer(RAIL_Handle_t railHandle);

/**
 * Check whether the RAIL timer has expired.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @return true if the previously scheduled timer has expired and false
 *   otherwise.
 *
 * Polling with this function is an alternative to the callback.
 */
bool RAIL_IsTimerExpired(RAIL_Handle_t railHandle);

/**
 * Check whether the RAIL timer is currently running.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @return true if the timer is running and false if
 *   the timer has expired or was never set.
 */
bool RAIL_IsTimerRunning(RAIL_Handle_t railHandle);

/**
 * Configure the RAIL software timer feature.
 *
 * @param[in] enable Enables/disables the RAIL multitimer.
 * @return true if the multitimer was successfully enabled/disabled, false
 *   otherwise.
 *
 * Turning this on will add a software timer layer above the physical RAIL timer
 * so that the user can have as many timers as desired. It is not necessary to
 * call this function if the MultiTimer APIs are not used.
 *
 * @note This function must be called before calling \ref RAIL_SetMultiTimer().
 *   This function is a no-op on multiprotocol as this layer is already used
 *   under the hood.
 *   Do not call this function while the RAIL timer is running.
 *   Call \ref RAIL_IsTimerRunning() before enabling/disabling the multitimer.
 *   If the multitimer is not needed, do not call this function to
 *   allow the multitimer code to be dead stripped. If the multitimer is
 *   enabled for use, the multitimer and timer APIs can both be used.
 *   However, no timer can be in use while this function is being called.
 */
bool RAIL_ConfigMultiTimer(bool enable);

/**
 * Start a multitimer instance.
 *
 * @param[in,out] tmr A pointer to the timer instance to start.
 * @param[in] expirationTime A time when the timer is set to expire.
 * @param[in] expirationMode Select mode of expirationTime. See \ref
 *   RAIL_TimeMode_t.
 * @param[in] callback A function to call on timer expiry. See \ref
 *   RAIL_MultiTimerCallback_t. May be NULL if no callback is desired.
 * @param[in] cbArg An extra callback function parameter for the user application.
 * @return
 *   \ref RAIL_STATUS_NO_ERROR on success.@n
 *   \ref RAIL_STATUS_INVALID_PARAMETER if tmr has an illegal value or if
 *   timeout is in the past.
 *
 * @note It is legal to start an already running timer. If this is done,
 *   the timer will first be stopped before the new configuration is applied.
 *   If expirationTime is 0, the callback is called immediately.
 */
RAIL_Status_t RAIL_SetMultiTimer(RAIL_MultiTimer_t *tmr,
                                 RAIL_Time_t expirationTime,
                                 RAIL_TimeMode_t expirationMode,
                                 RAIL_MultiTimerCallback_t callback,
                                 void *cbArg);

/**
 * Stop the currently scheduled RAIL multitimer.
 *
 * @param[in,out] tmr A pointer to a RAIL timer instance.
 * @return true if the timer was successfully canceled;
 *   false if the timer was not running.
 *
 * Cancels the timer. If this function is called before the timer expires,
 * the cb callback specified in the earlier \ref RAIL_SetTimer() call will never
 * be called.
 */
bool RAIL_CancelMultiTimer(RAIL_MultiTimer_t *tmr);

/**
 * Check if a given timer is running.
 *
 * @param[in] tmr A pointer to the timer instance.
 * @return true if the timer is running; false if the timer is not running
 *    or tmr is not a timer instance.
 */
bool RAIL_IsMultiTimerRunning(RAIL_MultiTimer_t *tmr);

/**
 * Check if a given timer has expired.
 *
 * @param[in] tmr A pointer to the timer instance.
 * @return true if the timer has expired or tmr is not a timer instance;
 *   false if the timer is running.
 */
bool RAIL_IsMultiTimerExpired(RAIL_MultiTimer_t *tmr);

/**
 * Get time left before a given timer instance expires.
 *
 * @param[in] tmr A pointer to the timer instance to query.
 * @param[in] timeMode Indicates how the function provides the time
 *   remaining. By choosing \ref
 *   RAIL_TimeMode_t::RAIL_TIME_ABSOLUTE, the function returns the
 *   absolute expiration time, and by choosing \ref
 *   RAIL_TimeMode_t::RAIL_TIME_DELAY, the function returns the
 *   amount of time remaining before the timer's expiration.
 * @return
 *   Time left expressed in RAIL's time units.
 *   0 if the timer is not running or has already expired.
 */
RAIL_Time_t RAIL_GetMultiTimer(RAIL_MultiTimer_t *tmr,
                               RAIL_TimeMode_t timeMode);

/** @} */ // end of group System_Timing

/******************************************************************************
 * Sleep APIs
 *****************************************************************************/
/// @addtogroup Sleep
/// @brief These APIs help when putting the system to an EM2/EM3/EM4 sleep
/// states where the high frequency clock is disabled.
/// @{
///
/// The RAIL library has its own timebase and the ability to schedule operations
/// into the future. When going to any power mode that disables the HF clock
/// used for the radio (EM2/EM3/EM4), it is important that this timebase is
/// synchronized to a running LFCLK and the chip is set to wake up before the
/// next scheduled event.
/// If RAIL has not been configured to use the power manager,
/// \ref RAIL_Sleep() and \ref RAIL_Wake() must be called for performing this
/// synchronization.
/// If RAIL has been configured to use the power manager,
/// \ref RAIL_InitPowerManager(), it will automatically perform timer
/// synchronization based on the selected \ref RAIL_TimerSyncConfig_t. Calls to
/// \ref RAIL_Sleep() and \ref RAIL_Wake() are unsupported in such a scenario.
///
/// Following example code snippets demonstrate synchronizing the timebase
/// with and without timer synchronization:
///
/// <b>Sleep with timer synchronization:</b>
///
/// When sleeping with timer synchronization, you must first get the required
/// LFCLK up and running and leave it running across sleep so that the high
/// frequency clock that drives the RAIL time base can be synchronized to it.
/// The \ref RAIL_Sleep() API will also set up a wake event on the timer to wake
/// up wakeupProcessTime before the next timer event so that it can run successfully.
/// See the \ref efr32_main sections on Low-Frequency Clocks and RAIL Timer
/// Synchronization for more setup details.
///
/// This is useful when maintaining packet timestamps
/// across sleep or use the scheduled RX/TX APIs while sleeping in between. It
/// does take more time and code to do the synchronization. If your
/// application does not need this, it should be avoided.
///
/// Example (without Power Manager):
/// @code{.c}
/// #include "rail.h"
///
/// extern RAIL_Handle_t railHandle;
/// // Wakeup time for your crystal/board/chip combination
/// extern uint32_t wakeupProcessTime;
///
/// void main(void)
/// {
///   RAIL_Status_t status;
///   bool shouldSleep = false;
///
///   // This function depends on your board/chip but it must enable the LFCLK
///   // you intend to use for RTCC sync before we configure sleep as that function
///   // will attempt to auto detect the clock.
///   BoardSetupLFCLK()
///
///   // Configure sleep for timer synchronization
///   RAIL_TimerSyncConfig_t timerSyncConfig = RAIL_TIMER_SYNC_DEFAULT;
///   status = RAIL_ConfigSleepAlt(railHandle, &timerSyncConfig);
///   assert(status == RAIL_STATUS_NO_ERROR);
///
///   // Application main loop
///   while(1) {
///     // ... do normal app stuff and set shouldSleep to true when we want to
///     // sleep
///     if (shouldSleep) {
///       bool sleepAllowed = false;
///
///       // Go critical to assess sleep decisions
///       CORE_ENTER_CRITICAL();
///       if (RAIL_Sleep(wakeupProcessTime, &sleepAllowed) != RAIL_STATUS_NO_ERROR) {
///         printf("Error trying to go to sleep!");
///         CORE_EXIT_CRITICAL();
///         continue;
///       }
///       if (sleepAllowed) {
///         // Go to sleep
///       }
///       // Wakeup and sync the RAIL timebase back up
///       RAIL_Wake(0);
///       CORE_EXIT_CRITICAL();
///     }
///   }
/// }
/// @endcode
///
/// Example (with Power Manager):
/// @code{.c}
/// #include "rail.h"
/// #include "sl_power_manager.h"
///
/// extern RAIL_Handle_t railHandle;
///
/// void main(void)
/// {
///   RAIL_Status_t status;
///   bool shouldSleep = false;
///
///   // This function depends on your board/chip but it must enable the LFCLK
///   // you intend to use for RTCC sync before we configure sleep as that function
///   // will attempt to auto detect the clock.
///   BoardSetupLFCLK();
///   // Configure sleep for timer synchronization
///   RAIL_TimerSyncConfig_t timerSyncConfig = RAIL_TIMER_SYNC_DEFAULT;
///   status = RAIL_ConfigSleepAlt(railHandle, &timerSyncConfig);
///   assert(status == RAIL_STATUS_NO_ERROR);
///   // Initialize application-level power manager service
///   sl_power_manager_init();
///   // Initialize RAIL library's use of the power manager
///   RAIL_InitPowerManager();
///
///   // Application main loop
///   while(1) {
///     // ... do normal app stuff and set shouldSleep to true when we want to
///     // sleep
///     if (shouldSleep) {
///       // Let the CPU go to sleep if the system allows it.
///       sl_power_manager_sleep();
///     }
///   }
/// }
/// @endcode
///
/// RAIL APIs such as, \ref RAIL_StartScheduledTx(), \ref RAIL_ScheduleRx(),
/// \ref RAIL_SetTimer(), \ref RAIL_SetMultiTimer() can be used to schedule periodic
/// wakeups to perform a scheduled operation. The call to
/// sl_power_manager_sleep() in the main loop ensures that the device sleeps
/// until the scheduled operation is due.
/// Upon completion, each instantaneous or scheduled RX/TX operation will
/// indicate radio busy to the power manager to allow the application to
/// service the RAIL event and perform subsequent operations before going to
/// sleep. Therefore, it is important that the application idle the radio by either
/// calling \ref RAIL_Idle() or \ref RAIL_YieldRadio().
/// If the radio transitions to RX after an RX or TX operation,
/// always call \ref RAIL_Idle() in order transition to a lower sleep state.
/// If the radio transitions to idle after an RX or TX operation,
/// \ref RAIL_YieldRadio() should suffice in indicating to the power manager
/// that the radio is no longer busy and the device can sleep.
///
/// The following example shows scheduling periodic TX on getting a TX completion
/// event:
/// @code{.c}
/// void RAILCb_Event(RAIL_Handle_t railHandle, RAIL_Events_t events)
/// {
///   // Omitting other event handlers
///   if (events & RAIL_EVENTS_TX_COMPLETION) {
///     // Schedule the next TX.
///     RAIL_ScheduleTxConfig_t config = {
///       .when = (RAIL_Time_t)parameters->startTime,
///       .mode = (RAIL_TimeMode_t)parameters->startTimeMode
///     };
///     (void)RAIL_StartScheduledTx(railHandle, channel, 0, &config, NULL);
///   }
/// }
/// @endcode
///
/// @note The above code assumes that RAIL automatic state transitions after TX
///   are idle. Use \ref RAIL_SetTxTransitions() to ensure the right state
///   transitions are used. Radio must be idle for the device to enter EM2 or lower
///   energy mode.
///
/// @note When using the power manager, usage of \ref RAIL_YieldRadio() in
///   single protocol RAIL is similar to its usage in multiprotocol RAIL.
///   See \ref rail_radio_scheduler_yield for more details.
///
/// @note Back to back scheduled operations do not require an explicit call to
///   \ref RAIL_YieldRadio() if the radio transitions to idle.
///
/// <b>Sleep without timer synchronization:</b>
///
/// When sleeping without timer synchronization, you are free to enable only the
/// LFCLKs and wake sources required by the application. RAIL will not attempt
/// to configure any wake events and may miss anything that occurs over sleep.
///
/// This is useful when your application does not care about
/// packet timestamps or scheduling operations accurately over sleep.
///
/// Example (without Power Manager):
/// @code{.c}
/// #include "rail.h"
///
/// extern RAIL_Handle_t railHandle;
///
/// void main(void)
/// {
///   RAIL_Status_t status;
///   bool shouldSleep = false;
///
///   // Configure sleep for no timer synchronization
///   RAIL_TimerSyncConfig_t timerSyncConfig = {
///     .sleep = RAIL_SLEEP_CONFIG_TIMERSYNC_DISABLED,
///   };
///   status = RAIL_ConfigSleepAlt(railHandle, &timerSyncConfig);
///   assert(status == RAIL_STATUS_NO_ERROR);
///
///   // Application main loop
///   while(1) {
///     // ... do normal app stuff and set shouldSleep to true when we want to
///     // sleep
///     if (shouldSleep) {
///       bool sleepAllowed = false;
///       uint32_t sleepTime = 0;
///
///       // Go critical to assess sleep decisions
///       CORE_ENTER_CRITICAL();
///       if (RAIL_Sleep(0, &sleepAllowed) != RAIL_STATUS_NO_ERROR) {
///         printf("Error trying to go to sleep!");
///         CORE_EXIT_CRITICAL();
///         continue;
///       }
///       if (sleepAllowed) {
///         // Go to sleep and optionally update sleepTime to the correct value
///         // in microseconds
///       }
///       // Wakeup and sync the RAIL timebase back up
///       RAIL_Wake(sleepTime);
///       CORE_EXIT_CRITICAL();
///     }
///   }
/// }
/// @endcode
///
/// Example (with Power Manager):
/// @code{.c}
/// #include "rail.h"
/// #include "sl_power_manager.h"
///
/// extern RAIL_Handle_t railHandle;
///
/// void main(void)
/// {
///   RAIL_Status_t status;
///   bool shouldSleep = false;
///
///   // This function depends on your board/chip but it must enable the LFCLK
///   // you intend to use for RTCC sync before we configure sleep as that function
///   // will attempt to auto detect the clock.
///   BoardSetupLFCLK();
///   // Configure sleep for no timer synchronization
///   RAIL_TimerSyncConfig_t timerSyncConfig = {
///     .sleep = RAIL_SLEEP_CONFIG_TIMERSYNC_DISABLED,
///   };
///   status = RAIL_ConfigSleepAlt(railHandle, &timerSyncConfig);
///   assert(status == RAIL_STATUS_NO_ERROR);
///   // Initialize application-level power manager service
///   sl_power_manager_init();
///   // Initialize RAIL library's use of the power manager
///   RAIL_InitPowerManager();
///
///   // Application main loop
///   while(1) {
///     // ... do normal app stuff and set shouldSleep to true when we want to
///     // sleep
///     if (shouldSleep) {
///       // Let the CPU go to sleep if the system allows it.
///       sl_power_manager_sleep();
///     }
///   }
/// }
/// @endcode
/**
 * Configure RAIL timer synchronization. This function is optional to implement.
 *
 * @param[in,out] timerSyncConfig A pointer to the \ref RAIL_TimerSyncConfig_t
 *   structure containing the configuration parameters for timer sync. The
 *   \ref RAIL_TimerSyncConfig_t::sleep field is ignored in this call.
 *
 * This function is called during \ref RAIL_ConfigSleep() to allow an application
 * to configure the PRS and RTCC channels used for timer sync to values other
 * than their defaults. The default channels are populated in timerSyncConfig and
 * can be overwritten by the application. If this function is not implemented by the
 * application, a default implementation from within the RAIL library will be used
 * that simply maintains the default channel values in timerSyncConfig.
 * For example:
 * @code{.c}
 * void RAILCb_ConfigSleepTimerSync(RAIL_TimerSyncConfig_t *timerSyncConfig)
 * {
 *   timerSyncConfig->prsChannel = MY_TIMERSYNC_PRS_CHANNEL;
 *   timerSyncConfig->rtccChannel = MY_TIMERSYNC_RTCC_CHANNEL;
 * }
 * @endcode
 *
 * If an unsupported channel is selected by the application, \ref RAIL_ConfigSleep()
 * will return \ref RAIL_STATUS_INVALID_PARAMETER.
 */
void RAILCb_ConfigSleepTimerSync(RAIL_TimerSyncConfig_t *timerSyncConfig);

/**
 * Initialize RAIL timer synchronization.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in] sleepConfig A sleep configuration.
 * @return Status code indicating success of the function call.
 *
 * @warning As this function relies on PRS and SYSRTC access and RAIL is meant
 *   to run in TrustZone non-secure world, it is not supported if PRS or SYSRTC
 *   are configured as secure peripheral and sleepConfig is set to
 *   \ref RAIL_SleepConfig_t::RAIL_SLEEP_CONFIG_TIMERSYNC_ENABLED. It will
 *   return \ref RAIL_STATUS_INVALID_CALL.
 */
RAIL_Status_t RAIL_ConfigSleep(RAIL_Handle_t railHandle,
                               RAIL_SleepConfig_t sleepConfig);

/**
 * Initialize RAIL timer synchronization.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in] syncConfig A non-NULL pointer to the timer synchronization configuration.
 * @return Status code indicating success of the function call.
 *
 * The default structure used to enable timer synchronization across sleep is
 * \ref RAIL_TIMER_SYNC_DEFAULT.
 *
 * @warning As this function relies on PRS and SYSRTC access and RAIL is meant
 *   to run in TrustZone non-secure world, it is not supported if PRS or SYSRTC
 *   are configured as secure peripheral and syncConfig->sleep is set to
 *   \ref RAIL_SleepConfig_t::RAIL_SLEEP_CONFIG_TIMERSYNC_ENABLED. It will
 *   return \ref RAIL_STATUS_INVALID_CALL.
 */
RAIL_Status_t RAIL_ConfigSleepAlt(RAIL_Handle_t railHandle,
                                  const RAIL_TimerSyncConfig_t *syncConfig);

/**
 * Stop the RAIL timer(s) and prepare RAIL for sleep.
 *
 * @param[in] wakeupProcessTime Time in microseconds that the application
 *   and hardware need to recover from sleep state.
 * @param[out] deepSleepAllowed A pointer to boolean that will be set
 *   true if system can go to deep sleep or false if system must not go
 *   to deep sleep (EM2 or lower energy modes).
 * @return Status code indicating success of the function call.
 *
 * @warning The active RAIL configuration must be idle to enable sleep.
 *
 * @note This API must not be called if RAIL Power Manager is initialized.
 */
RAIL_Status_t RAIL_Sleep(uint16_t wakeupProcessTime, bool *deepSleepAllowed);

/**
 * Wake RAIL from sleep and restart the RAIL timer(s).
 *
 * @param[in] elapsedTime Add this sleep duration in microseconds
 *   to the RAIL timer(s) before restarting it(them).
 * @return Status code indicating success of the function call.
 *
 * If the timer sync was enabled by \ref RAIL_ConfigSleep(), synchronize the RAIL
 * timer(s) using an alternate timer. Otherwise, add elapsedTime to the RAIL
 * timer(s).
 *
 * @note This API must not be called if RAIL Power Manager is initialized.
 */
RAIL_Status_t RAIL_Wake(RAIL_Time_t elapsedTime);

/**
 * Initialize RAIL Power Manager.
 *
 * @return Status code indicating success of the function call.
 *
 * @note This function must be called only when the application is built
 *   and initialized with Power Manager plugin and when the radio is idle.
 *   RAIL will perform timer synchronization, upon transitioning from EM2 or
 *   lower to EM1 or higher energy mode or vice-versa, in the Power Manager EM
 *   transition callback.
 *
 * @warning Since EM transition callbacks are not called in a deterministic
 *   order, it is suggested to not call any RAIL time dependent APIs
 *   in an EM transition callback.
 *
 * @warning As this function relies on EMU access and RAIL is meant to run in
 *   TrustZone non-secure world, it is not supported if EMU is configured as
 *   secure peripheral and it will return \ref RAIL_STATUS_INVALID_CALL.
 */
RAIL_Status_t RAIL_InitPowerManager(void);

/**
 * Stop the RAIL Power Manager.
 *
 * @return Status code indicating success of the function call.
 *
 * @note The active RAIL configuration must be idle to disable radio
 *   power manager and there should be no outstanding requirements by
 *   radio power manager.
 */
RAIL_Status_t RAIL_DeinitPowerManager(void);

/** @} */ // end of group Sleep

/******************************************************************************
 * Events
 *****************************************************************************/
/**
 * @addtogroup Events
 * @brief APIs related to events
 * @{
 */

/**
 * Configure radio events.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in] mask A bitmask of events to configure.
 * @param[in] events A bitmask of events to trigger \ref RAIL_Config_t::eventsCallback.
 * @return Status code indicating success of the function call.
 *
 * Sets up which radio interrupts generate a RAIL event. The full list of
 * events is in \ref RAIL_Events_t.
 */
RAIL_Status_t RAIL_ConfigEvents(RAIL_Handle_t railHandle,
                                RAIL_Events_t mask,
                                RAIL_Events_t events);

/** @} */ // end of group Events

/******************************************************************************
 * Data Management
 *****************************************************************************/
/// @addtogroup Data_Management Data Management
/// @brief Data management functions
///
/// These functions allow the application to choose how data is presented to
/// the application. RAIL provides data in a packet-based method or in a
/// FIFO-based method. As originally conceived,
/// \ref RAIL_DataMethod_t::PACKET_MODE was designed for handling packets
/// that fit within RAIL's FIFOs while \ref RAIL_DataMethod_t::FIFO_MODE
/// was designed for handling packets larger than RAIL's FIFOs could hold.
/// Conceptually it is still useful to think of these modes this way, but
/// functionally their distinction has become blurred by improvements in
/// RAIL's flexibility -- applications now have much more control over both
/// receive and transmit FIFO sizes, and the FIFO-management and threshold
/// APIs and related events are no longer restricted to \ref
/// RAIL_DataMethod_t::FIFO_MODE operation but can be used in \ref
/// RAIL_DataMethod_t::PACKET_MODE too.
///
/// The application can configure RAIL data management through \ref
/// RAIL_ConfigData(). This function allows the application to specify the type
/// of radio data (\ref RAIL_TxDataSource_t and \ref RAIL_RxDataSource_t) and
/// the method of interacting with data (\ref RAIL_DataMethod_t). By default,
/// RAIL configures TX and RX both with packet data source and \ref
/// RAIL_DataMethod_t::PACKET_MODE.
///
/// For transmit, \ref RAIL_DataMethod_t::PACKET_MODE and \ref
/// RAIL_DataMethod_t::FIFO_MODE are functionally the same:
///   - When not actively transmitting, load a packet's initial transmit
///     data using \ref RAIL_WriteTxFifo() with reset set to true. Alternatively
///     this data copying can be avoided by changing the transmit FIFO to an
///     already-loaded section of memory with \ref RAIL_SetTxFifo().
///   - When actively transmitting, load remaining transmit data with
///     \ref RAIL_WriteTxFifo() with reset set to false.
///   - If transmit packets exceed the FIFO size, set the transmit FIFO
///     threshold through \ref RAIL_SetTxFifoThreshold(). The \ref
///     RAIL_Config_t::eventsCallback with \ref RAIL_EVENT_TX_FIFO_ALMOST_EMPTY
///     will occur telling the application to load more TX packet data, if
///     needed, to prevent a \ref RAIL_EVENT_TX_UNDERFLOW event from occurring.
///     One can get how much space is available in the transmit FIFO for more
///     transmit data through \ref RAIL_GetTxFifoSpaceAvailable().
///   - After transmit completes, the transmit FIFO can be manually reset
///     with \ref RAIL_ResetFifo(), but this should rarely be necessary.
///
/// The transmit FIFO is specified by the application and its size is
/// the value returned from the most recent call to \ref RAIL_SetTxFifo().
/// The transmit FIFO is edge-based in that it only provides the \ref
/// RAIL_EVENT_TX_FIFO_ALMOST_EMPTY event once when the threshold is crossed
/// in the emptying direction.
///
/// For receive, the distinction between \ref RAIL_DataMethod_t::PACKET_MODE
/// and \ref RAIL_DataMethod_t::FIFO_MODE basically boils down to how
/// unsuccessfully-received packets are handled. In \ref
/// RAIL_DataMethod_t::PACKET_MODE, data from such packets is automatically
/// rolled back as if the packet was never received, while in \ref
/// RAIL_DataMethod_t::FIFO_MODE, rollback does not occur putting more onus
/// on the application to deal with that data.
///
/// In receive \ref RAIL_DataMethod_t::PACKET_MODE data management:
///   - Packet lengths are determined from the Radio Configurator configuration
///     and can be read out at the end using \ref RAIL_GetRxPacketInfo().
///   - Received packet data is made available on successful packet completion
///     via \ref RAIL_Config_t::eventsCallback with \ref
///     RAIL_EVENT_RX_PACKET_RECEIVED which can then use \ref RAIL_GetRxPacketInfo()
///     and \ref RAIL_GetRxPacketDetailsAlt() to access packet information and
///     \ref RAIL_PeekRxPacket() to access packet data.
///   - FILTERED, ABORTED, or FRAMEERROR received packet data is automatically
///     rolled back (dropped) without the application needing to worry about
///     consuming it.
///     The application can choose to not even be bothered with the events
///     related to such packets: \ref RAIL_EVENT_RX_ADDRESS_FILTERED,
///     \ref RAIL_EVENT_RX_PACKET_ABORTED, or \ref RAIL_EVENT_RX_FRAME_ERROR.
///
/// In receive \ref RAIL_DataMethod_t::FIFO_MODE data management:
///   - Packet Lengths are determined from the Radio Configurator configuration
///     or by application knowledge of packet payload structure.
///   - Received data can be retrieved prior to packet completion through
///     \ref RAIL_ReadRxFifo() and is never rolled back on FILTERED, ABORTED, or
///     FRAMEERROR packets. The application should enable and handle these
///     events so it can flush any packet data it's already retrieved.
///   - After packet completion, remaining packet data for FILTERED, ABORTED,
///     or FRAMEERROR packets remains in the FIFO and the appropriate event is
///     triggered to the user. This data may be consumed in the callback unlike
///     in packet mode where it is automatically rolled back. At the end of the
///     callback all remaining data in the FIFO will be cleaned up as usual.
///     Keep in mind that \ref RAIL_GetRxPacketDetailsAlt() provides full packet
///     detailed information only for successfully received packets.
///
/// Common receive data management features:
///   - Set the receive FIFO threshold through \ref RAIL_SetRxFifoThreshold(). The
///     \ref RAIL_Config_t::eventsCallback with \ref RAIL_EVENT_RX_FIFO_ALMOST_FULL
///     will occur telling the application to consume some RX packet data to
///     prevent a \ref RAIL_EVENT_RX_FIFO_OVERFLOW event from occurring.
///   - Get receive FIFO count information through
///     \ref RAIL_GetRxPacketInfo(\ref RAIL_RX_PACKET_HANDLE_NEWEST)
///     (or \ref RAIL_GetRxFifoBytesAvailable()).
///   - After receive completes and all its data has been consumed, the receive
///     FIFO can be manually reset with \ref RAIL_ResetFifo(), though this should
///     rarely be necessary and should only be done with the radio idle.
///
/// When trying to determine an appropriate threshold, the application needs
/// to know the size of each FIFO. The default receive FIFO is internal to RAIL
/// with a size of 512 bytes. This can be changed, however, using
/// \ref RAIL_SetRxFifo() and the default may be removed entirely by calling
/// this from the \ref RAILCb_SetupRxFifo() callback. The receive FIFO event is
/// level-based in that the \ref RAIL_EVENT_RX_FIFO_ALMOST_FULL event will
/// constantly pend if the threshold is exceeded. This normally means that
/// inside this event's callback, the application should empty enough of the FIFO
/// to go under the threshold. To defer reading the FIFO to main context, the
/// application can disable or re-enable the receive FIFO threshold event using
/// \ref RAIL_ConfigEvents() with the mask \ref RAIL_EVENT_RX_FIFO_ALMOST_FULL.
///
/// The receive FIFO can store multiple packets and processing of a packet can
/// be deferred from the RAIL event callback to main-loop processing
/// by using \ref RAIL_HoldRxPacket() in the event callback and
/// \ref RAIL_ReleaseRxPacket() in the main-loop.
/// On some platforms, the receive FIFO is supplemented by an internal
/// fixed-size packet metadata FIFO that limits the number of packets
/// RAIL and applications can hold onto for deferred processing.
/// See chip-specific documentation, such as \ref efr32_main, for more
/// information.
///
/// @note When using multiprotocol the receive FIFO is reset
///   prior to a protocol switch so held packets will be lost if not processed
///   before then.
///
/// While \ref RAIL_EVENT_RX_FIFO_ALMOST_FULL occurs solely based on the
/// state of the receive FIFO used for packet data, both
/// \ref RAIL_EVENT_RX_FIFO_FULL and \ref RAIL_EVENT_RX_FIFO_OVERFLOW
/// can occur coincident with packet completion when either that or the
/// internal packet metadata FIFO fills or overflows.
/// \ref RAIL_EVENT_RX_FIFO_FULL informs the application it should
/// immediately process and free up the oldest packets/data to make room
/// for new packets/data, reducing the possibility of packet/data loss
/// and \ref RAIL_EVENT_RX_FIFO_OVERFLOW.
///
/// Before a packet is fully received you can always use \ref
/// RAIL_PeekRxPacket() to look at the contents. In FIFO mode, you may also
/// consume its data with \ref RAIL_ReadRxFifo(). Remember that none of these
/// APIs will read across a packet boundary (even in FIFO mode) so you will
/// need to handle each received packet individually.
///
/// While RAIL defaults to \ref RAIL_DataMethod_t::PACKET_MODE, the
/// application can explicitly initialize RAIL for \ref
/// RAIL_DataMethod_t::PACKET_MODE in the following manner:
/// @code{.c}
/// extern RAIL_Handle_t railHandle;
///
/// void configRailForPacketModeOperation(void)
/// {
///   RAIL_DataConfig_t railDataConfig = {
///     .txSource = TX_PACKET_DATA,
///     .rxSource = RX_PACKET_DATA,
///     .txMethod = PACKET_MODE,
///     .rxMethod = PACKET_MODE,
///   };
///
///   (void) RAIL_ConfigData(railHandle, &railDataConfig);
///
///   // Events that can occur in Packet Mode:
///   //    RAIL_EVENT_TX_PACKET_SENT
///   //    RAIL_EVENT_RX_PACKET_RECEIVED
///   // and optionally (packet data automatically dropped):
///   //    RAIL_EVENT_RX_ADDRESS_FILTERED
///   //    RAIL_EVENT_RX_PACKET_ABORTED
///   //    RAIL_EVENT_RX_FRAME_ERROR
///   // and if enabled:
///   //   RAIL_EVENT_TX_UNDERFLOW
///   //   RAIL_EVENT_TXACK_UNDERFLOW
///   //   RAIL_EVENT_TX_FIFO_ALMOST_EMPTY
///   //   RAIL_EVENT_RX_FIFO_ALMOST_FULL
/// }
/// @endcode
///
/// Initializing RAIL for \ref RAIL_DataMethod_t::FIFO_MODE requires a few
/// more function calls:
/// @code{.c}
/// extern RAIL_Handle_t railHandle;
///
/// void config_rail_for_fifo_mode_operation(void)
/// {
///   RAIL_DataConfig_t railDataConfig = {
///     .txSource = TX_PACKET_DATA,
///     .rxSource = RX_PACKET_DATA,
///     .txMethod = FIFO_MODE,
///     .rxMethod = FIFO_MODE,
///   };
///
///   (void) RAIL_ConfigData(railHandle, &railDataConfig);
///
///   // Gets the size of the FIFOs.
///   // Assume that the transmit and receive FIFOs are the same size
///   uint16_t fifoSize = RAIL_GetTxFifoSpaceAvailable(railHandle);
///
///   // Sets the transmit and receive FIFO thresholds.
///   // For this example, set the threshold in the middle of each FIFO.
///   (void) RAIL_SetRxFifoThreshold(railHandle, fifoSize / 2);
///   (void) RAIL_SetTxFifoThreshold(railHandle, fifoSize / 2);
///
///   // Events that can occur in FIFO mode:
///   //   RAIL_EVENT_TX_FIFO_ALMOST_EMPTY
///   //   RAIL_EVENT_TX_UNDERFLOW
///   //   RAIL_EVENT_TXACK_UNDERFLOW
///   //   RAIL_EVENT_TX_PACKET_SENT
///   //   RAIL_EVENT_RX_FIFO_ALMOST_FULL
///   //   RAIL_EVENT_RX_FIFO_OVERFLOW
///   //   RAIL_EVENT_RX_ADDRESS_FILTERED
///   //   RAIL_EVENT_RX_PACKET_ABORTED
///   //   RAIL_EVENT_RX_FRAME_ERROR
///   //   RAIL_EVENT_RX_PACKET_RECEIVED
/// }
/// @endcode
///
/// On receive, an application can use a different \ref RAIL_RxDataSource_t that
/// is only compatible with \ref RAIL_DataMethod_t::FIFO_MODE. All that differs
/// from the FIFO mode example above is the RAIL_DataConfig_t::rxSource setting.
/// IQ data samples are taken at the hardware's oversample rate and the amount
/// of data can easily overwhelm the CPU processing time. The sample rate
/// depends on the chosen PHY, as determined by the data rate and the decimation
/// chain. It is <b>not</b> recommended to use the IQ data source with sample
/// rates above 300 k samples/second because the CPU might not be able to keep up
/// with the data stream. Depending on the application and the needed CPU
/// bandwidth, slower data rates may be required. On EFR32xG22 and later
/// platforms, it is recommended to reset the RX buffer before initiating a
/// receive for all modes except \ref RAIL_RxDataSource_t::RX_PACKET_DATA since
/// the RX buffer has to be 32-bit aligned. If the buffer is <b>not</b> reset
/// but is 32-bit aligned, capture is performed on the remaining space available.
/// If the buffer is <b>not</b> reset and is <b>not</b> 32-bit aligned, then
/// RAIL_ConfigData() returns \ref RAIL_STATUS_INVALID_STATE.
/// @code{.c}
/// // Reset RX buffer (EFR32xG22 and later platforms)
/// RAIL_ResetFifo(railHandle, false, true);
///
/// // IQ data is provided into the receive FIFO.
/// RAIL_DataConfig_t railDataConfig = {
///   .txSource = TX_PACKET_DATA,
///   .rxSource = RX_IQDATA_FILTLSB,
///   .txMethod = FIFO_MODE,
///   .rxMethod = FIFO_MODE,
/// };
///
/// // IQ data comes in the following format when reading out of the FIFO:
/// //------------------------------------
/// // I[LSB] | I[MSB] | Q[LSB] | Q[MSB] |
/// //------------------------------------
/// @endcode
///
/// @{

/**
 * RAIL data management configuration
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in] dataConfig A pointer to a non-NULL RAIL data configuration structure.
 * @return Status code indicating success of the function call.
 *
 * This function configures how RAIL manages data. The application can
 * configure RAIL to receive data in a packet-based or FIFO-based manner.
 * \ref RAIL_DataMethod_t::FIFO_MODE is necessary to receive packets larger
 * than the radio's receive FIFO. It is also required for receive data
 * sources other than \ref RAIL_RxDataSource_t::RX_PACKET_DATA.
 *
 * Generally with \ref RAIL_DataMethod_t::FIFO_MODE, the application sets
 * appropriate FIFO thresholds via \ref RAIL_SetTxFifoThreshold() and
 * \ref RAIL_SetRxFifoThreshold() and then enables and handles the
 * \ref RAIL_EVENT_TX_FIFO_ALMOST_EMPTY event callback (to feed more packet
 * data via \ref RAIL_WriteTxFifo() before the FIFO underflows) and the \ref
 * RAIL_EVENT_RX_FIFO_ALMOST_FULL event callback (to consume packet data
 * via \ref RAIL_ReadRxFifo() before the receive FIFO overflows).
 *
 * When configuring TX for \ref RAIL_DataMethod_t::FIFO_MODE, this
 * function resets the transmit FIFO. When configuring TX or RX for
 * \ref RAIL_DataMethod_t::PACKET_MODE, this function will reset
 * the corresponding FIFO thresholds such that they won't trigger the
 * \ref RAIL_EVENT_RX_FIFO_ALMOST_FULL or \ref RAIL_EVENT_TX_FIFO_ALMOST_EMPTY
 * events.
 *
 * When \ref RAIL_DataConfig_t::rxMethod is set to \ref
 * RAIL_DataMethod_t::FIFO_MODE, the radio won't drop packet data of
 * aborted or CRC error packets, but will present it to the application
 * to deal with accordingly. On completion of erroneous packets, the
 * \ref RAIL_Config_t::eventsCallback with \ref RAIL_EVENT_RX_PACKET_ABORTED,
 * \ref RAIL_EVENT_RX_FRAME_ERROR, or \ref RAIL_EVENT_RX_ADDRESS_FILTERED will
 * tell the application it can drop any data it read via \ref RAIL_ReadRxFifo() during reception.
 * For CRC error packets when the \ref RAIL_RX_OPTION_IGNORE_CRC_ERRORS
 * RX option is in effect, the application should check for that from the
 * \ref RAIL_RxPacketStatus_t obtained by calling \ref RAIL_GetRxPacketInfo().
 * RAIL will automatically flush any remaining packet data after reporting
 * one of these packet completion events or the application can explicitly
 * flush it by calling \ref RAIL_ReleaseRxPacket().
 *
 * When \ref RAIL_DataConfig_t::rxMethod is set to \ref
 * RAIL_DataMethod_t::PACKET_MODE, the radio will roll back (drop) all packet
 * data associated with aborted packets including those with CRC errors
 * (unless configured to ignore CRC errors via the
 * \ref RAIL_RX_OPTION_IGNORE_CRC_ERRORS RX option). The application will
 * never have to deal with packet data from these packets.
 * In either mode, the application can set RX options as needed.
 *
 * When \ref RAIL_DataConfig_t::rxSource is set to a value other than
 * \ref RX_PACKET_DATA and \ref RAIL_Config_t::eventsCallback
 * \ref RAIL_EVENT_RX_FIFO_OVERFLOW is enabled RX will be terminated
 * if a RX FIFO overflow occurs. If \ref RAIL_EVENT_RX_FIFO_OVERFLOW
 * is not enabled, data will be discarded until the overflow condition
 * is resolved. To continue capturing data RX must be restarted using
 * \ref RAIL_StartRx().
 *
 */
RAIL_Status_t RAIL_ConfigData(RAIL_Handle_t railHandle,
                              const RAIL_DataConfig_t *dataConfig);

/**
 * Write data to the transmit FIFO previously established by RAIL_SetTxFifo().
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in] dataPtr A pointer to transmit data.
 * @param[in] writeLength A number of bytes to write to the transmit FIFO.
 * @param[in] reset If true, resets transmit FIFO before writing the data.
 * @return The number of bytes written to the transmit FIFO.
 *
 * This function copies writeLength bytes of data from the provided dataPtr into the
 * transmit FIFO previously established by \ref RAIL_SetTxFifo() or \ref RAIL_Init().
 * If the requested writeLength exceeds the current number of bytes open
 * in the transmit FIFO, the function only writes until the transmit FIFO
 * is full. The function returns the number of bytes written to the transmit
 * FIFO or returns zero if railHandle is NULL or if the transmit FIFO is full.
 *
 * @note The protocol's packet configuration, as set up by the radio
 *   configurator or via \ref RAIL_SetFixedLength(), determines how many
 *   bytes of data are consumed from the transmit FIFO for a successful transmit
 *   operation, not the writeLength value passed in. If not enough data has
 *   been put into the transmit FIFO, a \ref RAIL_EVENT_TX_UNDERFLOW event will
 *   occur. If too much data is put into the transmit FIFO, the extra data will
 *   either become the first bytes
 *   sent in a subsequent packet, or will be thrown away if the FIFO gets
 *   reset prior to the next transmit. In general, the proper number of
 *   packet bytes to put into the transmit FIFO are all payload bytes except
 *   for any CRC bytes, which the packet configuration causes to be sent
 *   automatically.
 *
 * @note This function does not utilize a critical section but, depending on the
 *   application, calling it within a critical section could be appropriate.
 */
uint16_t RAIL_WriteTxFifo(RAIL_Handle_t railHandle,
                          const uint8_t *dataPtr,
                          uint16_t writeLength,
                          bool reset);

/**
 * Set the address of the transmit FIFO, a circular buffer used for TX data,
 * possibly pre-populated with transmit data.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in,out] addr An appropriately-aligned (see below) pointer to a read-write memory
 *   location in RAM used as the transmit FIFO. This memory must persist until the next
 *   call to this function or \ref RAIL_SetTxFifoAlt.
 * @param[in] initLength A number of initial bytes already in the transmit FIFO.
 * @param[in] size A desired size of the transmit FIFO in bytes.
 * @return The transmit FIFO size in bytes, 0 if an error occurs.
 *
 * This function sets the memory location for the transmit FIFO. \ref RAIL_SetTxFifo or
 * \ref RAIL_SetTxFifoAlt must be called at least once before any transmit operations occur.
 *
 * FIFO size can be determined by the return value of this function. The
 * chosen size is determined based on the available FIFO sizes supported by the
 * hardware. Similarly, some hardware has stricter FIFO alignment requirements;
 * 32-bit alignment provides the maximum portability across all RAIL platforms.
 * For more on supported FIFO sizes and alignments, see chip-specific
 * documentation, such as \ref efr32_main. The returned FIFO size will be the
 * closest allowed size less than or equal to the passed in size parameter,
 * unless the size parameter is smaller than the minimum FIFO size, in that case
 * 0 is returned. If the initLength parameter is larger than the returned
 * size, the FIFO will be filled up to its size.
 *
 * A user may write to the custom memory location directly before calling this
 * function, or use \ref RAIL_WriteTxFifo() to write to the memory location after
 * calling this function. Users must specify the initLength for
 * previously-written memory to be set in the transmit FIFO.
 *
 * This function reserves the block of RAM starting at addr with a length of the
 * returned FIFO size, which is used internally as a circular buffer for the
 * transmit FIFO. It must be able to hold the entire FIFO size. The caller must
 * guarantee that the custom FIFO remains intact and unchanged (except via calls
 * to \ref RAIL_WriteTxFifo()) until the next call to this function.
 *
 * @note The protocol's packet configuration, as set up by the radio
 *   configurator or via RAIL_SetFixedLength(), determines how many
 *   bytes of data are consumed from the transmit FIFO for a successful transmit
 *   operation, not the initLength value passed in. If not enough data has
 *   been put into the transmit FIFO, a \ref RAIL_EVENT_TX_UNDERFLOW event will
 *   occur. If too much data is put into the transmit FIFO, the extra data
 *   will either become the first bytes
 *   sent in a subsequent packet, or will be thrown away if the FIFO gets
 *   reset prior to the next transmit. In general, the proper number of
 *   packet bytes to put into the transmit FIFO are all payload bytes except
 *   for any CRC bytes which the packet configuration causes to be sent
 *   automatically.
 */
uint16_t RAIL_SetTxFifo(RAIL_Handle_t railHandle,
                        uint8_t *addr,
                        uint16_t initLength,
                        uint16_t size);

/**
 * Set the address of the transmit FIFO, a circular buffer used for TX data which
 * can start at offset distance from the FIFO base address.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in,out] addr An appropriately-aligned (see \ref RAIL_SetTxFifo description)
 *   pointer to a read-write memory location in RAM used as the transmit FIFO. This memory
 *   must persist until the next call to this function or \ref RAIL_SetTxFifo.
 * @param[in] startOffset A number of bytes defining the start position of the TX data
 *   from the transmit FIFO base address, only valid if initLength is not 0.
 * @param[in] initLength The number of valid bytes already in the transmit FIFO after startOffset.
 * @param[in] size A desired size of the transmit FIFO in bytes.
 * @return The transmit FIFO size in bytes, 0 if an error occurs.
 *
 * This function is similar to \ref RAIL_SetTxFifo except a startOffset can be specified
 * to indicate where the transmit packet data starts. This allows an application to
 * place unaligned initial packet data within the aligned transmit FIFO (initLength > 0).
 * Specifying a startOffset will not reduce the FIFO threshold or affect
 * \ref RAIL_GetTxFifoSpaceAvailable().
 * \ref RAIL_SetTxFifo or \ref RAIL_SetTxFifoAlt must be called at least once before any transmit
 * operations occur.
 * FIFO size handling is quite same as \ref RAIL_SetTxFifo. Only difference is that if the
 * initLength plus startOffset parameters are larger than the returned size, the FIFO
 * will be filled up to its size from startOffset.
 * Note that the startOffset is essentially forgotten after the next transmit --
 * i.e. it applies onto to the next transmit operation, and is not re-established when
 * the transmit FIFO is reset.
 */
uint16_t RAIL_SetTxFifoAlt(RAIL_Handle_t railHandle,
                           uint8_t *addr,
                           uint16_t startOffset,
                           uint16_t initLength,
                           uint16_t size);

/**
 * Set the address of the receive FIFO, a circular buffer used for receive data.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in,out] addr A pointer to a read-write memory location in RAM used as
 *   the receive FIFO. This memory must persist until the next call to this
 *   function.
 * @param[in,out] size A pointer to the desired size of the receive
 *   FIFO in bytes. This will be updated with the actual size during the
 *   function call.
 * @return Status code indicating success of the function call.
 *
 * This function sets the memory location for the receive FIFO. It
 * must be called at least once before any receive operations occur.
 *
 * @note After it is called, any prior receive FIFO is orphaned. To avoid
 *   orphaning the default internal 512-byte receive FIFO so it does
 *   not unnecessarily consume RAM resources in your application,
 *   implement \ref RAILCb_SetupRxFifo() to call this function.
 *
 * FIFO size can be determined by the return value of this function. The
 * chosen size is determined based on the available FIFO sizes supported by the
 * hardware. Similarly, some hardware has stricter FIFO alignment requirements;
 * 32-bit alignment provides the maximum portability across all RAIL platforms.
 * For more on supported FIFO sizes and alignments, see chip-specific
 * documentation, such as \ref efr32_main. The returned FIFO size will be the
 * closest allowed size less than or equal to the passed in size parameter,
 * unless the size parameter is smaller than the minimum FIFO size.
 *
 * This function reserves the block of RAM starting at addr with a length
 * of size, which is used internally as a circular buffer for the receive FIFO.
 * It must be able to hold the entire FIFO size. The caller must guarantee that
 * the custom FIFO remains intact and unchanged (except via incoming packet data
 * being written) until the next call to this function.
 *
 * In multiprotocol, RAIL currently shares one receive FIFO across all
 * protocols. This function will return \ref RAIL_STATUS_INVALID_STATE if the
 * requested \ref RAIL_Handle_t is not active.
 */
RAIL_Status_t RAIL_SetRxFifo(RAIL_Handle_t railHandle,
                             uint8_t *addr,
                             uint16_t *size);

/// Set up the receive FIFO to use. This function is optional to implement.
///
/// @param[in] railHandle A RAIL instance handle.
/// @return Status code indicating success of the function call.
///
/// This callback is called during the \ref RAIL_Init() process to set up the FIFO
/// to use for received packets. If not implemented by the application,
/// a default implementation from within the RAIL library will be used to
/// initialize an internal default 512-byte receive FIFO.
///
/// If this function returns an error, the RAIL_Init() process will fail.
///
/// During this function, the application should generally call
/// \ref RAIL_SetRxFifo(). If that does not happen, the application needs to
/// set up the receive FIFO via a call to \ref RAIL_SetRxFifo() before attempting
/// to receive any packets. An example implementation may look like the following:
/// @code{.c}
/// #define RX_FIFO_BYTES 1024
/// static __ALIGNED(RAIL_FIFO_ALIGNMENT) uint8_t rxFifo[RX_FIFO_BYTES];
///
/// RAIL_Status_t RAILCb_SetupRxFifo(RAIL_Handle_t railHandle)
/// {
///   uint16_t rxFifoBytes = RX_FIFO_BYTES;
///   RAIL_Status_t status = RAIL_SetRxFifo(railHandle, &rxFifo[0], &rxFifoBytes);
///   if (rxFifoBytes != RX_FIFO_BYTES) {
///     // We set up an incorrect FIFO size
///     return RAIL_STATUS_INVALID_PARAMETER;
///   }
///   if (status == RAIL_STATUS_INVALID_STATE) {
///     // Allow failures due to multiprotocol
///     return RAIL_STATUS_NO_ERROR;
///   }
///   return status;
/// }
/// @endcode
RAIL_Status_t RAILCb_SetupRxFifo(RAIL_Handle_t railHandle);

/**
 * Read packet data from RAIL's receive FIFO.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[out] dataPtr An application-provided pointer to store data.
 *   If NULL, the data is thrown away rather than copied out.
 * @param[in] readLength A number of packet bytes to read from the FIFO.
 * @return The number of packet bytes read from the receive FIFO.
 *
 * This function reads packet data from the head of receive FIFO and
 * writes it to the provided dataPtr. It does not permit reading more
 * data than is available in the FIFO, nor does it permit reading more
 * data than remains in the oldest unreleased packet.
 *
 * Because this function does not have a critical section, use it
 * only in one context or make sure function calls are protected to prevent
 * buffer corruption.
 *
 * @warning This function is intended for use only with \ref
 *   RAIL_DataMethod_t::FIFO_MODE and should never be called in \ref
 *   RAIL_DataMethod_t::PACKET_MODE where it could lead to receive FIFO
 *   corruption.
 *
 * @note When reading data from an arriving packet that is not yet complete,
 *   keep in mind its data is highly suspect because it has not yet passed
 *   any CRC integrity checking. Also note that the packet could be aborted,
 *   canceled, or fail momentarily, invalidating its data in Packet mode.
 *   Furthermore, there is a small chance towards the end of packet reception
 *   that the receive FIFO could include not only packet data received so far,
 *   but also some raw radio-appended info detail bytes that RAIL's
 *   packet-completion processing will subsequently deal with. It's up to the
 *   application to know its packet format well enough to avoid reading this
 *   info because it will corrupt the packet's details and possibly corrupt the
 *   receive FIFO.
 */
uint16_t RAIL_ReadRxFifo(RAIL_Handle_t railHandle,
                         uint8_t *dataPtr,
                         uint16_t readLength);

/**
 * Configure the RAIL transmit FIFO almost empty threshold.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in] txThreshold The threshold below which the
 *   \ref RAIL_EVENT_TX_FIFO_ALMOST_EMPTY event will fire.
 * @return Configured transmit FIFO threshold value.
 *
 * This function configures the threshold for the transmit FIFO. When the
 * number of bytes in the transmit FIFO falls below the configured threshold,
 * \ref RAIL_Config_t::eventsCallback will fire with \ref
 * RAIL_EVENT_TX_FIFO_ALMOST_EMPTY set.
 * The txThreshold value should be smaller than or equal to the transmit
 * FIFO size; higher values will be pegged to the FIFO size.
 * A value of 0 or \ref RAIL_FIFO_THRESHOLD_DISABLED will disable the
 * threshold, returning \ref RAIL_FIFO_THRESHOLD_DISABLED.
 */
uint16_t RAIL_SetTxFifoThreshold(RAIL_Handle_t railHandle,
                                 uint16_t txThreshold);

/**
 * Configure the RAIL receive FIFO almost full threshold.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in] rxThreshold The threshold above which the
 *   \ref RAIL_EVENT_RX_FIFO_ALMOST_FULL event will fire.
 * @return Configured receive FIFO threshold value.
 *
 * This function configures the threshold for the receive FIFO. When the
 * number of bytes of packet data in the receive FIFO exceeds the
 * configured threshold, \ref RAIL_Config_t::eventsCallback will keep
 * firing with \ref RAIL_EVENT_RX_FIFO_ALMOST_FULL set as long as the
 * number of bytes in the receive FIFO exceeds the configured threshold
 * value. The rxThreshold value should be smaller than the receive FIFO
 * size; anything else, including a value of
 * \ref RAIL_FIFO_THRESHOLD_DISABLED, will disable the threshold,
 * returning \ref RAIL_FIFO_THRESHOLD_DISABLED.
 *
 * @note To avoid sticking in the event handler (even in idle state):
 *   1. Disable the event (via the config events API or the
 *      \ref RAIL_FIFO_THRESHOLD_DISABLED parameter).
 *   2. Increase FIFO threshold.
 *   3. Read the FIFO (that's not an option in
 *      \ref RAIL_DataMethod_t::PACKET_MODE) in the event handler.
 */
uint16_t RAIL_SetRxFifoThreshold(RAIL_Handle_t railHandle,
                                 uint16_t rxThreshold);

/**
 * Get the RAIL transmit FIFO almost empty threshold value.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @return Configured TX Threshold value in bytes.
 *
 * Retrieves the configured TX threshold value.
 */
uint16_t RAIL_GetTxFifoThreshold(RAIL_Handle_t railHandle);

/**
 * Get the RAIL receive FIFO almost full threshold value.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @return Configured RX Threshold value in bytes.
 *
 * Retrieves the configured RX threshold value.
 */
uint16_t RAIL_GetRxFifoThreshold(RAIL_Handle_t railHandle);

/**
 * Reset the RAIL transmit and/or receive FIFOs.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in] txFifo If true, reset the transmit FIFO.
 * @param[in] rxFifo If true, reset the receive FIFO and its internal metadata FIFO.
 * @return Status code indicating success of the function call.
 *
 * This function can reset each FIFO independently.
 * The application should not reset the receive FIFO while receiving a frame,
 * nor should it reset the transmit FIFO while transmitting a frame.
 */
RAIL_Status_t RAIL_ResetFifo(RAIL_Handle_t railHandle, bool txFifo, bool rxFifo);

/**
 * Get the number of bytes used in the receive FIFO.
 * Only use this function in RX \ref RAIL_DataMethod_t::FIFO_MODE.
 * Apps should use \ref RAIL_GetRxPacketInfo() instead.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @return Number of bytes used in the receive FIFO.
 *
 * This function indicates how much packet-related data exists in the receive
 * FIFO that could be read.
 *
 * @note The number of bytes returned may not just reflect the current
 *   packet's data but could also include raw appended info bytes added
 *   after successful packet reception and bytes from subsequently received
 *   packets. It is up to the app to never try to consume more than the
 *   packet's actual data when using the value returned here in a subsequent
 *   call to \ref RAIL_ReadRxFifo(), otherwise the receive FIFO will be corrupted.
 */
uint16_t RAIL_GetRxFifoBytesAvailable(RAIL_Handle_t railHandle);

/**
 * Get the number of bytes unused in the transmit FIFO.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @return Number of bytes unused in the transmit FIFO.
 *
 * This function indicates how much space is available in the transmit FIFO
 * for writing additional packet data.
 */
uint16_t RAIL_GetTxFifoSpaceAvailable(RAIL_Handle_t railHandle);

/** @} */ // end of group Data_Management

/******************************************************************************
 * State Transitions
 *****************************************************************************/
/**
 * @addtogroup State_Transitions State Transitions
 * @{
 */

/**
 * Configure RAIL automatic state transitions after RX.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in] transitions A pointer to the state transitions to apply after reception.
 * @return Status code indicating success of the function call.
 *
 * This function fails if unsupported transitions are passed in or if the
 * radio is currently in the RX state. Success can transition to TX, RX, or
 * IDLE, while error can transition to RX or IDLE. The timings of state
 * transitions from the RX state are not guaranteed when packets are longer
 * than 16 seconds on-air.
 */
RAIL_Status_t RAIL_SetRxTransitions(RAIL_Handle_t railHandle,
                                    const RAIL_StateTransitions_t *transitions);

/**
 * Get the current RAIL automatic state transitions after RX.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[out] transitions A pointer to the state transitions that RAIL applies after receive.
 * @return Status code indicating a success of the function call.
 *
 * Retrieves the current state transitions after RX and stores them in the
 * transitions argument.
 */
RAIL_Status_t RAIL_GetRxTransitions(RAIL_Handle_t railHandle,
                                    RAIL_StateTransitions_t *transitions);

/**
 * Configure RAIL automatic state transitions after TX.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in] transitions A pointer to the state transitions to apply after transmission.
 * @return Status code indicating a success of the function call.
 *
 * This function fails if unsupported transitions are passed in or if the
 * radio is currently in the TX state. Success and error can each transition
 * to RX or IDLE only, not TX. For the ability to run repeated transmits, see
 * \ref RAIL_SetNextTxRepeat(). Calling this function will clear any repeated
 * transmissions set up by \ref RAIL_SetNextTxRepeat().
 */
RAIL_Status_t RAIL_SetTxTransitions(RAIL_Handle_t railHandle,
                                    const RAIL_StateTransitions_t *transitions);

/**
 * Get the current RAIL automatic state transitions after TX.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[out] transitions A pointer to the state transitions that RAIL applies after transmission.
 * @return Status code indicating a success of the function call.
 *
 * Retrieves the current state transitions after TX and stores them in the
 * transitions argument.
 */
RAIL_Status_t RAIL_GetTxTransitions(RAIL_Handle_t railHandle,
                                    RAIL_StateTransitions_t *transitions);

/**
 * Set up automatic repeated transmits after the next transmit.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in] repeatConfig A pointer to the configuration structure for repeated transmits.
 * @return Status code indicating a success of the function call.
 *
 * Repeated transmits will occur after an application-initiated transmit caused
 * by calling one of the \ref Packet_TX APIs. The repetition will only occur
 * after the first application-initiated transmit after this function is
 * called. Future repeated transmits must be requested by calling this function
 * again.
 *
 * Each repeated transmit that occurs will have full \ref PTI information, and
 * will receive events such as \ref RAIL_EVENT_TX_PACKET_SENT as normal.
 *
 * If a TX error occurs during the repetition, the process will abort and the
 * TX error transition from \ref RAIL_SetTxTransitions() will be used. If the
 * repetition completes successfully, then the TX success transition from
 * \ref RAIL_SetTxTransitions() will be used.
 *
 * Use \ref RAIL_GetTxPacketsRemaining() if need to know how many transmit
 * completion events are expected before the repeating sequence is done, or
 * how many were not performed due to a transmit error.
 *
 * Any call to \ref RAIL_Idle(), \ref RAIL_StopTx(), or \ref
 * RAIL_SetTxTransitions() will clear the pending
 * repeated transmits. The state will also be cleared by another call to this
 * function. A DMP switch will clear this
 * state only if the initial transmit triggering the repeated transmits has
 * started.
 *
 * One can change the repeated transmit configuration by re-calling
 * this function with new parameters as long as that occurs prior to
 * calling a \ref Packet_TX API. Passing a \ref
 * RAIL_TxRepeatConfig_t::iterations count of 0 will prevent the next
 * transmit from repeating.
 *
 * The application is responsible for populating the transmit data to be used
 * by the repeated transmits via \ref RAIL_SetTxFifo() or \ref RAIL_WriteTxFifo().
 * Data will be transmitted from the transmit FIFO. If the transmit FIFO does
 * not have sufficient data to transmit, a TX error will be caused and a \ref
 * RAIL_EVENT_TX_UNDERFLOW will occur. In order to avoid an underflow, the
 * application should queue data to be transmitted as early as possible.
 * Consider using \ref RAIL_TX_OPTION_RESEND if the same packet data is to
 * be repeated: then the transmit FIFO only needs to be set/written once.
 *
 * Do not call this function after starting a transmit operation via a \ref
 * Packet_TX API call or
 * before processing the final transmit completion event of a prior transmit.
 * This function will fail to (re)configure the repetition if a transmit of any
 * kind is ongoing, including during the time between an initial transmit and
 * the end of a previously-configured repetition.
 *
 * @note Use the compile time symbol \ref RAIL_SUPPORTS_TX_TO_TX or the runtime
 *   call \ref RAIL_SupportsTxToTx() to check whether the platform supports
 *   this feature.
 */
RAIL_Status_t RAIL_SetNextTxRepeat(RAIL_Handle_t railHandle,
                                   const RAIL_TxRepeatConfig_t *repeatConfig);

/**
 * Get the number of transmits remaining in a repeat operation.
 * Must only be called from within event callback context when handling
 * one of the \ref RAIL_EVENTS_TX_COMPLETION events.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @return transmits remaining as described below.
 *
 * If the TX completion event is \ref RAIL_EVENT_TX_PACKET_SENT the
 * returned value indicates how many more such events are expected
 * before the repeat transmit operation is done. Due to interrupt
 * latency and timing, this may be an overcount if greater than 0
 * but is guaranteed to be accurate when 0.
 *
 * If the TX completion event is an error, the returned value indicates
 * the number of requested transmits that were not performed. For
 * \ref RAIL_EVENT_TX_ABORTED and \ref RAIL_EVENT_TX_UNDERFLOW the
 * count does not include the failing transmit itself. For the other
 * errors where a transmit never started or was blocked, the count
 * would include the failing transmit, which may be one higher than
 * the configured \ref RAIL_TxRepeatConfig_t::iterations if it was
 * the original transmit that was blocked.
 *
 * If an infinite repeat was configured, this will return \ref
 * RAIL_TX_REPEAT_INFINITE_ITERATIONS.
 */
uint16_t RAIL_GetTxPacketsRemaining(RAIL_Handle_t railHandle);

/**
 * Configure RAIL automatic state transition timing.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in,out] timings A pointer to the timings used to configure the RAIL state
 *   machine. This structure is updated with the actual times that were
 *   set, if an input timing is invalid.
 * @return Status code indicating a success of the function call.
 *
 * The timings given are close to the actual transition time. However,
 * a still uncharacterized software overhead occurs. Also, timings are not
 * always adhered to when using an automatic transition after an error, due to
 * the cleanup required to recover from the error.
 */
RAIL_Status_t RAIL_SetStateTiming(RAIL_Handle_t railHandle,
                                  RAIL_StateTiming_t *timings);

/**
 * Place the radio into an idle state.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in] mode The method for shutting down the radio.
 * @param[in] wait Whether this function should wait for the radio to reach
 *   idle before returning.
 * @return \ref RAIL_STATUS_NO_ERROR if the radio has idled by the time this
 *   function returns, or \ref RAIL_STATUS_SUSPENDED if it is still in the
 *   process of idling.
 *
 * This function is used to remove the radio from TX and RX states. How these
 * states are left is defined by the mode parameter.
 *
 * In multiprotocol, this API will also cause the radio to be yielded so that
 * other tasks can be run. See \ref rail_radio_scheduler_yield for more details.
 */
RAIL_Status_t RAIL_Idle(RAIL_Handle_t railHandle,
                        RAIL_IdleMode_t mode,
                        bool wait);

/**
 * Get the current radio state.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @return An enumeration for the current radio state.
 *
 * Returns the state of the radio as a bitmask containing:
 * \ref RAIL_RF_STATE_IDLE, \ref RAIL_RF_STATE_RX, \ref RAIL_RF_STATE_TX,
 * and \ref RAIL_RF_STATE_ACTIVE. \ref RAIL_RF_STATE_IDLE, \ref
 * RAIL_RF_STATE_RX, and \ref RAIL_RF_STATE_TX bits are mutually exclusive.
 * The radio can transition through intermediate states,
 * which are not reported but are instead considered part of the state
 * most closely associated. For example, when the radio is warming up
 * or shutting down the transmitter or receiver, this function returns
 * \ref RAIL_RF_STATE_TX or \ref RAIL_RF_STATE_RX, respectively.
 * When transitioning directly from RX to TX or vice-versa, this function
 * returns the earlier state.
 *
 * @note For a more detailed radio state, see \ref RAIL_GetRadioStateDetail().
 */
RAIL_RadioState_t RAIL_GetRadioState(RAIL_Handle_t railHandle);

/**
 * Get the detailed current radio state.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @return An enumeration for the current detailed radio state.
 *
 * Returns the state of the radio as a bitmask. The three core radio states
 * IDLE, RX, and TX are represented by mutually exclusive bits \ref
 * RAIL_RF_STATE_DETAIL_IDLE_STATE, \ref RAIL_RF_STATE_DETAIL_RX_STATE, and
 * \ref RAIL_RF_STATE_DETAIL_TX_STATE respectively. If the radio is
 * transitioning between these three states, the returned bitmask will have
 * \ref RAIL_RF_STATE_DETAIL_TRANSITION set along with a bit corresponding to
 * the destination core radio state. If, while in the receive state, the radio
 * is actively receiving a packet, \ref RAIL_RF_STATE_DETAIL_ACTIVE will be set;
 * otherwise, this bit will be clear. If frame detection is disabled, \ref
 * RAIL_RF_STATE_DETAIL_NO_FRAMES in the returned state bitmask will be set;
 * otherwise, this bit will be clear. If the radio is performing an LBT/CSMA
 * operation (e.g., a backoff period) \ref RAIL_RF_STATE_DETAIL_LBT in the
 * returned state bitmask will be set; otherwise, this bit will be clear.
 *
 * For the most part, the more detailed radio states returned by this API
 * correspond to radio states returned by \ref RAIL_GetRadioState() as follows:
 *
 *   \ref RAIL_RadioStateDetail_t        \ref RAIL_RadioState_t
 *   RAIL_RF_STATE_DETAIL_INACTIVE       RAIL_RF_STATE_INACTIVE
 *   RAIL_RF_STATE_DETAIL_IDLE_STATE
 *   | RAIL_STATE_DETAIL_TRANSITION      If RX overflow or leaving RX unforced:
 *                                         RAIL_RF_STATE_RX
 *                                       Else if leaving TX unforced:
 *                                         RAIL_RF_STATE_TX
 *                                       Else:
 *                                         RAIL_RF_STATE_IDLE
 *   RAIL_RF_STATE_DETAIL_IDLE_STATE     RAIL_RF_STATE_IDLE
 *   RAIL_RF_STATE_DETAIL_IDLE_STATE
 *   | RAIL_STATE_DETAIL_LBT             RAIL_RF_STATE_TX
 *   RAIL_RF_STATE_DETAIL_RX_STATE
 *   | RAIL_STATE_DETAIL_TRANSITION      If leaving TX:
 *                                         RAIL_RF_STATE_TX
 *                                       Else:
 *                                         RAIL_RF_STATE_RX
 *   RAIL_RF_STATE_DETAIL_RX_STATE
 *   | RAIL_RF_STATE_DETAIL_TRANSITION
 *   | RAIL_RF_STATE_DETAIL_NO_FRAMES    If leaving TX:
 *                                         RAIL_RF_STATE_TX
 *                                       Else:
 *                                         RAIL_RF_STATE_RX
 *   RAIL_RF_STATE_DETAIL_RX_STATE       RAIL_RF_STATE_RX
 *   RAIL_RF_STATE_DETAIL_RX_STATE
 *   | RAIL_RF_STATE_DETAIL_NO_FRAMES    RAIL_RF_STATE_RX
 *   RAIL_RF_STATE_DETAIL_RX_STATE
 *   | RAIL_RF_STATE_DETAIL_LBT          RAIL_RF_STATE_RX
 *   RAIL_RF_STATE_DETAIL_RX_STATE
 *   | RAIL_RF_STATE_DETAIL_NO_FRAMES
 *   | RAIL_RF_STATE_DETAIL_LBT          RAIL_RF_STATE_RX
 *   RAIL_RF_STATE_DETAIL_RX_STATE
 *   | RAIL_RF_STATE_DETAIL_ACTIVE       RAIL_RF_STATE_RX_ACTIVE
 *   RAIL_RF_STATE_DETAIL_TX_STATE
 *   | RAIL_RF_STATE_TRANSITION          If leaving RX:
 *                                         RAIL_RF_STATE_RX
 *                                       Else:
 *                                         RAIL_RF_STATE_TX
 *   RAIL_RF_STATE_DETAIL_TX_STATE
 *   | RAIL_RF_STATE_ACTIVE              RAIL_RF_STATE_TX_ACTIVE
 */
RAIL_RadioStateDetail_t RAIL_GetRadioStateDetail(RAIL_Handle_t railHandle);

/**
 * Enable/disable caching of synth calibration value.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in] enable A boolean to enable or disable caching of synth calibration.
 * @return Status code indicating success of the function call.
 *
 * Once enabled, the sequencer will start caching synth calibration values for
 * channels and apply them instead of performing calibration on every state
 * transition and channel change.
 * This will increase the transition time for the first time calibration is
 * performed. Subsequent state transitions will be faster. The cache size is 2.
 * \ref RAIL_IEEE802154_SUPPORTS_RX_CHANNEL_SWITCHING internally uses this feature
 * and there is no need to enable/disable it. This function returns
 * \ref RAIL_STATUS_INVALID_STATE if we try to disable it while
 * \ref RAIL_IEEE802154_SUPPORTS_RX_CHANNEL_SWITCHING is enabled.
 *
 * @note This function will improve the minimum timings that can be achieved in
 *   \ref RAIL_StateTiming_t::idleToRx, \ref RAIL_StateTiming_t::idleToTx,
 *   \ref RAIL_StateTiming_t::rxToTx, \ref RAIL_StateTiming_t::txToRx and
 *   \ref RAIL_StateTiming_t::txToTx. A call to \ref RAIL_SetStateTiming()
 *   is needed to achieve lower transition times.
 *
 * @note On a protocol switch the cache is cleared, so it is not suitable for
 *   applications where a protocol switch happens frequently, like with
 *   Dynamic Multiprotocol.
 */
RAIL_Status_t RAIL_EnableCacheSynthCal(RAIL_Handle_t railHandle, bool enable);

/** @} */ // end of group State_Transitions

/******************************************************************************
 * Transmit
 *****************************************************************************/
/**
 * @addtogroup Transmit
 * @brief APIs related to transmitting data packets
 * @{
 */

/// @addtogroup PA Power Amplifier (PA)
/// @brief APIs for interacting with one of the on chip PAs.
///
/// These APIs let you configure the on-chip PA to get the appropriate output
/// power.
///
/// These are the function types:
///   1) Configuration functions: These functions set and get configuration
///      for the PA. In this case, "configuration" refers to a) indicating
///      which PA to use, b) the voltage supplied by your board to the PA,
///      and c) the ramp time over which to ramp the PA up to its full
///      power.
///   2) Power-setting functions: These functions consume the actual
///      values written to the PA registers and write them appropriately.
///      These values are referred to as "(raw) power levels". The range of
///      acceptable values for these functions depends on which PA is
///      currently active. The higher the power level set, the higher
///      the dBm power output by the radio. However, the mapping
///      between dBm and these power levels can vary greatly between
///      modules/boards.
///   3) Conversion functions: These functions convert
///      between the "power levels" discussed previously and the
///      dBm values output by the radio. Continue reading for more information
///      about unit conversion.
///
/// The accuracy of the radio output power is application-specific.
/// For some protocols or channels, the protocol itself or
/// legal limitations require applications to know exactly what power
/// they're transmitting at, in dBm. Other applications do not have
/// these restrictions, and users determine power level(s)
/// that fit their criteria for the trade-off between radio range and
/// power savings, regardless of what dBm power that maps to.
///
/// \ref RAIL_ConvertRawToDbm() and \ref RAIL_ConvertDbmToRaw(),
/// which convert between the dBm power and the raw power levels,
/// provide a solution that fits all these applications.
/// The levels of customization are outlined below:
///  1) No customization needed: for a given dBm value, the result
///     of \ref RAIL_ConvertDbmToRaw() provides an appropriate
///     raw power level that, when written to the registers via
///     \ref RAIL_SetTxPower(), causes the radio to output at that
///     dBm power. In this case, no action is needed by the user,
///     the WEAK versions of the conversion functions can be used
///     and the default include paths in pa_conversions_efr32.h can
///     be used.
///  2) The mapping of power level to dBm is not ideal, but the
///     level of precision is sufficient: In pa_conversions_efr32.c,
///     the WEAK versions of the conversion functions work by using
///     8-segment piecewise linear curves to convert between dBm
///     and power levels for PA's with hundreds of power levels
///     and simple mapping tables for use with PA's with only a few
///     levels. If this method is sufficiently precise, but the mapping
///     between power levels and dBm is incorrect,
///     copy pa_curves_efr32.h into a new file, updating the segments
///     to form a better fit (_DCDC_CURVES or _VBAT_CURVES defines) and
///     then add the RAIL_PA_CURVES define to your build with the path
///     to the new file.
///  3) A different level of precision is needed and the fit is bad:
///     If the piecewise-linear line segment fit is not appropriate for
///     your solution, the functions in pa_conversions_efr32.c can be
///     totally rewritten, as long as \ref RAIL_ConvertDbmToRaw() and
///     \ref RAIL_ConvertRawToDbm() have the same signatures. It is completely
///     acceptable to re-write these in a way that makes the
///     pa_curves_efr32.h and pa_curve_types_efr32.h files referenced in
///     pa_conversions_efr32.h unnecessary. Those files are needed solely
///     for the provided conversion methods.
///  4) dBm values are not necessary: If the application does not require
///     dBm values at all, overwrite \ref
///     RAIL_ConvertDbmToRaw() and \ref RAIL_ConvertRawToDbm() with smaller functions
///     (i.e., return 0 or whatever was input). These functions are called
///     from within the RAIL library, so they can never be deadstripped,
///     but making them as small as possible is the best way to reduce code
///     size. From there, call \ref RAIL_SetTxPower(), without
///     converting from a dBm value. To stop the library from coercing the
///     power based on channels, overwrite \ref RAIL_ConvertRawToDbm()
///     to always return 0 and overwrite \ref RAIL_ConvertDbmToRaw() to
///     always return 255.
///
/// The following is example code that shows how to initialize your PA
/// @code{.c}
/// #include "pa_conversions_efr32.h"
///
/// // A macro RAIL_TX_POWER_CURVES_CONFIG is used as the curve
/// // structures used by the provided conversion functions.
/// RAIL_TxPowerCurvesConfigAlt_t tx_power_curves_config = RAIL_TX_POWER_CURVES_CONFIG;
/// // Saves those curves
/// // to be referenced when the conversion functions are called.
/// RAIL_InitTxPowerCurves(rail_handle, &tx_power_curves_config);
///
/// // Declares the structure used to configure the PA.
/// RAIL_TxPowerConfig_t txPowerConfig = {
///   .mode     = RAIL_TX_POWER_MODE_2P4_HP,
///   .voltage  = 3300,
///   .rampTime = 10,
/// };
///
/// // Initializes the PA. Here, it is assumed that 'railHandle' is a valid RAIL_Handle_t
/// // that has already been initialized.
/// RAIL_ConfigTxPower(railHandle, &txPowerConfig);
///
/// // Picks a dBm power to use: 100 deci-dBm = 10 dBm. See docs on RAIL_TxPower_t.
/// RAIL_TxPower_t power = 100;
///
/// // Gets the config written by RAIL_ConfigTxPower() to confirm what was actually set.
/// RAIL_GetTxPowerConfig(railHandle, &txPowerConfig);
///
/// // RAIL_ConvertDbmToRaw() is the default weak version,
/// // or the customer version, if overwritten.
/// RAIL_TxPowerLevel_t powerLevel
///   = RAIL_ConvertDbmToRaw(railHandle, txPowerConfig.mode, power);
///
/// // Writes the result of the conversion to the PA power registers in terms
/// // of raw power levels.
/// RAIL_SetTxPower(railHandle, powerLevel);
/// @endcode
///
/// @note All lines following "RAIL_TxPower_t power = 100;" can be
///   replaced with the provided utility function, \ref RAIL_SetTxPowerDbm().
///   However, the full example here was provided for clarity. See the
///   documentation on \ref RAIL_SetTxPowerDbm() for more details.
///
/// @{

/**
 * Initialize TX power settings.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in] config A pointer to a power config with the desired initial settings
 *   for the TX amplifier.
 * @return Status code indicating success of the function call.
 *
 * These settings include the selection between the multiple TX amplifiers,
 * voltage supplied to the TX power amplifier, and ramp times. This must
 * be called before any transmit occurs or \ref RAIL_SetTxPower() is called.
 * While this function should always be called during initialization,
 * it can also be called any time if these settings need to change to adapt
 * to a different application/protocol. This API also resets TX power to
 * \ref RAIL_TX_POWER_LEVEL_INVALID, so \ref RAIL_SetTxPower() must be called
 * afterwards.
 *
 * At times, certain combinations of configurations cannot be achieved.
 * This API attempts to get as close as possible to the requested settings. The
 * following "RAIL_GetTxPower..." API can be used to determine what values were set. A
 * change in \ref RAIL_TxPowerConfig_t::rampTime may affect the minimum timings
 * that can be achieved in \ref RAIL_StateTiming_t::idleToTx and
 * \ref RAIL_StateTiming_t::rxToTx. Call \ref RAIL_SetStateTiming() again to
 * check whether these times have changed.
 */
RAIL_Status_t RAIL_ConfigTxPower(RAIL_Handle_t railHandle,
                                 const RAIL_TxPowerConfig_t *config);

/**
 * Get the TX power settings currently used in the amplifier.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[out] config A non-NULL pointer to a \ref
 *   RAIL_TxPowerConfig_t structure filled in by the function.
 * @return Status code indicating success of the function call.
 *
 * Note that this API does not return the current TX power, which is separately
 * managed by the \ref RAIL_GetTxPower() / \ref RAIL_SetTxPower() APIs. Use this API
 * to determine which values were set as a result of
 * \ref RAIL_ConfigTxPower().
 */
RAIL_Status_t RAIL_GetTxPowerConfig(RAIL_Handle_t railHandle,
                                    RAIL_TxPowerConfig_t *config);

/**
 * Set the TX power in units of raw units (see \ref rail_chip_specific.h for
 * value ranges).
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in] powerLevel Power in radio-specific \ref RAIL_TxPowerLevel_t units.
 * @return Status code indicating success of the function call.
 *
 * To convert between decibels and the integer values that the
 * registers take, call \ref RAIL_ConvertDbmToRaw().
 * A weak version of this function, which works well with our boards is provided. However,
 * customers using a custom board need to characterize
 * radio operation on that board and override the function to convert
 * appropriately from the desired dB values to raw integer values.
 *
 * Depending on the configuration used in \ref RAIL_ConfigTxPower(), not all
 * power levels are achievable. This API will get as close as possible to
 * the desired power without exceeding it, and calling \ref RAIL_GetTxPower() is
 * the only way to know the exact value written.
 *
 * Calling this function before configuring the PA (i.e., before a successful
 * call to \ref RAIL_ConfigTxPower()) will return an error.
 */
RAIL_Status_t RAIL_SetTxPower(RAIL_Handle_t railHandle,
                              RAIL_TxPowerLevel_t powerLevel);

/**
 * Return the current power setting of the PA.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @return The radio-specific \ref RAIL_TxPowerLevel_t value of the current
 *   transmit power.
 *
 * This API returns the raw value that was set by \ref RAIL_SetTxPower().
 * A weak version of \ref RAIL_ConvertRawToDbm() that works
 * with Silicon Labs boards to convert the raw values into actual output dBm values is provided.
 * However, customers using a custom board need to
 * re-characterize the relationship between raw and decibel values and rewrite
 * the provided function.
 *
 * Calling this function before configuring the PA (i.e., before a successful
 * call to \ref RAIL_ConfigTxPower()) will return error \ref
 * RAIL_TX_POWER_LEVEL_INVALID.
 */
RAIL_TxPowerLevel_t RAIL_GetTxPower(RAIL_Handle_t railHandle);

/**
 * Convert raw values written to registers to decibel value (in units of
 * deci-dBm).
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in] mode PA mode for which to convert.
 * @param[in] powerLevel A raw amplifier register value to be converted to
 *   deci-dBm.
 * @return raw amplifier values converted to units of deci-dBm.
 *
 * A weak version of this function is provided that is tuned
 * to provide accurate values for our boards. For a
 * custom board, the relationship between what is written to the TX amplifier
 * and the actual output power should be re-characterized and implemented in an
 * overriding version of \ref RAIL_ConvertRawToDbm(). For minimum code size and
 * best speed, use only raw values with the \ref RAIL_SetTxPower() API and override this
 * function with a smaller function. In the weak version provided with the RAIL
 * library, railHandle is only used to indicate to the user from where the
 * function was called, so it is okay to use either a real protocol handle, or one
 * of the radio-generic ones, such as \ref RAIL_EFR32_HANDLE.
 *
 * Although the implementation of this function may change, the signature
 * must be as declared here.
 */
RAIL_TxPower_t RAIL_ConvertRawToDbm(RAIL_Handle_t railHandle,
                                    RAIL_TxPowerMode_t mode,
                                    RAIL_TxPowerLevel_t powerLevel);

/**
 * Convert the desired decibel value (in units of deci-dBm)
 * to raw integer values used by the TX amplifier registers.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in] mode PA mode for which to do the conversion.
 * @param[in] power Desired dBm value in units of deci-dBm.
 * @return deci-dBm value converted to a raw
 *   integer value that can be used directly with \ref RAIL_SetTxPower().
 *
 * A weak version of this function is provided that is tuned
 * to provide accurate values for our boards. For a
 * custom board, the relationship between what is written to the TX amplifier
 * and the actual output power should be characterized and implemented in an
 * overriding version of \ref RAIL_ConvertDbmToRaw(). For minimum code size and
 * best speed use only raw values with the \ref RAIL_SetTxPower() API and override this
 * function with a smaller function. In the weak version provided with the RAIL
 * library, railHandle is only used to indicate to the user from where the
 * function was called, so it is okay to use either a real protocol handle, or one
 * of the radio-generic ones, such as \ref RAIL_EFR32_HANDLE.
 *
 * Although the implementation of this function may change, the signature
 * must be as declared here.
 */
RAIL_TxPowerLevel_t RAIL_ConvertDbmToRaw(RAIL_Handle_t railHandle,
                                         RAIL_TxPowerMode_t mode,
                                         RAIL_TxPower_t power);

/**
 * Converts the desired decibel value (in units of deci-dBm)
 * to a \ref RAIL_TxPowerSettingEntry_t.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in] mode PA mode for which the conversion is to be done.
 * @param[in] power Desired dBm value in units of deci-dBm.
 * @param[out] pPowerSettingInfo A non-NULL pointer to the
 *   \ref RAIL_TxPowerSettingEntry_t structure to be filled in with the
 *   converted value.
 * @return Status code indicating success of function call.
 *
 * A weak version of this function is provided that is tuned
 * to provide accurate values for our boards. For a
 * custom board, the relationship between what is written to the TX amplifier
 * and the actual output power should be characterized and implemented in an
 * overriding version of \ref RAIL_ConvertDbmToPowerSettingEntry().
 * In the weak version provided with the RAIL
 * library, railHandle is only used to indicate to the user from where the
 * function was called, so it is okay to use either a real protocol handle, or one
 * of the radio-generic ones, such as \ref RAIL_EFR32_HANDLE.
 *
 * Although the implementation of this function may change, the signature
 * must be as declared here.
 */
RAIL_Status_t RAIL_ConvertDbmToPowerSettingEntry(RAIL_Handle_t railHandle,
                                                 RAIL_TxPowerMode_t mode,
                                                 RAIL_TxPower_t power,
                                                 RAIL_TxPowerSettingEntry_t *pPowerSettingInfo);

struct RAIL_TxPowerCurvesConfigAlt;
/// Verify the TX Power Curves on modules.
///
/// @param[in] config A pointer to TX Power Curves to use on this module.
/// @return Status code indicating success of function call.
///
/// This function only needs to be called when using a module and has no
/// effect otherwise. Transmit will not work before this function is called.
RAIL_Status_t RAIL_VerifyTxPowerCurves(const struct RAIL_TxPowerCurvesConfigAlt *config);

/// Set the TX power in terms of deci-dBm instead of raw power level.
///
/// @param[in] railHandle A RAIL instance handle.
/// @param[in] power A desired deci-dBm power to be set.
/// @return Status code indicating success of the function call.
///
/// This is a utility function for user convenience. Normally, to set TX
/// power in dBm, do the following:
/// @code{.c}
/// RAIL_TxPower_t power = 100; // 100 deci-dBm, 10 dBm
/// RAIL_TxPowerConfig_t txPowerConfig;
/// RAIL_GetTxPowerConfig(railHandle, &txPowerConfig);
/// // RAIL_ConvertDbmToRaw() will be the weak version provided by Silicon Labs
/// // by default, or the customer version, if overwritten.
/// RAIL_TxPowerLevel_t powerLevel
///   = RAIL_ConvertDbmToRaw(railHandle, txPowerConfig.mode, power);
/// RAIL_SetTxPower(railHandle, powerLevel);
/// @endcode
///
/// This function wraps all those calls in a single function with power passed in
/// as a parameter.
///
RAIL_Status_t RAIL_SetTxPowerDbm(RAIL_Handle_t railHandle,
                                 RAIL_TxPower_t power);

/// Get the TX power in terms of deci-dBm instead of raw power level.
///
/// @param[in] railHandle A RAIL instance handle.
/// @return The current output power in deci-dBm.
///
/// This is a utility function for user convenience. Normally, to get TX
/// power in dBm, do the following:
/// @code{.c}
/// RAIL_TxPowerLevel_t powerLevel = RAIL_GetTxPower(railHandle);
/// RAIL_TxPowerConfig_t txPowerConfig;
/// RAIL_GetTxPowerConfig(railHandle, &txPowerConfig);
/// // RAIL_ConvertRawToDbm() will be the weak version provided by Silicon Labs
/// // by default, or the customer version, if overwritten.
/// RAIL_TxPower_t power
///   = RAIL_ConvertRawToDbm(railHandle, txPowerConfig.mode, powerLevel);
/// return power;
/// @endcode
///
/// This function wraps all those calls in a single function with power returned
/// as the result.
///
RAIL_TxPower_t RAIL_GetTxPowerDbm(RAIL_Handle_t railHandle);

/**
 * Get the TX PA power setting table and related values.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in] mode PA mode for which to get the powersetting table.
 * @param[out] minPower A pointer to a \ref RAIL_TxPower_t.
 * @param[out] maxPower A pointer to a \ref RAIL_TxPower_t.
 * @param[out] step A pointer to a \ref RAIL_TxPowerLevel_t, but in deci-dBm units.
 * @return Power setting table start address. When NULL is returned all out params
 *   above won't be set.
 *
 * The number of entries in the table can be calculated based on output
 * minPower, maxPower, and step parameters.
 * For example, for minPower = 115 (11.5 dBm), maxPower = 300 (30 dBm),
 * and step = 1 (0.1 dBm), the number of entries in table would be 186.
 */
const RAIL_PaPowerSetting_t *RAIL_GetPowerSettingTable(RAIL_Handle_t railHandle, RAIL_TxPowerMode_t mode,
                                                       RAIL_TxPower_t *minPower, RAIL_TxPower_t *maxPower,
                                                       RAIL_TxPowerLevel_t *step);

/**
 * Set the TX PA power setting used to configure the PA hardware for the PA output
 * power determined by \ref RAIL_SetTxPowerDbm().
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in] paPowerSetting The desired PA power setting.
 * @param[in] minPowerDbm The minimum power in dBm that the PA can output.
 * @param[in] maxPowerDbm The maximum power in dBm that the PA can output.
 * @param[in] currentPowerDbm The corresponding output power in dBm for this power setting.
 * @return Status code indicating success of the function call.
 */
RAIL_Status_t RAIL_SetPaPowerSetting(RAIL_Handle_t railHandle,
                                     RAIL_PaPowerSetting_t paPowerSetting,
                                     RAIL_TxPower_t minPowerDbm,
                                     RAIL_TxPower_t maxPowerDbm,
                                     RAIL_TxPower_t currentPowerDbm);

/**
 * Get the TX PA power setting, which is used to configure power configurations
 * when the dBm to paPowerSetting mapping table mode is used.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @return The current PA power setting.
 */
RAIL_PaPowerSetting_t RAIL_GetPaPowerSetting(RAIL_Handle_t railHandle);

/**
 * Enable automatic switching between PAs internally to the RAIL library.
 *
 * @param[in] railHandle A real RAIL instance handle.
 * @param[in] enable Enable or disable PA Auto Mode.
 * @return Status code indicating success of the function call.
 *
 * While PA Automode is enabled, the PA will be chosen and set automatically whenever
 * \ref RAIL_SetTxPowerDbm() is called or whenever powers are coerced automatically,
 * internally to the RAIL library during a channel change. While PA Auto Mode
 * is enabled, users cannot call \ref RAIL_ConfigTxPower() or
 * \ref RAIL_SetTxPower(). When entering auto mode, \ref RAIL_SetTxPowerDbm() must
 * be called to specify the desired power. When leaving auto mode,
 * \ref RAIL_ConfigTxPower() as well as one of \ref RAIL_SetTxPower() or
 * \ref RAIL_SetTxPowerDbm() must be called to re-specify the desired PA and power
 * level combination.
 *
 * @note: Power conversion curves must be initialized before calling this function.
 *   That is, \ref RAIL_ConvertDbmToRaw() and \ref RAIL_ConvertRawToDbm() most both be
 *   able to operate properly to ensure that PA Auto Mode functions correctly.
 *   See the PA Conversions plugin or AN1127 for more details.
 */
RAIL_Status_t RAIL_EnablePaAutoMode(RAIL_Handle_t railHandle, bool enable);

/**
 * Query status of PA Auto Mode.
 *
 * @param[in] railHandle A real RAIL instance handle.
 * @return Indicator of whether Auto Mode is enabled (true) or not (false).
 */
bool RAIL_IsPaAutoModeEnabled(RAIL_Handle_t railHandle);

/**
 * Callback that decides which PA and power level should be
 * used while in PA auto mode.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in,out] power A pointer to the dBm output power (in deci-dBm, 10*dBm)
 *   being requested. The value this points to when the function returns
 *   will be applied to the radio.
 * @param[out] mode A pointer to the \ref RAIL_TxPowerMode_t to be used to
 *   achieve the requested power. The value this points to when the function
 *   returns will be applied to the radio.
 * @param[in] chCfgEntry A pointer to a \ref RAIL_ChannelConfigEntry_t.
 *   While switching channels, it will be the entry RAIL is switch *to*,
 *   during a call to \ref RAIL_SetTxPowerDbm(), it will be the entry
 *   RAIL is *already on*. Can be NULL if a channel configuration
 *   was not set or no valid channels are present.
 * @return Status code indicating success of the function call. If this
 *   is anything except \ref RAIL_STATUS_NO_ERROR, neither PA's nor their
 *   powers will be configured automatically.
 *
 * Whatever values mode and powerLevel point to when this function return
 * will be applied to the PA hardware and used for transmits.
 *
 * @note The mode and power level provided by this function depends on the
 *   \ref RAIL_PaAutoModeConfig provided for the radio. The \ref RAIL_PaAutoModeConfig
 *   definition for a radio should tend to cover all the bands supported by the radio
 *   and cover the full range of power in each to find a valid entry for requested power
 *   for a specific band.
 */
RAIL_Status_t RAILCb_PaAutoModeDecision(RAIL_Handle_t railHandle,
                                        RAIL_TxPower_t *power,
                                        RAIL_TxPowerMode_t *mode,
                                        const RAIL_ChannelConfigEntry_t *chCfgEntry);

/** @} */ // end of group PA

/// @addtogroup Packet_TX Packet Transmit
/// @brief APIs which initiate a packet transmission in RAIL.
///
/// When using any of these functions, the data to be transmitted must have been
/// previously written to the transmit FIFO via \ref RAIL_SetTxFifo() and/or
/// \ref RAIL_WriteTxFifo().
///
/// @{

/**
 * Start a transmit.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in] channel Define the channel to transmit on.
 * @param[in] options TX options to be applied to this transmit only.
 * @param[in] schedulerInfo A pointer to information to allow the radio scheduler to place
 *   this transmit appropriately. This is only used in multiprotocol version of
 *   RAIL and may be set to NULL in all other versions.
 * @return Status code indicating success of the function call. If successfully
 *   initiated, transmit completion or failure will be reported by a later
 *   \ref RAIL_Config_t::eventsCallback with the appropriate \ref RAIL_Events_t.
 *
 * The transmit process will begin immediately or as soon as a packet being
 * received has finished. The data to be transmitted must have been previously
 * established via \ref RAIL_SetTxFifo() and/or \ref RAIL_WriteTxFifo().
 *
 * Returns an error if a previous transmit is still in progress.
 * If changing channels, any ongoing packet reception is aborted.
 *
 * In multiprotocol, ensure that the radio is properly yielded after this
 * operation completes. See \ref rail_radio_scheduler_yield for more details.
 */
RAIL_Status_t RAIL_StartTx(RAIL_Handle_t railHandle,
                           uint16_t channel,
                           RAIL_TxOptions_t options,
                           const RAIL_SchedulerInfo_t *schedulerInfo);

/**
 * Schedule sending a packet.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in] channel The channel to transmit on.
 * @param[in] options TX options to be applied to this transmit only.
 * @param[in] config A pointer to the \ref RAIL_ScheduleTxConfig_t
 *   structure indicating when and how the transmit should occur.
 * @param[in] schedulerInfo A pointer to information to allow the radio scheduler to place
 *   this transmit appropriately. This is only used in multiprotocol version of
 *   RAIL and may be set to NULL in all other versions.
 * @return Status code indicating success of the function call. If successfully
 *   initiated, a transmit completion or failure will be reported by a later
 *   \ref RAIL_Config_t::eventsCallback with the appropriate \ref RAIL_Events_t.
 *
 * The transmit process will begin at the scheduled time. The data to be
 * transmitted must have been previously established via \ref RAIL_SetTxFifo()
 * and/or \ref RAIL_WriteTxFifo().
 * The time (in microseconds) and whether that time is absolute or
 * relative is specified using the \ref RAIL_ScheduleTxConfig_t structure.
 * What to do if a scheduled transmit fires in
 * the middle of receiving a packet is also specified in this structure.
 *
 * Returns an error if a previous transmit is still in progress.
 * If changing channels, the channel is changed immediately and
 * will abort any ongoing packet reception.
 *
 * In multiprotocol, ensure that the radio is properly yielded after this
 * operation completes. See \ref rail_radio_scheduler_yield for more details.
 */
RAIL_Status_t RAIL_StartScheduledTx(RAIL_Handle_t railHandle,
                                    uint16_t channel,
                                    RAIL_TxOptions_t options,
                                    const RAIL_ScheduleTxConfig_t *config,
                                    const RAIL_SchedulerInfo_t *schedulerInfo);

/**
 * Start a transmit using CSMA.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in] channel The channel to transmit on.
 * @param[in] options TX options to be applied to this transmit only.
 * @param[in] csmaConfig A pointer to the RAIL_CsmaConfig_t structure
 *   describing the CSMA parameters to use for this transmit.
 *   \n In multiprotocol this must point to global or heap storage that remains
 *   valid after the API returns until the transmit is actually started.
 * @param[in] schedulerInfo A pointer to information to allow the radio scheduler to place
 *   this transmit appropriately. This is only used in multiprotocol version of
 *   RAIL and may be set to NULL in all other versions.
 * @return Status code indicating success of the function call. If successfully
 *   initiated, a transmit completion or failure will be reported by a later
 *   \ref RAIL_Config_t::eventsCallback with the appropriate \ref RAIL_Events_t.
 *
 * Perform the Carrier Sense Multiple Access (CSMA) algorithm, and if
 * the channel is deemed clear (RSSI below the specified threshold), it will
 * commence transmission. The data to be transmitted must have been previously
 * established via \ref RAIL_SetTxFifo() and/or \ref RAIL_WriteTxFifo().
 * Packets can be received during CSMA backoff periods if receive is active
 * throughout the CSMA process. This will happen either by starting the CSMA
 * process while receive is already active, or if the \ref
 * RAIL_CsmaConfig_t::ccaBackoff time is less than the RAIL_StateTiming_t::idleToRx
 * time. If the \ref RAIL_CsmaConfig_t::ccaBackoff time is greater than the
 * \ref RAIL_StateTiming_t::idleToRx time, receive will only be active during
 * CSMA's clear channel assessments.
 *
 * If the CSMA algorithm deems the channel busy, the \ref RAIL_Config_t::eventsCallback
 * occurs with \ref RAIL_EVENT_TX_CHANNEL_BUSY, and the contents
 * of the transmit FIFO remain intact.
 *
 * Returns an error if a previous transmit is still in progress.
 * If changing channels, the channel is changed immediately and any ongoing
 * packet reception is aborted.
 *
 * Returns an error if a scheduled RX is still in progress.
 *
 * In multiprotocol, ensure that the radio is properly yielded after this
 * operation completes. See \ref rail_radio_scheduler_yield for more details.
 */
RAIL_Status_t RAIL_StartCcaCsmaTx(RAIL_Handle_t railHandle,
                                  uint16_t channel,
                                  RAIL_TxOptions_t options,
                                  const RAIL_CsmaConfig_t *csmaConfig,
                                  const RAIL_SchedulerInfo_t *schedulerInfo);

/**
 * Start a transmit using LBT.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in] channel The channel to transmit on.
 * @param[in] options TX options to be applied to this transmit only.
 * @param[in] lbtConfig A pointer to the \ref RAIL_LbtConfig_t structure
 *   describing the LBT parameters to use for this transmit.
 *   \n In multiprotocol this must point to global or heap storage that remains
 *   valid after the API returns until the transmit is actually started.
 * @param[in] schedulerInfo A pointer to information to allow the radio scheduler to place
 *   this transmit appropriately. This is only used in multiprotocol version of
 *   RAIL and may be set to NULL in all other versions.
 * @return Status code indicating success of the function call. If successfully
 *   initiated, a transmit completion or failure will be reported by a later
 *   \ref RAIL_Config_t::eventsCallback with the appropriate \ref RAIL_Events_t.
 *
 * Performs the Listen Before Talk (LBT) algorithm, and if the channel
 * is deemed clear (RSSI below the specified threshold), it will commence
 * transmission. The data to be transmitted must have been previously established
 * via \ref RAIL_SetTxFifo() and/or \ref RAIL_WriteTxFifo().
 * Packets can be received during LBT backoff periods if receive is active
 * throughout the LBT process. This will happen either by starting the LBT
 * process while receive is already active, or if the \ref
 * RAIL_LbtConfig_t::lbtBackoff time is less than the \ref RAIL_StateTiming_t::idleToRx
 * time. If the \ref RAIL_LbtConfig_t::lbtBackoff time is greater than the
 * \ref RAIL_StateTiming_t::idleToRx time, receive will only be active during
 * LBT's clear channel assessments.
 *
 * If the LBT algorithm deems the channel busy, the \ref RAIL_Config_t::eventsCallback occurs with
 * \ref RAIL_EVENT_TX_CHANNEL_BUSY, and the contents
 * of the transmit FIFO remain intact.
 *
 * Returns an error if a previous transmit is still in progress.
 * If changing channels, the channel is changed immediately and any ongoing
 * packet reception is aborted.
 *
 * Returns an error if a scheduled RX is still in progress.
 *
 * In multiprotocol, ensure that the radio is properly yielded after this
 * operation completes. See \ref rail_radio_scheduler_yield for more details.
 */
RAIL_Status_t RAIL_StartCcaLbtTx(RAIL_Handle_t railHandle,
                                 uint16_t channel,
                                 RAIL_TxOptions_t options,
                                 const RAIL_LbtConfig_t *lbtConfig,
                                 const RAIL_SchedulerInfo_t *schedulerInfo);

/**
 * Schedule a transmit using CSMA.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in] channel The channel to transmit on.
 * @param[in] options TX options to be applied to this transmit only.
 * @param[in] scheduleTxConfig A pointer to the \ref RAIL_ScheduleTxConfig_t
 *   structure describing the CSMA parameters to use for this transmit.
 * @param[in] csmaConfig A pointer to the \ref RAIL_CsmaConfig_t structure
 *   describing the CSMA parameters to use for this transmit.
 *   \n In multiprotocol this must point to global or heap storage that remains
 *   valid after the API returns until the transmit is actually started.
 * @param[in] schedulerInfo A pointer to information to allow the radio scheduler to place
 *   this transmit appropriately. This is only used in multiprotocol version of
 *   RAIL and may be set to NULL in all other versions.
 * @return Status code indicating success of the function call. If successfully
 *   initiated, a transmit completion or failure will be reported by a later
 *   \ref RAIL_Config_t::eventsCallback with the appropriate \ref RAIL_Events_t.
 *
 * Internally, the RAIL library needs a PRS channel for this feature.
 * It will allocate an available PRS channel to use and hold onto that
 * channel for future use. If no PRS channel is available, the function
 * returns with \ref RAIL_STATUS_INVALID_CALL.
 *
 * This is a scheduled variation of \ref RAIL_StartCcaCsmaTx(); refer to
 * that function for CSMA details.
 *
 * Returns an error if a previous transmit is still in progress.
 * If changing channels, the channel is changed immediately and any ongoing
 * packet reception is aborted.
 *
 * Returns an error if a scheduled RX is still in progress.
 *
 * In multiprotocol, ensure that the radio is properly yielded after this
 * operation completes. See \ref rail_radio_scheduler_yield for more details.
 */
RAIL_Status_t RAIL_StartScheduledCcaCsmaTx(RAIL_Handle_t railHandle,
                                           uint16_t channel,
                                           RAIL_TxOptions_t options,
                                           const RAIL_ScheduleTxConfig_t *scheduleTxConfig,
                                           const RAIL_CsmaConfig_t *csmaConfig,
                                           const RAIL_SchedulerInfo_t *schedulerInfo);

/**
 * Schedule a transmit using LBT.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in] channel The channel to transmit on.
 * @param[in] options TX options to be applied to this transmit only.
 * @param[in] scheduleTxConfig A pointer to the \ref RAIL_ScheduleTxConfig_t
 *   structure describing the CSMA parameters to use for this transmit.
 * @param[in] lbtConfig A pointer to the \ref RAIL_LbtConfig_t structure
 *   describing the LBT parameters to use for this transmit.
 *   \n In multiprotocol this must point to global or heap storage that remains
 *   valid after the API returns until the transmit is actually started.
 * @param[in] schedulerInfo A pointer to information to allow the radio scheduler to place
 *   this transmit appropriately. This is only used in multiprotocol version of
 *   RAIL and may be set to NULL in all other versions.
 * @return Status code indicating success of the function call. If successfully
 *   initiated, a transmit completion or failure will be reported by a later
 *   \ref RAIL_Config_t::eventsCallback with the appropriate \ref RAIL_Events_t.
 *
 * Internally, the RAIL library needs a PRS channel for this feature.
 * It will allocate an available PRS channel to use and hold onto that
 * channel for future use. If no PRS channel is available, the function
 * returns with \ref RAIL_STATUS_INVALID_CALL.
 *
 * This is a scheduled variation of \ref RAIL_StartCcaLbtTx; refer to
 * that function for LBT details.
 *
 * Returns an error if a previous transmit is still in progress.
 * If changing channels, the channel is changed immediately and any ongoing
 * packet reception is aborted.
 *
 * Returns an error if a scheduled RX is still in progress.
 *
 * In multiprotocol, ensure that the radio is properly yielded after this
 * operation completes. See \ref rail_radio_scheduler_yield for more details.
 */
RAIL_Status_t RAIL_StartScheduledCcaLbtTx(RAIL_Handle_t railHandle,
                                          uint16_t channel,
                                          RAIL_TxOptions_t options,
                                          const RAIL_ScheduleTxConfig_t *scheduleTxConfig,
                                          const RAIL_LbtConfig_t *lbtConfig,
                                          const RAIL_SchedulerInfo_t *schedulerInfo);

/** @} */ // end of group Packet_TX

/**
 * Stop an active or pending transmit.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in] mode Specifies the type(s) of transmit to stop.
 * @return \ref RAIL_STATUS_NO_ERROR if the transmit was successfully
 *   stopped or \ref RAIL_STATUS_INVALID_STATE if there is no transmit
 *   operation to stop.
 *
 * @note When mode includes \ref RAIL_STOP_MODE_ACTIVE, this can also stop
 *   an active Auto-Ack transmit. When an active transmit is stopped, \ref
 *   RAIL_EVENT_TX_ABORTED or \ref RAIL_EVENT_TXACK_ABORTED should occur.
 *   When mode includes \ref RAIL_STOP_MODE_PENDING this can also stop
 *   a \ref RAIL_TX_OPTION_CCA_ONLY transmit operation. When a pending
 *   transmit is stopped, \ref RAIL_EVENT_TX_BLOCKED should occur.
 */
RAIL_Status_t RAIL_StopTx(RAIL_Handle_t railHandle, RAIL_StopMode_t mode);

/**
 * Set the CCA threshold in dBm.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in] ccaThresholdDbm The CCA threshold in dBm.
 * @return Status code indicating success of the function call.
 *
 * Unlike \ref RAIL_StartCcaCsmaTx() or \ref RAIL_StartCcaLbtTx(), which can cause a
 * transmit, this function only modifies the CCA threshold. A possible
 * use case for this function involves setting the CCA threshold to invalid RSSI
 * of -128 which blocks transmission by preventing clear channel assessments
 * from succeeding.
 */
RAIL_Status_t RAIL_SetCcaThreshold(RAIL_Handle_t railHandle,
                                   int8_t ccaThresholdDbm);

/**
 * Get detailed information about the last packet transmitted.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in,out] pPacketDetails An application-provided pointer to store
 *   RAIL_TxPacketDetails_t corresponding to the transmit event.
 *   The isAck and timeSent fields totalPacketBytes and timePosition
 *   must be initialized prior to each call:
 *   - isAck true to obtain details about the most recent Ack transmit,
 *     false to obtain details about the most recent app-initiated transmit.
 *   - totalPacketBytes with the total number of bytes of the transmitted
 *     packet for RAIL to use when calculating the specified timestamp.
 *     This should account for all bytes sent over the air after the
 *     Preamble and Sync word(s), including CRC bytes.
 *   - timePosition with a \ref RAIL_PacketTimePosition_t value specifying
 *     the packet position to put in the timeSent field on return.
 *     This field will also be updated with the actual position corresponding
 *     to the timeSent value filled in.
 * @return \ref RAIL_STATUS_NO_ERROR if pPacketDetails was filled in,
 *   or an appropriate error code otherwise.
 *
 * @note Consider using \ref RAIL_GetTxPacketDetailsAlt2 for smaller code size.
 *
 * This function can only be called from callback context for either
 * \ref RAIL_EVENT_TX_PACKET_SENT or \ref RAIL_EVENT_TXACK_PACKET_SENT
 * events.
 */
RAIL_Status_t RAIL_GetTxPacketDetails(RAIL_Handle_t railHandle,
                                      RAIL_TxPacketDetails_t *pPacketDetails);

/**
 * Get detailed information about the last packet transmitted.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in] isAck true to obtain details about the most recent Ack transmit.
 *   false to obtain details about the most recent app-initiated transmit.
 * @param[out] pPacketTime An application-provided non-NULL pointer to store a
 *   RAIL_Time_t corresponding to the transmit event. This will be populated
 *   with a timestamp corresponding to an arbitrary location in the packet. Call
 *   \ref RAIL_GetTxTimePreambleStart, \ref RAIL_GetTxTimeSyncWordEnd, or
 *   \ref RAIL_GetTxTimeFrameEnd to adjust the timestamp for different locations
 *   in the packet.
 * @return \ref RAIL_STATUS_NO_ERROR if pPacketTime was filled in,
 *   or an appropriate error code otherwise.
 *
 * @note Consider using \ref RAIL_GetTxPacketDetailsAlt2 to pass in
 *   a \ref RAIL_PacketTimeStamp_t structure instead of a \ref RAIL_Time_t
 *   structure, particularly when \ref RAIL_PacketTimePosition_t information
 *   is needed or useful.
 *
 * This function can only be called from callback context for either
 * \ref RAIL_EVENT_TX_PACKET_SENT or \ref RAIL_EVENT_TXACK_PACKET_SENT
 * events.
 */
RAIL_Status_t RAIL_GetTxPacketDetailsAlt(RAIL_Handle_t railHandle,
                                         bool isAck,
                                         RAIL_Time_t *pPacketTime);

/**
 * Get detailed information about the last packet transmitted.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in,out] pPacketDetails An application-provided pointer to store
 *   \ref RAIL_TxPacketDetails_t corresponding to the transmit event.
 *   The isAck field must be initialized prior to each call:
 *   - isAck true to obtain details about the most recent Ack transmit,
 *     false to obtain details about the most recent app-initiated transmit.
 *   The timeSent field packetTime will be populated with a timestamp
 *   corresponding to a default location in the packet. The timeSent field
 *   timePosition will be populated with a \ref RAIL_PacketTimePosition_t value
 *   specifying that default packet location.
 *   Call \ref RAIL_GetTxTimePreambleStartAlt(),
 *   \ref RAIL_GetTxTimeSyncWordEndAlt(), or \ref RAIL_GetTxTimeFrameEndAlt() to
 *   adjust the timestamp for different locations in the packet.
 * @return \ref RAIL_STATUS_NO_ERROR if pPacketDetails was filled in,
 *   or an appropriate error code otherwise.
 *
 * This function can only be called from callback context for either
 * \ref RAIL_EVENT_TX_PACKET_SENT or \ref RAIL_EVENT_TXACK_PACKET_SENT
 * events.
 */
RAIL_Status_t RAIL_GetTxPacketDetailsAlt2(RAIL_Handle_t railHandle,
                                          RAIL_TxPacketDetails_t *pPacketDetails);

/**
 * Adjust a RAIL TX completion timestamp to refer to the start of the
 * preamble. Also used to retrieve the \ref RAIL_EVENT_TX_STARTED
 * timestamp.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in] totalPacketBytes The total number of bytes of the transmitted
 *   packet for RAIL to use when adjusting the provided timestamp. This
 *   should account for all bytes transmitted over the air after the Preamble
 *   and Sync word(s), including CRC bytes. Pass \ref RAIL_TX_STARTED_BYTES
 *   to retrieve the start-of-normal-TX timestamp (see below).
 * @param[in,out] pPacketTime This points to the \ref RAIL_Time_t returned
 *   from a previous call to \ref RAIL_GetTxPacketDetailsAlt() for this same
 *   packet. That time will be updated with the time that the preamble for
 *   this packet started on air.
 *   Must be non-NULL.
 * @return \ref RAIL_STATUS_NO_ERROR if pPacketTime was successfully
 *   determined or an appropriate error code otherwise.
 *
 * When used for timestamp adjustment, call this function in the
 * same transmit-complete event-handling context as
 * \ref RAIL_GetTxPacketDetailsAlt() is called.
 *
 * This function may be called when handling the \ref RAIL_EVENT_TX_STARTED
 * event to retrieve that event's start-of-normal-TX timestamp. (Ack
 * transmits currently have no equivalent event or associated timestamp.)
 * In this case, totalPacketBytes must be \ref RAIL_TX_STARTED_BYTES, and
 * pPacketTime is an output-only parameter filled in with that time (so no
 * need to initialize it beforehand by calling \ref
 * RAIL_GetTxPacketDetailsAlt()).
 *
 */
RAIL_Status_t RAIL_GetTxTimePreambleStart(RAIL_Handle_t railHandle,
                                          uint16_t totalPacketBytes,
                                          RAIL_Time_t *pPacketTime);

/**
 * Adjust a RAIL TX completion timestamp to refer to the start of the
 * preamble. Also used to retrieve the \ref RAIL_EVENT_TX_STARTED
 * timestamp.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in,out] pPacketDetails A non-NULL pointer to the details that were returned from
 *   a previous call to \ref RAIL_GetTxPacketDetailsAlt2() for this same packet.
 *   The application must update the timeSent field totalPacketBytes to be
 *   the total number of bytes of the sent packet for RAIL to use when
 *   calculating the specified timestamp. This should account for all bytes
 *   transmitted over the air after the Preamble and Sync word(s), including CRC
 *   bytes. Pass \ref RAIL_TX_STARTED_BYTES to retrieve the start-of-normal-TX
 *   timestamp (see below). After this function, the timeSent field packetTime
 *   will be updated with the time that the preamble for this packet started on air.
 * @return \ref RAIL_STATUS_NO_ERROR if the packet time was successfully
 *   calculated, or an appropriate error code otherwise.
 *
 * When used for timestamp adjustment, call this function in the
 * same transmit-complete event-handling context as
 * \ref RAIL_GetTxPacketDetailsAlt2() is called.
 *
 * This function may be called when handling the \ref RAIL_EVENT_TX_STARTED
 * event to retrieve that event's start-of-normal-TX timestamp. (Ack
 * transmits currently have no equivalent event or associated timestamp.)
 * In this case, the timeSent field totalPacketBytes must be
 * \ref RAIL_TX_STARTED_BYTES, and the timeSent field packetTime is an
 * output-only parameter filled in with that time (so no need to initialize
 * it beforehand by calling \ref RAIL_GetTxPacketDetailsAlt2()).
 *
 */
RAIL_Status_t RAIL_GetTxTimePreambleStartAlt(RAIL_Handle_t railHandle,
                                             RAIL_TxPacketDetails_t *pPacketDetails);

/**
 * Adjust a RAIL TX timestamp to refer to the end of the sync word.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in] totalPacketBytes The total number of bytes of the transmitted
 *   packet for RAIL to use when calculating the specified timestamp. This
 *   should account for all bytes transmitted over the air after the Preamble
 *   and Sync word(s), including CRC bytes.
 * @param[in,out] pPacketTime The time that was returned in a
 *   \ref RAIL_Time_t from a previous call to \ref RAIL_GetTxPacketDetailsAlt()
 *   for this same packet. After this function, the time at that location will
 *   be updated with the time that the sync word for this packet finished on
 *   air. Must be non-NULL.
 * @return \ref RAIL_STATUS_NO_ERROR if pPacketTime was successfully calculated,
 *   or an appropriate error code otherwise.
 *
 * Call the timestamp adjustment function in the same
 * transmit-complete event-handling context as
 * \ref RAIL_GetTxPacketDetailsAlt() is called.
 */
RAIL_Status_t RAIL_GetTxTimeSyncWordEnd(RAIL_Handle_t railHandle,
                                        uint16_t totalPacketBytes,
                                        RAIL_Time_t *pPacketTime);

/**
 * Adjust a RAIL TX timestamp to refer to the end of the sync word.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in,out] pPacketDetails A non-NULL pointer to the details that were returned from
 *   a previous call to \ref RAIL_GetTxPacketDetailsAlt2() for this same packet.
 *   The application must update the timeSent field totalPacketBytes to be
 *   the total number of bytes of the sent packet for RAIL to use when
 *   calculating the specified timestamp. This should account for all bytes
 *   transmitted over the air after the Preamble and Sync word(s), including CRC
 *   bytes. After this function, the timeSent field packetTime
 *   will be updated with the time that the sync word for this packet finished on
 *   air.
 * @return \ref RAIL_STATUS_NO_ERROR if the packet time was successfully
 *   calculated, or an appropriate error code otherwise.
 *
 * Call the timestamp adjustment function in the same
 * transmit-complete event-handling context as
 * \ref RAIL_GetTxPacketDetailsAlt2() is called.
 */
RAIL_Status_t RAIL_GetTxTimeSyncWordEndAlt(RAIL_Handle_t railHandle,
                                           RAIL_TxPacketDetails_t *pPacketDetails);

/**
 * Adjust a RAIL TX timestamp to refer to the end of frame.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in] totalPacketBytes The total number of bytes of the transmitted
 *   packet for RAIL to use when calculating the specified timestamp. This
 *   should account for all bytes transmitted over the air after the Preamble
 *   and Sync word(s), including CRC bytes.
 * @param[in,out] pPacketTime The time that was returned in a
 *   \ref RAIL_Time_t from a previous call to \ref RAIL_GetTxPacketDetailsAlt()
 *   for this same packet. After this function, the time at that location will
 *   be updated with the time that this packet finished on air. Must be
 *   non-NULL.
 * @return \ref RAIL_STATUS_NO_ERROR if pPacketTime was successfully calculated,
 *   or an appropriate error code otherwise.
 *
 * Call the timestamp adjustment function in the same
 * transmit-complete event-handling context as
 * \ref RAIL_GetTxPacketDetailsAlt() is called.
 */
RAIL_Status_t RAIL_GetTxTimeFrameEnd(RAIL_Handle_t railHandle,
                                     uint16_t totalPacketBytes,
                                     RAIL_Time_t *pPacketTime);

/**
 * Adjust a RAIL TX timestamp to refer to the end of frame.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in,out] pPacketDetails A non-NULL pointer to the details that were returned from
 *   a previous call to \ref RAIL_GetTxPacketDetailsAlt2() for this same packet.
 *   The application must update the timeSent field totalPacketBytes to be
 *   the total number of bytes of the sent packet for RAIL to use when
 *   calculating the specified timestamp. This should account for all bytes
 *   transmitted over the air after the Preamble and Sync word(s), including CRC
 *   bytes. After this function, the timeSent field packetTime
 *   will be updated with the time that this packet finished on air.
 * @return \ref RAIL_STATUS_NO_ERROR if the packet time was successfully
 *   calculated, or an appropriate error code otherwise.
 *
 * Call the timestamp adjustment function in the same
 * transmit-complete event-handling context as
 * \ref RAIL_GetTxPacketDetailsAlt2() is called.
 */
RAIL_Status_t RAIL_GetTxTimeFrameEndAlt(RAIL_Handle_t railHandle,
                                        RAIL_TxPacketDetails_t *pPacketDetails);

/**
 * Prevent the radio from starting a transmit.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in] enable Enable/Disable TX hold off.
 * @return Status code indicating success of the function call.
 *
 * Enable TX hold off to prevent the radio from starting any transmits.
 * Disable TX hold off to allow the radio to transmit again.
 * Attempting to transmit with the TX hold off enabled will result in
 * \ref RAIL_EVENT_TX_BLOCKED and/or \ref RAIL_EVENT_TXACK_BLOCKED
 * events.
 *
 * @note This function does not affect a transmit that has already started.
 *   To stop an already-started transmission, use \ref RAIL_Idle() with
 *   \ref RAIL_IDLE_ABORT.
 */
RAIL_Status_t RAIL_EnableTxHoldOff(RAIL_Handle_t railHandle, bool enable);

/**
 * Check whether or not TX hold off is enabled.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @return true if TX hold off is enabled, false otherwise.
 *
 * TX hold off can be enabled/disabled using \ref RAIL_EnableTxHoldOff().
 * Attempting to transmit with the TX hold off enabled will block the
 * transmission and result in \ref RAIL_EVENT_TX_BLOCKED
 * and/or \ref RAIL_EVENT_TXACK_BLOCKED events.
 */
bool RAIL_IsTxHoldOffEnabled(RAIL_Handle_t railHandle);

/**
 * Set an alternate transmitter preamble length.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in] length The desired preamble length, in bits.
 * @return Status code indicating success of the function call.
 *
 * To cause a transmission to use this alternate preamble length,
 * specify \ref RAIL_TX_OPTION_ALT_PREAMBLE_LEN in the txOptions
 * parameter passed to the respective RAIL transmit API.
 *
 * @note Attempting to set a preamble length of 0xFFFF bits will result in
 *   \ref RAIL_STATUS_INVALID_PARAMETER.
 **/
RAIL_Status_t RAIL_SetTxAltPreambleLength(RAIL_Handle_t railHandle, uint16_t length);

/** @} */ // end of group Transmit

/******************************************************************************
 * Receive
 *****************************************************************************/
/**
 * @addtogroup Receive
 * @brief APIs related to packet receive
 * @{
 */

/**
 * Configure receive options.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in] mask A bitmask containing which options should be modified.
 * @param[in] options A bitmask containing desired configuration settings.
 *   Bit positions for each option are found in the \ref RAIL_RxOptions_t.
 * @return Status code indicating success of the function call.
 *
 * Configure the radio receive flow based on the list of available options.
 * Only the options indicated by the mask parameter will be affected. Pass
 * \ref RAIL_RX_OPTIONS_ALL to set all parameters.
 * The previous settings may affect the current frame if a packet is
 * received during this configuration.
 */
RAIL_Status_t RAIL_ConfigRxOptions(RAIL_Handle_t railHandle,
                                   RAIL_RxOptions_t mask,
                                   RAIL_RxOptions_t options);

/**
 * Include the code necessary for frame type based length decoding.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @return Status code indicating success of the function call.
 *
 * This function must be called before \ref RAIL_ConfigChannels() to allow configurations
 * using a frame type based length setup. It is called by default
 * in the \ref RAILCb_ConfigFrameTypeLength() API which can be overridden to save
 * code space.
 */
RAIL_Status_t RAIL_IncludeFrameTypeLength(RAIL_Handle_t railHandle);

/**
 * Handle frame type length.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in] frameType A pointer to a frame type configuration structure.
 *
 * This function is implemented in the radio configuration.
 * Currently, the frame type passed in only handles packet length decoding. If
 * NULL is passed into this function, it clears any currently configured
 * frame type settings. This will either be implemented as an empty function in
 * the radio configuration if it is not needed, to assist in dead code
 * elimination.
 */
void RAILCb_ConfigFrameTypeLength(RAIL_Handle_t railHandle,
                                  const RAIL_FrameType_t *frameType);

/**
 * Start the receiver on a specific channel.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in] channel The channel to listen on.
 * @param[in] schedulerInfo A pointer to information to allow the radio scheduler to place
 *   this receive appropriately. This is only used in multiprotocol version of
 *   RAIL and may be set to NULL in all other versions.
 * @return Status code indicating success of the function call.
 *
 * This is a non-blocking function. Whenever a packet is received, \ref RAIL_Config_t::eventsCallback
 * will fire with \ref RAIL_EVENT_RX_PACKET_RECEIVED set. If you call
 * this while not idle but with a different channel, any ongoing
 * receive or transmit operation will be aborted.
 */
RAIL_Status_t RAIL_StartRx(RAIL_Handle_t railHandle,
                           uint16_t channel,
                           const RAIL_SchedulerInfo_t *schedulerInfo);

/**
 * Schedule a receive window for some future time.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in] channel A channel to listen on.
 * @param[in] cfg A pointer to a configuration structure to define the receive window.
 * @param[in] schedulerInfo A pointer to information to allow the radio scheduler to place
 *   this receive appropriately. This is only used in multiprotocol version of
 *   RAIL and may be set to NULL in all other versions.
 * @return Status code indicating success of the function call.
 *
 * This API immediately changes the channel and schedules receive to start
 * at the specified time and end at the given end time. If you do not specify
 * an end time, you may call this API later with an end time as long as you set
 * the start time to disabled. You can also terminate the receive
 * operation immediately using the \ref RAIL_Idle() function. Note that relative
 * end times are always relative to the start unless no start time is
 * specified. If changing channels, the channel is changed immediately and
 * will abort any ongoing packet transmission or reception.
 *
 * Returns an error if a CSMA or LBT transmit is still in progress.
 *
 * In multiprotocol, ensure that you properly yield the radio after this
 * call. See \ref rail_radio_scheduler_yield for more details.
 */
RAIL_Status_t RAIL_ScheduleRx(RAIL_Handle_t railHandle,
                              uint16_t channel,
                              const RAIL_ScheduleRxConfig_t *cfg,
                              const RAIL_SchedulerInfo_t *schedulerInfo);

/**
 * Enable automatic PRS LNA bypass for external FEM.
 *
 * @param[in] railHandle A radio-generic or real RAIL instance handle.
 * @param[in] enable Enable/Disable automatic PRS LNA bypass.
 * @param[in] pPrsLnaBypassConfig A pointer to an automatic PRS LNA bypass
 *   configuration structure. It must be non-NULL to enable the feature.
 * @return Status code indicating success of the function call.
 *
 * If automatic PRS LNA bypass is enabled on chip that supports the feature
 * (\ref RAIL_SUPPORTS_PRS_LNA_BYPASS), a level is generated on a PRS channel
 * when the received power exceed a threshold. It is turned off after frame
 * reception or after timeout if no frame has been detected.
 *
 * @warning As this function relies on PRS access and RAIL is meant to run in
 *   TrustZone non-secure world, it is not supported if PRS is configured as
 *   secure peripheral and it will return \ref RAIL_STATUS_INVALID_CALL.
 */
RAIL_Status_t RAIL_EnablePrsLnaBypass(RAIL_Handle_t railHandle,
                                      bool enable,
                                      const RAIL_PrsLnaBypassConfig_t *pPrsLnaBypassConfig);

/******************************************************************************
 * Packet Information (RX)
 *****************************************************************************/
/// @addtogroup Packet_Information Packet Information
/// @brief APIs to get information about received packets.
///
/// After receiving a packet, RAIL will trigger a
/// \ref RAIL_EVENT_RX_PACKET_RECEIVED event. At that point, there is a variety
/// of information available to the application about the received packet. The
/// following example code assumes that the
/// \ref RAIL_RX_OPTION_REMOVE_APPENDED_INFO is not used, and the application
/// wants as much data about the packet as possible.
/// @code{.c}
/// // Get all information about a received packet.
/// RAIL_Status_t status;
/// RAIL_RxPacketInfo_t rxInfo;
/// RAIL_RxPacketDetails_t rxDetails;
/// RAIL_RxPacketHandle_t rxHandle
///   = RAIL_GetRxPacketInfo(railHandle, RAIL_RX_PACKET_HANDLE_NEWEST, &rxInfo);
/// assert(rxHandle != RAIL_RX_PACKET_HANDLE_INVALID);
/// status = RAIL_GetRxPacketDetailsAlt(railHandle, rxHandle, &rxDetails);
/// assert(status == RAIL_STATUS_NO_ERROR);
/// if (rxDetails.timeReceived.timePosition == RAIL_PACKET_TIME_INVALID) {
///   return; // No timestamp available for this packet
/// }
/// // CRC_BYTES only needs to be added when not using RAIL_RX_OPTION_STORE_CRC
/// rxDetails.timeReceived.totalPacketBytes = rxInfo.packetBytes + CRC_BYTES;
/// // Choose the function which gives the desired timestamp
/// status = RAIL_GetRxTimeFrameEndAlt(railHandle, &rxDetails);
/// assert(status == RAIL_STATUS_NO_ERROR);
/// // Now all fields of rxInfo and rxDetails have been populated correctly
/// @endcode
///
/// @{

/**
 * Get basic information about a pending or received packet.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in] packetHandle A packet handle for the unreleased packet as
 *   returned from a previous call, or sentinel values
 *   \ref RAIL_RX_PACKET_HANDLE_OLDEST,
 *   \ref RAIL_RX_PACKET_HANDLE_OLDEST_COMPLETE or
 *   \ref RAIL_RX_PACKET_HANDLE_NEWEST.
 * @param[out] pPacketInfo A non-NULL pointer to a \ref RAIL_RxPacketInfo_t
 *   to store info for the requested packet.
 * @return The packet handle for the requested packet:
 *   if packetHandle was one of the sentinel values, returns the actual
 *   packet handle for that packet, otherwise returns packetHandle.
 *   It may return \ref RAIL_RX_PACKET_HANDLE_INVALID to indicate an error.
 *
 * This function can be used in any RX mode. It does not free any receive FIFO
 * or internal receive resources. If used in receive
 * \ref RAIL_DataMethod_t::FIFO_MODE, the
 * value in \ref RAIL_RxPacketInfo_t::packetBytes will only return the data
 * remaining in the FIFO. Any data read via earlier calls to
 * \ref RAIL_ReadRxFifo() is not included.
 *
 * @note When getting information about an arriving packet that is not yet complete,
 *   (i.e., pPacketInfo->packetStatus == \ref RAIL_RX_PACKET_RECEIVING), keep
 *   in mind its data is highly suspect because it has not yet passed any CRC
 *   integrity checking. Also note that the packet could be aborted, canceled, or
 *   fail momentarily, invalidating its data in Packet mode. Furthermore, there
 *   is a small chance towards the end of packet reception that the filled-in
 *   \ref RAIL_RxPacketInfo_t could include not only packet data received so far,
 *   but also some raw radio-appended info detail bytes that RAIL's
 *   packet-completion processing will subsequently deal with. It's up to the
 *   application to know its packet format well enough to avoid confusing such
 *   info as packet data.
 */
RAIL_RxPacketHandle_t RAIL_GetRxPacketInfo(RAIL_Handle_t railHandle,
                                           RAIL_RxPacketHandle_t packetHandle,
                                           RAIL_RxPacketInfo_t *pPacketInfo);

/**
 * Get information about the live incoming packet (if any).
 * Differs from \ref RAIL_GetRxPacketInfo() by only returning information
 * about a packet actively being received, something which even the
 * \ref RAIL_RX_PACKET_HANDLE_NEWEST may not represent if there are
 * completed but unprocessed packets in the receive FIFO.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[out] pPacketInfo A non-NULL pointer to store \ref RAIL_RxPacketInfo_t
 *   for the incoming packet.
 * @return Status code indicating success of the function call.
 *
 * This function can only be called from callback context, e.g.,
 * when handling \ref RAIL_EVENT_RX_FILTER_PASSED or
 * \ref RAIL_EVENT_IEEE802154_DATA_REQUEST_COMMAND.
 * It must not be used with receive \ref RAIL_DataMethod_t::FIFO_MODE
 * if any portion of an incoming packet has already been extracted from
 * the receive FIFO.
 *
 * @note The incomplete data of an arriving packet is highly suspect because
 *   it has not yet passed any CRC integrity checking. Also note that the
 *   packet could be aborted, canceled, or fail momentarily, invalidating
 *   its data in Packet mode. Furthermore, there is a small chance towards
 *   the end of packet reception that the filled-in \ref RAIL_RxPacketInfo_t
 *   could include not only packet data received so far, but also some raw
 *   radio-appended info detail bytes that RAIL's packet-completion
 *   processing will subsequently deal with. It's up to the application to
 *   know its packet format well enough to avoid confusing such info as
 *   packet data.
 */
RAIL_Status_t RAIL_GetRxIncomingPacketInfo(RAIL_Handle_t railHandle,
                                           RAIL_RxPacketInfo_t *pPacketInfo);

/**
 * Copy a full packet to a user-specified contiguous buffer.
 *
 * @param[out] pDest A non-NULL application-provided pointer to a buffer of at
 *   least pPacketInfo->packetBytes in size to store the packet data
 *   contiguously. This buffer must never overlay RAIL's receive FIFO buffer.
 *   Exactly pPacketInfo->packetBytes of packet data will be written into it.
 * @param[in] pPacketInfo A non-NULL pointer to the
 *   \ref RAIL_RxPacketInfo_t for the requested packet.
 *
 * @note This is a convenience helper function, which
 *   is intended to be expedient. As a result, it does not
 *   check the validity of its arguments,
 *   so don't pass either as NULL, and don't
 *   pass a pDest pointer to a buffer that's too small for the packet's data.
 * @note If only a portion of the packet is needed, use \ref RAIL_PeekRxPacket()
 *   instead.
 */
static inline
void RAIL_CopyRxPacket(uint8_t *pDest,
                       const RAIL_RxPacketInfo_t *pPacketInfo)
{
  (void)memcpy(pDest, pPacketInfo->firstPortionData, pPacketInfo->firstPortionBytes);
  if (pPacketInfo->lastPortionData != NULL) {
    uint16_t size = pPacketInfo->packetBytes - pPacketInfo->firstPortionBytes;
    (void)memcpy(pDest + pPacketInfo->firstPortionBytes,
                 pPacketInfo->lastPortionData, size);
  }
}

/**
 * Get detailed information about a received packet.
 * This function can be used in any RX mode; it does not free any receive FIFO
 * or internal receive resources.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in] packetHandle A packet handle for the unreleased packet as
 *   returned from a previous call to RAIL_GetRxPacketInfo() or
 *   RAIL_HoldRxPacket(), or sentinel values \ref RAIL_RX_PACKET_HANDLE_OLDEST,
 *   \ref RAIL_RX_PACKET_HANDLE_OLDEST_COMPLETE
 *   or \ref RAIL_RX_PACKET_HANDLE_NEWEST.
 * @param[in,out] pPacketDetails An application-provided non-NULL pointer to
 *   store \ref RAIL_RxPacketDetails_t for the requested packet.
 *   For \ref RAIL_RxPacketStatus_t RAIL_RX_PACKET_READY_ packets,
 *   the timeReceived fields totalPacketBytes and timePosition must be
 *   initialized prior to each call:
 *   - totalPacketBytes with the total number of bytes of the received
 *     packet for RAIL to use when calculating the specified timestamp.
 *     This should account for all bytes received over the air after the
 *     Preamble and Sync word(s), including CRC bytes.
 *   - timePosition with a \ref RAIL_PacketTimePosition_t value specifying
 *     the packet position to put in the timeReceived field on return.
 *     This field will also be updated with the actual position corresponding
 *     to the timeReceived value filled in.
 * @return \ref RAIL_STATUS_NO_ERROR if pPacketDetails was filled in,
 *   or an appropriate error code otherwise.
 *
 * @note Certain details are always available, while others are only available
 *   if the \ref RAIL_RxOptions_t \ref RAIL_RX_OPTION_REMOVE_APPENDED_INFO
 *   option is not in effect and the received packet's
 *   \ref RAIL_RxPacketStatus_t is among the RAIL_RX_PACKET_READY_ set.
 *   See \ref RAIL_RxPacketDetails_t for clarification.
 *
 * @note Consider using \ref RAIL_GetRxPacketDetailsAlt for smaller code size.
 */
RAIL_Status_t RAIL_GetRxPacketDetails(RAIL_Handle_t railHandle,
                                      RAIL_RxPacketHandle_t packetHandle,
                                      RAIL_RxPacketDetails_t *pPacketDetails);

/**
 * Get detailed information about a received packet.
 * This function can be used in any RX mode; it does not free any receive FIFO
 * or receive internal resources.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in] packetHandle A packet handle for the unreleased packet as
 *   returned from a previous call to \ref RAIL_GetRxPacketInfo() or
 *   \ref RAIL_HoldRxPacket(), or sentinel values \ref RAIL_RX_PACKET_HANDLE_OLDEST
 *   \ref RAIL_RX_PACKET_HANDLE_OLDEST_COMPLETE or
 *   \ref RAIL_RX_PACKET_HANDLE_NEWEST.
 * @param[out] pPacketDetails A non-NULL application-provided pointer to
 *   store \ref RAIL_RxPacketDetails_t for the requested packet.
 *   For \ref RAIL_RxPacketStatus_t RAIL_RX_PACKET_READY_ packets,
 *   the timeReceived field packetTime will be populated with a timestamp
 *   corresponding to a default location in the packet. The timeReceived field
 *   timePosition will be populated with a \ref RAIL_PacketTimePosition_t value
 *   specifying that default packet location. Call
 *   \ref RAIL_GetRxTimePreambleStart(), \ref RAIL_GetRxTimeSyncWordEnd(), or
 *   \ref RAIL_GetRxTimeFrameEnd() to adjust that timestamp for different
 *   locations in the packet.
 * @return \ref RAIL_STATUS_NO_ERROR if pPacketDetails was filled in,
 *   or an appropriate error code otherwise.
 *
 * This alternative API allows for smaller code size by deadstripping the
 * timestamp adjustment algorithms which are not in use.
 *
 * @note Certain details are always available, while others are only available
 *   if the \ref RAIL_RxOptions_t \ref RAIL_RX_OPTION_REMOVE_APPENDED_INFO
 *   option is not in effect and the received packet's
 *   \ref RAIL_RxPacketStatus_t is among the RAIL_RX_PACKET_READY_ set.
 *   See \ref RAIL_RxPacketDetails_t for clarification.
 *
 * @note This function should be called soon (no more than a minute) after
 *   packet reception for the packet timestamp information to be valid.
 */
RAIL_Status_t RAIL_GetRxPacketDetailsAlt(RAIL_Handle_t railHandle,
                                         RAIL_RxPacketHandle_t packetHandle,
                                         RAIL_RxPacketDetails_t *pPacketDetails);

/**
 * Adjust a RAIL RX timestamp to refer to the start of the preamble.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in] totalPacketBytes The total number of bytes of the received packet
 *   for RAIL to use when calculating the specified timestamp. This should
 *   account for all bytes received over the air after the Preamble and Sync
 *   word(s), including CRC bytes.
 * @param[in,out] pPacketTime A pointer to the time that was returned in the
 *   \ref RAIL_PacketTimeStamp_t::packetTime field of
 *   \ref RAIL_RxPacketDetails_t::timeReceived from a previous call to
 *   \ref RAIL_GetRxPacketDetailsAlt for this same packet. After this
 *   function, the time at that location will be updated with the time that the
 *   preamble for this packet started on air. Must be non-NULL.
 * @return \ref RAIL_STATUS_NO_ERROR if pPacketTime was successfully calculated,
 *   or an appropriate error code otherwise.
 *
 * Call this API while the given railHandle is active, or it will
 * return an error code of \ref RAIL_STATUS_INVALID_STATE. Note that this API
 * may return incorrect timestamps when sub-phys are in use. Prefer
 * \ref RAIL_GetRxTimePreambleStartAlt in those situations. See
 * \ref RAIL_RxPacketDetails_t::subPhyId for more details.
 */
RAIL_Status_t RAIL_GetRxTimePreambleStart(RAIL_Handle_t railHandle,
                                          uint16_t totalPacketBytes,
                                          RAIL_Time_t *pPacketTime);

/**
 * Adjust a RAIL RX timestamp to refer to the start of the preamble.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in,out] pPacketDetails A non-NULL pointer to the details that were returned from
 *   a previous call to \ref RAIL_GetRxPacketDetailsAlt() for this same packet.
 *   The application must update the timeReceived field totalPacketBytes to be
 *   the total number of bytes of the received packet for RAIL to use when
 *   calculating the specified timestamp. This should account for all bytes
 *   received over the air after the Preamble and Sync word(s), including CRC
 *   bytes. After this function, the timeReceived field packetTime will be
 *   updated with the time that the preamble for this packet started on air.
 * @return \ref RAIL_STATUS_NO_ERROR if the packet time was successfully
 *   calculated, or an appropriate error code otherwise.
 */
RAIL_Status_t RAIL_GetRxTimePreambleStartAlt(RAIL_Handle_t railHandle,
                                             RAIL_RxPacketDetails_t *pPacketDetails);

/**
 * Adjust a RAIL RX timestamp to refer to the end of the sync word.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in] totalPacketBytes The total number of bytes of the received packet
 *   for RAIL to use when calculating the specified timestamp. This should
 *   account for all bytes received over the air after the Preamble and Sync
 *   word(s), including CRC bytes.
 * @param[in,out] pPacketTime A pointer to the time that was returned in the
 *   \ref RAIL_PacketTimeStamp_t::packetTime field of
 *   \ref RAIL_RxPacketDetails_t::timeReceived from a previous call to
 *   \ref RAIL_GetRxPacketDetailsAlt for this same packet. After this
 *   function, the time at that location will be updated with the time that the
 *   sync word for this packet finished on air. Must be non-NULL.
 * @return \ref RAIL_STATUS_NO_ERROR if pPacketTime was successfully calculated,
 *   or an appropriate error code otherwise.
 *
 * Call this API while the given railHandle is active, or it will
 * return an error code of \ref RAIL_STATUS_INVALID_STATE. Note that this API
 * may return incorrect timestamps when sub-phys are in use. Prefer
 * \ref RAIL_GetRxTimePreambleStartAlt in those situations. See
 * \ref RAIL_RxPacketDetails_t::subPhyId for more details.
 */
RAIL_Status_t RAIL_GetRxTimeSyncWordEnd(RAIL_Handle_t railHandle,
                                        uint16_t totalPacketBytes,
                                        RAIL_Time_t *pPacketTime);

/**
 * Adjust a RAIL RX timestamp to refer to the end of the sync word.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in,out] pPacketDetails A non-NULL pointer to the details that were returned from
 *   a previous call to \ref RAIL_GetRxPacketDetailsAlt() for this same packet.
 *   The application must update the timeReceived field totalPacketBytes to be
 *   the total number of bytes of the received packet for RAIL to use when
 *   calculating the specified timestamp. This should account for all bytes
 *   received over the air after the Preamble and Sync word(s), including CRC
 *   bytes. After this function, the timeReceived field packetTime will be
 *   updated with the time that the sync word for this packet finished on air.
 * @return \ref RAIL_STATUS_NO_ERROR if the packet time was successfully
 *   calculated, or an appropriate error code otherwise.
 */
RAIL_Status_t RAIL_GetRxTimeSyncWordEndAlt(RAIL_Handle_t railHandle,
                                           RAIL_RxPacketDetails_t *pPacketDetails);

/**
 * Adjust a RAIL RX timestamp to refer to the end of frame.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in] totalPacketBytes The total number of bytes of the received packet
 *   for RAIL to use when calculating the specified timestamp. This should
 *   account for all bytes received over the air after the Preamble and Sync
 *   word(s), including CRC bytes.
 * @param[in,out] pPacketTime A pointer to the time that was returned in the
 *   \ref RAIL_PacketTimeStamp_t::packetTime field of
 *   \ref RAIL_RxPacketDetails_t::timeReceived from a previous call to
 *   \ref RAIL_GetRxPacketDetailsAlt for this same packet. After this
 *   function, the time at that location will be updated with the time that this
 *   packet finished on air. Must be non-NULL.
 * @return \ref RAIL_STATUS_NO_ERROR if pPacketTime was successfully calculated,
 *   or an appropriate error code otherwise.
 *
 * Call this API while the given railHandle is active, or it will
 * return an error code of \ref RAIL_STATUS_INVALID_STATE. Note that this API
 * may return incorrect timestamps when sub-phys are in use. Prefer
 * \ref RAIL_GetRxTimePreambleStartAlt in those situations. See
 * \ref RAIL_RxPacketDetails_t::subPhyId for more details.
 */
RAIL_Status_t RAIL_GetRxTimeFrameEnd(RAIL_Handle_t railHandle,
                                     uint16_t totalPacketBytes,
                                     RAIL_Time_t *pPacketTime);

/**
 * Adjust a RAIL RX timestamp to refer to the end of frame.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in,out] pPacketDetails A non-NULL pointer to the details that were returned from
 *   a previous call to \ref RAIL_GetRxPacketDetailsAlt() for this same packet.
 *   The application must update the timeReceived field totalPacketBytes to be
 *   the total number of bytes of the received packet for RAIL to use when
 *   calculating the specified timestamp. This should account for all bytes
 *   received over the air after the Preamble and Sync word(s), including CRC
 *   bytes. After this function, the timeReceived field packetTime will be
 *   updated with the time that the packet finished on air.
 * @return \ref RAIL_STATUS_NO_ERROR if the packet time was successfully
 *   calculated, or an appropriate error code otherwise.
 */
RAIL_Status_t RAIL_GetRxTimeFrameEndAlt(RAIL_Handle_t railHandle,
                                        RAIL_RxPacketDetails_t *pPacketDetails);

/** @} */ // end of group Packet_Information

/**
 * Place a temporary hold on this packet's data in the receive
 * FIFO and internal packet metadata FIFO.
 *
 * This function can only be called from within RAIL callback context.
 * It can be used in any RX mode.
 *
 * Normally, when RAIL issues its callback indicating a packet is ready
 * or aborted, it expects the application's callback to retrieve and
 * copy (or discard) the packet's information and data, and will free
 * the packet data and metadata after the callback returns. This function
 * tells RAIL to hold onto those resources in the receive FIFO and internal
 * metadata FIFO after the callback returns in case the application wants to
 * defer processing the packet to a later time, e.g., outside of callback
 * context.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @return The packet handle for the packet associated with the callback,
 *   \ref RAIL_RX_PACKET_HANDLE_INVALID if no such packet yet exists or
 *   railHandle is not active.
 *
 * @note When using multiprotocol the receive FIFO and internal receive
 *   metadata FIFO are reset during protocol switches losing any held packets.
 *   It is best to avoid using \ref RAIL_HoldRxPacket in DMP or to at least
 *   invalidate any held packet handles and related \ref RAIL_RxPacketInfo_t
 *   information when the \ref RAIL_EVENT_CONFIG_UNSCHEDULED occurs.
 */
RAIL_RxPacketHandle_t RAIL_HoldRxPacket(RAIL_Handle_t railHandle);

/**
 * Copy 'len' bytes of packet data starting from 'offset' from the
 * receive FIFO. Those bytes remain valid for re-peeking.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in] packetHandle A packet handle as returned from a previous
 *   \ref RAIL_GetRxPacketInfo() or \ref RAIL_HoldRxPacket() call, or
 *   sentinel values \ref RAIL_RX_PACKET_HANDLE_OLDEST,
 *   \ref RAIL_RX_PACKET_HANDLE_OLDEST_COMPLETE
 *   or \ref RAIL_RX_PACKET_HANDLE_NEWEST.
 * @param[out] pDst A pointer to the location where the received bytes will
 *   be copied. If NULL, no copying occurs.
 * @param[in] len A number of packet data bytes to copy.
 * @param[in] offset A byte offset within remaining packet data from which
 *   to copy.
 * @return Number of packet bytes copied.
 *
 * @note Peek does not permit peeking beyond the requested packet's
 *   available packet data (though there is a small chance it might
 *   for a \ref RAIL_RX_PACKET_HANDLE_NEWEST packet at the very end of
 *   still being received). Nor can one peek into already-consumed data read
 *   by \ref RAIL_ReadRxFifo(). len and offset are relative to the remaining data
 *   available in the packet, if any was already consumed by \ref RAIL_ReadRxFifo().
 */
uint16_t RAIL_PeekRxPacket(RAIL_Handle_t railHandle,
                           RAIL_RxPacketHandle_t packetHandle,
                           uint8_t *pDst,
                           uint16_t len,
                           uint16_t offset);

/**
 * Release RAIL's resources for a packet previously held in the receive FIFO
 * and internal receive metadata FIFO.
 *
 * This function must be called for any packet previously held via
 * \ref RAIL_HoldRxPacket(). It may optionally be called within a
 * callback context to release RAIL resources sooner than at
 * callback completion time when not holding the packet.
 * This function can be used in any RX mode.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in] packetHandle A packet handle as returned from a previous
 *   \ref RAIL_HoldRxPacket() call, or sentinel values
 *   \ref RAIL_RX_PACKET_HANDLE_OLDEST,
 *   \ref RAIL_RX_PACKET_HANDLE_OLDEST_COMPLETE
 *   or \ref RAIL_RX_PACKET_HANDLE_NEWEST.
 *   The latter might be used within RAIL callback context to explicitly
 *   release the packet associated with the callback early, before it's
 *   released automatically by RAIL on callback return (unless explicitly
 *   held).
 * @return \ref RAIL_STATUS_NO_ERROR if the held packet was released
 *   or an appropriate error code otherwise.
 */
RAIL_Status_t RAIL_ReleaseRxPacket(RAIL_Handle_t railHandle,
                                   RAIL_RxPacketHandle_t packetHandle);

/**
 * Return the current raw RSSI.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in] wait if false returns instant RSSI with no checks.
 * @return \ref RAIL_RSSI_INVALID if the receiver is disabled and an RSSI
 *   value can't be obtained. Otherwise, return the RSSI in quarter dBm, dbm*4.
 *
 * Gets the current RSSI value. This value represents the current energy of the
 * channel. It can change rapidly and will be low if no RF energy is
 * in the current channel. The function from the value reported to dBm is an
 * offset dependent on the PHY and the PCB layout. Characterize the
 * RSSI received on your hardware and apply an offset in the application to
 * account for board and PHY parameters. When 'wait' is false, the radio needs
 * to be currently in RX and have been in there for a sufficient amount of time
 * for a fresh RSSI value to be read and returned. Otherwise, the RSSI is
 * considered stale and \ref RAIL_RSSI_INVALID is returned instead. When 'wait'
 * is true, if the radio is transitioning to or already in RX, this function
 * will wait for a valid RSSI to be read and return it. Otherwise, if the radio
 * is in or transitions to IDLE or TX, \ref RAIL_RSSI_INVALID will be returned.
 * On low datarate PHYs, this function can take a significantly longer time when
 * wait is true.
 *
 * In multiprotocol, this function returns \ref RAIL_RSSI_INVALID
 * immediately if railHandle is not the currently active \ref RAIL_Handle_t.
 * Additionally, 'wait' should never be set 'true' in multiprotocol
 * as the wait time is not consistent, so scheduling a scheduler
 * slot cannot be done accurately. Rather if waiting for a valid RSSI is
 * desired, use \ref RAIL_GetRssiAlt instead to apply a bounded time period.
 *
 * @note If RX Antenna Diversity is enabled via \ref RAIL_ConfigRxOptions(),
 *   pass true for the wait parameter otherwise it's very likely
 *   \ref RAIL_RSSI_INVALID will be returned.
 *
 * @note If RX channel hopping is turned on, do not use this API.
 *   Instead, see RAIL_GetChannelHoppingRssi().
 *
 * @note When 'wait' is false, this API is equivalent to \ref RAIL_GetRssiAlt
 *   with 'waitTimeout' set to \ref RAIL_GET_RSSI_NO_WAIT. When 'wait' is
 *   true, this API is equivalent to \ref RAIL_GetRssiAlt with 'waitTimeout'
 *   set to \ref RAIL_GET_RSSI_WAIT_WITHOUT_TIMEOUT. Consider using
 *   \ref RAIL_GetRssiAlt if a bounded maximum wait timeout is desired.
 */
int16_t RAIL_GetRssi(RAIL_Handle_t railHandle, bool wait);

/**
 * Return the current raw RSSI in quarter-dBm within a definitive time period.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in] waitTimeout Sets the maximum time in microseconds to wait for a valid RSSI.
 *   If equal to \ref RAIL_GET_RSSI_NO_WAIT returns instant RSSI with no checks.
 *   If equal to \ref RAIL_GET_RSSI_WAIT_WITHOUT_TIMEOUT waits for a valid RSSI
 *   with no maximum timeout.
 * @return \ref RAIL_RSSI_INVALID if the receiver is disabled and an RSSI
 *   value can't be obtained. Otherwise, return the RSSI in quarter dBm (dBm*4).
 *
 * Gets the current RSSI value. This value represents the current energy of the
 * channel. It can change rapidly, and will be low if no RF energy is
 * in the current channel. The function from the value reported to dBm is an
 * offset dependent on the PHY and the PCB layout. Characterize the
 * RSSI received on your hardware and apply an offset in the application to
 * account for board and PHY parameters. If a value of \ref RAIL_GET_RSSI_NO_WAIT
 * is given for waitTimeout, the radio needs to be currently in RX and have been
 * in there for a sufficient amount of time for a fresh RSSI value to be read and
 * returned. Otherwise the RSSI is considered stale and \ref RAIL_RSSI_INVALID is
 * returned instead. For non-zero values of waitTimeout, if the radio is
 * transitioning to or already in RX, this function will wait a maximum time equal
 * to waitTimeout (or indefinitely if waitTimeout is set to
 * \ref RAIL_GET_RSSI_WAIT_WITHOUT_TIMEOUT) for a valid RSSI to be read and return
 * it. Otherwise, if the waitTimeout is reached, or the radio is in or transitions
 * to IDLE or TX, \ref RAIL_RSSI_INVALID will be returned. On low datarate PHYs,
 * this function can take a significantly longer time when waitTimeout is non-zero.
 *
 * In multiprotocol, this function returns \ref RAIL_RSSI_INVALID
 * immediately if railHandle is not the currently active \ref RAIL_Handle_t.
 * Additionally, waitTimeout should never be set to a value other than
 * \ref RAIL_GET_RSSI_NO_WAIT in multiprotocol as the integration between this
 * feature and the radio scheduler has not been implemented.
 *
 * @note If RX Antenna Diversity is enabled via \ref RAIL_ConfigRxOptions(),
 *   pass true for the wait parameter otherwise it's very likely
 *   \ref RAIL_RSSI_INVALID will be returned.
 *
 * @note If RX Antenna Diversity is enabled via \ref RAIL_ConfigRxOptions(),
 *   the RSSI value returned could come from either antenna and vary between antennas.
 *
 * @note If RX channel hopping is turned on, do not use this API.
 *   Instead, see \ref RAIL_GetChannelHoppingRssi().
 */
int16_t RAIL_GetRssiAlt(RAIL_Handle_t railHandle, RAIL_Time_t waitTimeout);

/**
 * Start the RSSI averaging over a specified time in us.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in] channel The physical channel to set.
 * @param[in] averagingTimeUs Averaging time in microseconds.
 * @param[in] schedulerInfo A pointer to information to allow the radio scheduler to place
 *   this operation appropriately. This is only used in multiprotocol version of
 *   RAIL and may be set to NULL in all other versions.
 * @return Status code indicating success of the function call.
 *
 * Starts a non-blocking hardware-based RSSI averaging mechanism. Only a single
 * instance of RSSI averaging can be run at any time and the radio must be idle
 * to start.
 *
 * In multiprotocol, this is a scheduled event. It will start when railHandle
 * becomes active. railHandle needs to stay active until the averaging
 * completes. If the averaging is interrupted, calls to
 * \ref RAIL_GetAverageRssi() will return \ref RAIL_RSSI_INVALID.
 *
 * Also in multiprotocol, the user is required to call \ref RAIL_YieldRadio()
 * after this event completes (i.e., when \ref RAIL_EVENT_RSSI_AVERAGE_DONE
 * occurs).
 *
 * @note If the radio is idled while RSSI averaging is still in effect, a
 *   \ref RAIL_EVENT_RSSI_AVERAGE_DONE event may not occur and
 *   \ref RAIL_IsAverageRssiReady() may never return true.
 *
 * @note Completion of RSSI averaging, marked by RAIL event
 *   \ref RAIL_EVENT_RSSI_AVERAGE_DONE, will return the radio to idle state.
 */
RAIL_Status_t RAIL_StartAverageRssi(RAIL_Handle_t railHandle,
                                    uint16_t channel,
                                    RAIL_Time_t averagingTimeUs,
                                    const RAIL_SchedulerInfo_t *schedulerInfo);

/**
 * Query whether the RSSI averaging is done.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @return true if done and false otherwise.
 *
 * This function can be used to poll for completion of the RSSI averaging
 * to avoid relying on an interrupt-based callback.
 *
 * @note If the radio is idled while RSSI averaging is still in effect,
 *   this function may never return true.
 */
bool RAIL_IsAverageRssiReady(RAIL_Handle_t railHandle);

/**
 * Get the RSSI in quarter-dBm averaged over a specified time in microseconds.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @return The RSSI in quarter-dBm (dBm * 4), or \ref RAIL_RSSI_INVALID
 *   if the receiver is disabled or an an RSSI value couldn't be obtained.
 *
 * Gets the hardware RSSI average after issuing \ref RAIL_StartAverageRssi().
 * Use after \ref RAIL_StartAverageRssi().
 */
int16_t RAIL_GetAverageRssi(RAIL_Handle_t railHandle);

/**
 * Set the RSSI offset.
 *
 * @param[in] railHandle A radio-generic or real RAIL instance handle.
 * @param[in] rssiOffset desired dB offset to be added to the RSSI measurements.
 * @return Status code indicating success of the function call.
 *   \ref RAIL_STATUS_INVALID_CALL if called with radio-generic handle, such
 *   as \ref RAIL_EFR32_HANDLE, after RAIL initialization.
 *   \ref RAIL_STATUS_INVALID_PARAMETER if the RSSI offset is deemed large
 *   enough to cause the RSSI readings to underflow or overflow.
 *
 * Adds an offset to the RSSI in dBm. This offset affects all functionality that
 * depends on RSSI values, such as CCA functions. Do not modify the offset
 * dynamically during packet reception. This function
 * can only be called while the radio is off, or in the case of multiprotocol,
 * on an inactive protocol.
 *
 * @note: If RAIL has not been initialized, a radio-generic handle,
 *   such as \ref RAIL_EFR32_HANDLE, can be used to set a radio's RSSI offset
 *   applied to all protocols on that radio.
 *
 * @note: Setting a large rssiOffset may still cause the RSSI readings to
 *   underflow. If that happens, the RSSI value returned by
 *   \ref RAIL_GetRssi(), \ref RAIL_GetAverageRssi(),
 *   \ref RAIL_GetChannelHoppingRssi() etc. will be \ref RAIL_RSSI_LOWEST.
 *
 * @note: During \ref Rx_Channel_Hopping this API will not update the
 *   RSSI offset immediately if channel hopping has already been configured.
 *   A subsequent call to \ref RAIL_ZWAVE_ConfigRxChannelHopping() or
 *   \ref RAIL_ConfigRxChannelHopping() is required for the new RSSI offset to
 *   take effect.
 */
RAIL_Status_t RAIL_SetRssiOffset(RAIL_Handle_t railHandle, int8_t rssiOffset);

/**
 * Get the radio or protocol RSSI offset in dB.
 *
 * @param[in] railHandle A radio-generic or real RAIL instance handle.
 * @return The RSSI offset in dB corresponding to the railHandle.
 *
 * @note: A radio-generic handle, such as \ref RAIL_EFR32_HANDLE, can be used to
 *   get the radio's RSSI offset otherwise this will return the RSSI offset
 *   value associated with the RAIL protocol instance handle, exclusive of any
 *   radio RSSI offset correction, if any.
 */
int8_t RAIL_GetRssiOffset(RAIL_Handle_t railHandle);

/**
 * Set the RSSI detection threshold in dBm to trigger
 * \ref RAIL_EVENT_DETECT_RSSI_THRESHOLD.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in] rssiThresholdDbm desired RSSI threshold in dBm over which the event
 *   \ref RAIL_EVENT_DETECT_RSSI_THRESHOLD is triggered.
 * @return Status code indicating success of the function call.
 *   Returns \ref RAIL_STATUS_INVALID_STATE in multiprotocol,
 *   if the requested railHandle is not active.
 *   Returns \ref RAIL_STATUS_INVALID_CALL if called on parts on which this function
 *   is not supported.
 *
 * When in receive, RSSI is sampled and if it exceeds the threshold,
 * \ref RAIL_EVENT_DETECT_RSSI_THRESHOLD is triggered.
 *
 * @note: If the radio is idled or this function is called with rssiThresholdDbm as
 *   \ref RAIL_RSSI_INVALID_DBM while RSSI detect is still in effect, a
 *   \ref RAIL_EVENT_DETECT_RSSI_THRESHOLD may not occur and the detection is disabled.
 *   If the RSSI is already above threshold when this function is called then
 *   \ref RAIL_EVENT_DETECT_RSSI_THRESHOLD will occur.
 *   Once the RSSI goes over the configured threshold and
 *   \ref RAIL_EVENT_DETECT_RSSI_THRESHOLD occurs, this function needs to be
 *   called again to reactivate the RSSI threshold detection.
 *
 * This function is only available on EFR32 Series 2 Sub-GHz parts EFR32xG23 and EFR32xG25.
 */
RAIL_Status_t RAIL_SetRssiDetectThreshold(RAIL_Handle_t railHandle,
                                          int8_t rssiThresholdDbm);

/**
 * Get the RSSI detection threshold in dBm.
 *
 * @param[in] railHandle a RAIL instance handle.
 * @return The RSSI threshold in dBm corresponding to the railHandle.
 *
 * @note: The function returns \ref RAIL_RSSI_INVALID_DBM when
 *   \ref RAIL_SetRssiDetectThreshold() is not supported or disabled.
 *   In multiprotocol, the function returns \ref RAIL_RSSI_INVALID_DBM if railHandle
 *   is not active.
 *
 * This function is only available on EFR32 Series 2 Sub-GHz parts EFR32xG23 and EFR32xG25.
 */
int8_t RAIL_GetRssiDetectThreshold(RAIL_Handle_t railHandle);

/**
 * Return the RSSI associated with the incoming packet.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @return The RSSI on the incoming packet in dBm,
 *   or \ref RAIL_RSSI_INVALID_DBM if not available.
 *
 * This function can only be called from callback context, e.g.,
 * when handling \ref RAIL_EVENT_RX_FILTER_PASSED or
 * \ref RAIL_EVENT_IEEE802154_DATA_REQUEST_COMMAND.
 */
int8_t RAIL_GetRxIncomingPacketRssi(RAIL_Handle_t railHandle);

/**
 * Set up a callback function capable of converting a RX packet's LQI value
 * before being consumed by application code.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in] cb A callback of type \ref RAIL_ConvertLqiCallback_t that is
 *   called before the RX packet LQI value is loaded into the \ref
 *   RAIL_RxPacketDetails_t structure for application consumption.
 * @return Status code indicating success of the function call.
 */
RAIL_Status_t RAIL_ConvertLqi(RAIL_Handle_t railHandle,
                              RAIL_ConvertLqiCallback_t cb);

/******************************************************************************
 * Address Filtering (RX)
 *****************************************************************************/
/**
 * @addtogroup Address_Filtering Address Filtering
 * @brief Configuration APIs for receive packet address filtering.
 *
 * The address filtering code examines the packet as follows.
 *
 * | `Bytes: 0 - 255` |  `0 - 8`  | `0 - 255` |  `0 - 8`  | `Variable` |
 * |:----------------:|----------:|----------:|----------:|:----------:|
 * | `Data_0`         | `Field_0` | `Data_1`  | `Field_1` | `Data_2`   |
 *
 * In the above structure, anything listed as Data_# is an optional section of
 * bytes that RAIL will not process for address filtering. The Field_# segments
 * reference specific sections in the packet that will each be interpreted
 * as an address during address filtering. The application may submit up to
 * four addresses to attempt to match each field segment and each address may
 * have a size of up to 8 bytes. To set up address filtering, first configure
 * the locations and length of the addresses in the packet. Next, configure
 * which combinations of matches in Field_0 and Field_1 should constitute an
 * address match. Last, enter addresses into tables for each field and
 * enable them. The first two of these are part of the \ref RAIL_AddrConfig_t
 * structure while the second part is configured at runtime using the
 * \ref RAIL_SetAddressFilterAddress() API. A brief description of each
 * configuration is listed below.
 *
 * The offsets and sizes of the fields
 * are assumed fixed for the RAIL address filter. To set them, specify
 * arrays for these values in the sizes and offsets entries in the
 * \ref RAIL_AddrConfig_t structure. A size of zero indicates that a field is
 * disabled. The start offset for a field is relative to the previous start
 * offset and, if you're using frame type decoding, the first start offset is
 * relative to the end of the byte containing the frame type.
 *
 * Configuring which combinations of Field_0 and Field_1 constitute a match is
 * the most complex portion of the address filter. The easiest way to think
 * about this is with a truth table. If you consider each of the four possible
 * address entries in a field, you can have a match on any one of those or a
 * match for none of them. This is shown in the 5x5 truth table below where
 * Field_0 matches are the rows and Field_1 matches are the columns.
 *
 * |                | No Match | Address 0 | Address 1 | Address 2 | Address 3 |
 * |----------------|----------|-----------|-----------|-----------|-----------|
 * | __No Match__   | bit 0    | bit 1     | bit 2     | bit 3     | bit 4     |
 * | __Address 0__  | bit 5    | bit 6     | bit 7     | bit 8     | bit 9     |
 * | __Address 1__  | bit 10   | bit 11    | bit 12    | bit 13    | bit 14    |
 * | __Address 2__  | bit 15   | bit 16    | bit 17    | bit 18    | bit 19    |
 * | __Address 3__  | bit 20   | bit 21    | bit 22    | bit 23    | bit 24    |
 *
 * Because this is only 25 bits, it can be represented in one 32-bit integer
 * where 1 indicates a filter pass and 0 indicates a filter fail. This is the
 * \ref RAIL_AddrConfig_t::matchTable field and is used during
 * filtering. For common simple configurations, two defines are provided with
 * the truth tables as shown below. The first is \ref
 * ADDRCONFIG_MATCH_TABLE_SINGLE_FIELD, which can be used if only using
 * one address field (either field). If using two fields and want to
 * force in the same address entry in each field, use the second define: \ref
 * ADDRCONFIG_MATCH_TABLE_DOUBLE_FIELD. For more complex systems,
 * create a valid custom table.
 *
 * @note Address filtering does not function reliably with PHYs that use a data
 *   rate greater than 500 kbps. If this is a requirement, filtering must
 *   currently be done by the application.
 *
 * @{
 */

/**
 * Configure address filtering.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in] addrConfig A pointer to the configuration structure, which defines how
 *   addresses are set up in your packets. May be NULL to reset address filtering.
 * @return Status code indicating success of the function call.
 *
 * You must call this function to set up address filtering. You may call it
 * multiple times but all previous information is wiped out each time you call
 * and any configured addresses must be reset.
 */
RAIL_Status_t RAIL_ConfigAddressFilter(RAIL_Handle_t railHandle,
                                       const RAIL_AddrConfig_t *addrConfig);

/**
 * Enable address filtering.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in] enable An argument to indicate whether or not to enable address
 *   filtering.
 * @return true if address filtering was enabled to start with and false
 *   otherwise.
 *
 * Only allow packets through that pass the current address filtering
 * configuration. This does not reset or change the configuration so you can
 * set that up before turning on this feature.
 */
bool RAIL_EnableAddressFilter(RAIL_Handle_t railHandle, bool enable);

/**
 * Return whether address filtering is currently enabled.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @return true if address filtering is enabled and false otherwise.
 */
bool RAIL_IsAddressFilterEnabled(RAIL_Handle_t railHandle);

/**
 * Reset the address filtering configuration.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @return Status code indicating success of the function call.
 *
 * Resets all structures related to address filtering. This does not disable
 * address filtering. It leaves the radio in a state where no packets
 * pass filtering.
 */
RAIL_Status_t RAIL_ResetAddressFilter(RAIL_Handle_t railHandle);

/**
 * Set an address for filtering in hardware.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in] field Indicates an address field for this address.
 * @param[in] index Indicates a match entry for this address for a
 *   given field.
 * @param[in] value A pointer to the address data. This must be at least as
 *   long as the size specified in \ref RAIL_ConfigAddressFilter(). The first byte,
 *   value[0], will be compared to the first byte received over the air for this
 *   address field.
 * @param[in] enable A boolean to indicate whether this address should be
 *   enabled immediately.
 * @return Status code indicating success of the function call.
 *
 * This function loads the given address into hardware for filtering and
 * starts filtering if you set the enable parameter to true. Otherwise,
 * call \ref RAIL_EnableAddressFilterAddress() to turn it on later.
 */
RAIL_Status_t RAIL_SetAddressFilterAddress(RAIL_Handle_t railHandle,
                                           uint8_t field,
                                           uint8_t index,
                                           const uint8_t *value,
                                           bool enable);

/**
 * Set an address bit mask for filtering in hardware.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in] field Indicates an address field for this address bit mask.
 * @param[in] bitMask A pointer to the address bitmask. This must be at least
 *   as long as the size specified in \ref RAIL_ConfigAddressFilter(). The first
 *   byte, bitMask[0], will be applied to the first byte received over the air
 *   for this address field. Bits set to 1 in the bit mask indicate which bit
 *   positions in the incoming packet to compare against the stored addresses
 *   during address filtering. Bits set to 0 indicate which bit positions to
 *   ignore in the incoming packet during address filtering. This bit mask is
 *   applied to all address entries.
 * @return Status code indicating success of the function call.
 *
 * This function loads the given address bit mask into hardware for use when
 * address filtering is enabled. All bits in the stored address bit mask are
 * set to 1 during hardware initialization and when either \ref
 * RAIL_ConfigAddressFilter() or \ref RAIL_ResetAddressFilter() are called.
 *
 * @note This feature/API is not supported on the EFR32xG21.
 *   Use the compile time symbol \ref
 *   RAIL_SUPPORTS_ADDR_FILTER_ADDRESS_BIT_MASK or the runtime call \ref
 *   RAIL_SupportsAddrFilterAddressBitMask() to check whether the platform
 *   supports this feature.
 */
RAIL_Status_t RAIL_SetAddressFilterAddressMask(RAIL_Handle_t railHandle,
                                               uint8_t field,
                                               const uint8_t *bitMask);

/**
 * Enable address filtering for the specified address.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in] enable An argument to indicate whether or not to enable address
 *   filtering.
 * @param[in] field Indicates an address for the address.
 * @param[in] index Indicates a match entry in the given field you want to enable.
 * @return Status code indicating success of the function call.
 */
RAIL_Status_t RAIL_EnableAddressFilterAddress(RAIL_Handle_t railHandle,
                                              bool enable,
                                              uint8_t field,
                                              uint8_t index);

/** @} */ // end of group Address_Filtering

/** @} */ // end of group Receive

/******************************************************************************
 * Auto-Acking
 *****************************************************************************/
/// @addtogroup Auto_Ack Auto-Ack
/// @brief APIs for configuring Auto-Ack functionality
///
/// These APIs configure the radio for automatic acknowledgment
/// features. Auto-Ack inherently changes how the underlying state machine
/// behaves so users should not modify \ref RAIL_SetRxTransitions() and
/// \ref RAIL_SetTxTransitions() while using Auto-Ack features.
/// @code{.c}
/// // Go to RX after Ack operation.
/// RAIL_AutoAckConfig_t autoAckConfig = {
///   .enable = true,
///   .ackTimeout = 1000,
///   .rxTransitions = {
///      .success = RAIL_RF_STATE_RX,
///      .error   = RAIL_RF_STATE_RX
///   },
///   .txTransitions = {
///      .success = RAIL_RF_STATE_RX,
///      .error   = RAIL_RF_STATE_RX,
///   },
/// };
///
/// RAIL_Status_t status = RAIL_ConfigAutoAck(railHandle, &autoAckConfig);
///
/// uint8_t ackData[] = {0x05, 0x02, 0x10, 0x00};
///
/// RAIL_Status_t status = RAIL_WriteAutoAckFifo(railHandle,
///                                              ackData,
///                                              sizeof(ackData));
/// @endcode
///
/// The acknowledgment transmits based on the frame format configured via
/// the Radio Configurator. For example, if the frame format is using a variable
/// length scheme, the Ack will be sent according to that scheme. If a 10-byte
/// packet is loaded into the Ack, but the variable length field of the Ack
/// payload specifies a length of 5, only 5 bytes will transmit for the Ack.
/// The converse is also true, if the frame length is configured to be a fixed
/// 10-byte packet but only 5 bytes are loaded into the Ack buffer, a TX
/// underflow occurs during the Ack transmit.
///
/// Unlike in non-Auto-Ack mode, Auto-Ack mode will always return to a single
/// state after all Ack sequences complete, regardless of whether
/// the Ack was successfully received/sent or not. See the documentation
/// of \ref RAIL_ConfigAutoAck() for configuration information. To
/// suspend automatic acknowledgment of a series of packets after transmit
/// or receive call \ref RAIL_PauseTxAutoAck() or \ref RAIL_PauseRxAutoAck() respectively
/// with the pause parameter set to true. When Auto-Acking is paused, after
/// receiving or transmitting a packet (regardless of success), the radio
/// transitions to the same state it would use while Acking. To return to
/// normal state transition logic outside of Acking, call \ref
/// RAIL_ConfigAutoAck() with the \ref RAIL_AutoAckConfig_t::enable field false
/// and specify the desired transitions in the \ref
/// RAIL_AutoAckConfig_t::rxTransitions and RAIL_AutoAckConfig_t::txTransitions
/// fields. To get out of a paused state and resume Auto-Acking, call \ref
/// RAIL_PauseTxAutoAck() and/or \ref RAIL_PauseRxAutoAck() with the pause parameter
/// set to false.
///
/// Applications can cancel the transmission of an Ack with \ref
/// RAIL_CancelAutoAck(). Conversely, applications can control if a transmit
/// operation should wait for an Ack after transmitting by using
/// the \ref RAIL_TX_OPTION_WAIT_FOR_ACK option.
///
/// When \ref Antenna_Control is used for multiple antennas, Acks are
/// transmitted on the antenna that was selected to receive the packet
/// being acknowledged. When receiving an Ack, the
/// \ref RAIL_RxOptions_t antenna options are used just like for any other
/// receive.
///
/// If the Ack payload is dynamic, the application must call \ref
/// RAIL_WriteAutoAckFifo() with the appropriate Ack payload after the
/// application processes the receive. RAIL can Auto-Ack from the normal
/// transmit buffer if \ref RAIL_UseTxFifoForAutoAck() is called before the radio
/// transmits the Ack. Ensure the transmit buffer contains data loaded by \ref
/// RAIL_WriteTxFifo().
///
/// Standard-based protocols that contain Auto-Ack functionality are normally
/// configured in the protocol-specific configuration function. For example,
/// \ref RAIL_IEEE802154_Init() provides Auto-Ack configuration parameters in \ref
/// RAIL_IEEE802154_Config_t and should only be configured through that
/// function. It is not advisable to call both \ref RAIL_IEEE802154_Init() and \ref
/// RAIL_ConfigAutoAck(). However, Ack modification functions are still valid to
/// use with protocol-specific Acks. To cancel an IEEE 802.15.4 Ack transmit,
/// use \ref RAIL_CancelAutoAck().
///
/// @{

/// Configure and enable automatic acknowledgment.
///
/// @param[in] railHandle A RAIL instance handle.
/// @param[in] config A pointer to an Auto-Ack configuration structure.
/// @return Status code indicating success of the function call.
///
/// Configures the RAIL state machine for hardware-accelerated automatic
/// acknowledgment. Ack timing parameters are defined in the configuration
/// structure.
///
/// While Auto-Acking is enabled, do not call the following RAIL functions:
///   - \ref RAIL_SetRxTransitions()
///   - \ref RAIL_SetTxTransitions()
///
/// When Auto-Acking is enabled, only one state transition can be defined
/// (without notion of success or error).
/// Thus if you are enabling Auto-Ack (i.e., config->enable field is true)
/// the "error" states of config->rxTransitions and config->txTransitions are ignored.
/// After all Ack sequences, (success or fail) the state machine will return
/// the radio to the "success" state, which can be either
/// \ref RAIL_RF_STATE_RX or \ref RAIL_RF_STATE_IDLE (returning to
/// \ref RAIL_RF_STATE_TX is not supported).
/// Alternatively when Auto-Acking is disabled (i.e., config->enable field is
/// false), transitions are reconfigured using all fields of config->rxTransitions
/// and config->txTransitions. When disabling, the "ackTimeout" field isn't used.
///
/// If you need information about the
/// actual success of the Ack sequence, use RAIL events such as
/// \ref RAIL_EVENT_TXACK_PACKET_SENT to make sure an Ack was sent, or
/// \ref RAIL_EVENT_RX_ACK_TIMEOUT to make sure that an Ack was received
/// within the specified timeout.
///
/// To set a certain turnaround time (i.e., txToRx and rxToTx
/// in \ref RAIL_StateTiming_t), make txToRx lower than
/// desired to ensure you get to RX in time to receive the Ack.
/// Silicon Labs recommends setting 10 us lower than desired:
/// @code{.c}
/// void setAutoAckStateTimings(void)
/// {
///   RAIL_StateTiming_t timings;
///
///   // User is already in Auto-Ack and wants a turnaround of 192 us.
///   timings.rxToTx = 192;
///   timings.txToRx = 192 - 10;
///
///   // Set other fields of timings...
///   timings.idleToRx = 100;
///   timings.idleToTx = 100;
///   timings.rxSearchTimeout = 0;
///   timings.txToRxSearchTimeout = 0;
///
///   RAIL_SetStateTiming(railHandle, &timings);
/// }
/// @endcode
///
/// @note Auto-Acking may not be enabled while RX Channel Hopping is enabled,
///   or when BLE is enabled.
///
RAIL_Status_t RAIL_ConfigAutoAck(RAIL_Handle_t railHandle,
                                 const RAIL_AutoAckConfig_t *config);

/**
 * Return the enable status of the Auto-Ack feature.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @return true if Auto-Ack is enabled, false if disabled.
 */
bool RAIL_IsAutoAckEnabled(RAIL_Handle_t railHandle);

/**
 * Load the Auto-Ack buffer with Ack data.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in] ackData A pointer to Ack data to transmit.
 *   This may be NULL, in which case it's assumed the data has already
 *   been emplaced into the Ack buffer and RAIL just needs to be told
 *   how many bytes are there. Use \ref RAIL_GetAutoAckFifo() to get
 *   the address of RAIL's Auto-Ack buffer in RAM and its size.
 * @param[in] ackDataLen The number of bytes in Ack data.
 * @return Status code indicating success of the function call.
 *
 * If the Ack buffer is available for updates, load the Ack buffer with data.
 * If it is not available, \ref RAIL_STATUS_INVALID_STATE is returned.
 * If ackDataLen exceeds \ref RAIL_AUTOACK_MAX_LENGTH then
 * \ref RAIL_STATUS_INVALID_PARAMETER will be returned and nothing is
 * written to the Ack buffer (unless ackData is NULL in which case this
 * indicates the application has already likely corrupted RAM).
 */
RAIL_Status_t RAIL_WriteAutoAckFifo(RAIL_Handle_t railHandle,
                                    const uint8_t *ackData,
                                    uint16_t ackDataLen);

/**
 * Get the address and size of the Auto-Ack transmit buffer for direct access.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in,out] ackBuffer A pointer to a uint8_t pointer that will be
 *   updated to the RAM base address of the Auto-Ack FIFO buffer.
 * @param[in,out] ackBufferBytes A pointer to a uint16_t that will be
 *   updated to the size of the Auto-Ack FIFO buffer, in bytes,
 *   currently \ref RAIL_AUTOACK_MAX_LENGTH.
 * @return Status code indicating success of the function call.
 *
 * Applications can use this to more flexibly write Auto-Ack data into
 * the buffer directly and in pieces, passing NULL ackData parameter to
 * \ref RAIL_WriteAutoAckFifo() or \ref RAIL_IEEE802154_WriteEnhAck()
 * to inform RAIL of its final length.
 */
RAIL_Status_t RAIL_GetAutoAckFifo(RAIL_Handle_t railHandle,
                                  uint8_t **ackBuffer,
                                  uint16_t *ackBufferBytes);

/**
 * Pause/resume RX Auto-Ack functionality.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in] pause Pause or resume RX Auto-Acking.
 * @return Status code indicating success of the function call.
 *
 * When RX Auto-Acking is paused, the radio transitions to
 * \ref RAIL_AutoAckConfig_t::rxTransitions's
 * \ref RAIL_StateTransitions_t::success state after receiving a packet and
 * does not transmit an Ack. When RX Auto-Ack is resumed, the radio resumes
 * automatically Acking every successfully received packet.
 */
RAIL_Status_t RAIL_PauseRxAutoAck(RAIL_Handle_t railHandle,
                                  bool pause);

/**
 * Return whether the RX Auto-Ack is paused.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @return true if RX Auto-Ack is paused, false if not paused.
 */
bool RAIL_IsRxAutoAckPaused(RAIL_Handle_t railHandle);

/**
 * Pause/resume TX Auto-Ack functionality.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in] pause Pause or resume TX Auto-Acking.
 * @return Status code indicating success of the function call.
 *
 * When TX Auto-Acking is paused, the radio transitions to
 * \ref RAIL_AutoAckConfig_t::txTransitions's
 * \ref RAIL_StateTransitions_t::success state after transmitting a packet and
 * does not wait for an Ack. When TX Auto-Ack is resumed, the radio resumes
 * automatically waiting for an Ack after a successful transmit.
 */
RAIL_Status_t RAIL_PauseTxAutoAck(RAIL_Handle_t railHandle, bool pause);

/**
 * Return whether the TX Auto-Ack is paused.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @return true if TX Auto-Ack is paused, false if not paused.
 */
bool RAIL_IsTxAutoAckPaused(RAIL_Handle_t railHandle);

/**
 * Modify the upcoming Ack to use the transmit FIFO.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @return Status code indicating success of the function call. The call will
 *   fail if it is too late to modify the outgoing Ack.
 *
 * This function allows the application to use the normal transmit FIFO as
 * the data source for the upcoming Ack. The Ack modification to use the
 * transmit FIFO only applies to one Ack transmission.
 *
 * This function only returns true if the following conditions are met:
 *   - Radio has not already decided to use the Ack buffer AND
 *   - Radio is either looking for sync, receiving the packet after sync, or in
 *     the \ref RAIL_StateTiming_t::rxToTx turnaround before the Ack is sent.
 *
 * @note The transmit FIFO must not be used for Auto-Ack when IEEE 802.15.4,
 *   Z-Wave, or BLE protocols are active.
 */
RAIL_Status_t RAIL_UseTxFifoForAutoAck(RAIL_Handle_t railHandle);

/**
 * Cancel the upcoming Ack.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @return Status code indicating success of the function call. This call will
 *   fail if it is too late to modify the outgoing Ack.
 *
 * This function allows the application to cancel the upcoming automatic
 * acknowledgment.
 *
 * This function only returns true if the following conditions are met:
 *   - Radio has not already decided to transmit the Ack, and
 *   - Radio is either looking for sync, receiving the packet after sync or in
 *     the \ref RAIL_StateTiming_t::rxToTx turnaround before the Ack is sent.
 */
RAIL_Status_t RAIL_CancelAutoAck(RAIL_Handle_t railHandle);

/**
 * Return whether the radio is currently waiting for an Ack.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @return true if radio is waiting for Ack, false if radio is not waiting for
 *   an Ack.
 *
 * This function allows the application to query whether the radio is currently
 * waiting for an Ack after a transmit operation.
 */
bool RAIL_IsAutoAckWaitingForAck(RAIL_Handle_t railHandle);

/** @} */ // end of group Auto_Ack

/******************************************************************************
 * Calibration
 *****************************************************************************/
/// @addtogroup Calibration
/// @brief APIs for calibrating the radio
/// @{
///
/// These APIs calibrate the radio. The RAIL library
/// determines which calibrations are necessary. Calibrations can
/// be enabled/disabled with the \ref RAIL_CalMask_t parameter.
///
/// Some calibrations produce values that can be saved and reapplied to
/// avoid repeating the calibration process.
///
/// Calibrations can either be run with \ref RAIL_Calibrate(), or with the
/// individual chip-specific calibration routines. An example for running code
/// with \ref RAIL_Calibrate() looks like the following:
/// @code{.c}
/// static RAIL_CalValues_t calValues = RAIL_CALVALUES_UNINIT;
/// static volatile bool calibrateRadio = false;
///
/// void RAILCb_Event(RAIL_Handle_t railHandle, RAIL_Events_t events)
/// {
///   // Omitting other event handlers
///   if (events & RAIL_EVENT_CAL_NEEDED) {
///     calibrateRadio = true;
///   }
/// }
///
/// void main(void)
/// {
///   // Initialize RAIL ...
///
///   // Application main loop
///   while (1) {
///     ...
///     if (calibrateRadio) {
///       // Run all pending calibrations, and save the results
///       RAIL_Calibrate(railHandle, &calValues, RAIL_CAL_ALL_PENDING);
///       calibrateRadio = false;
///     }
///     ...
///   }
/// }
/// @endcode
///
/// Alternatively, if the image rejection calibration for your radio can be
/// determined ahead of time, such as by running the calibration on a separate
/// firmware image on each chip, the following calibration process will
/// result in smaller code.
/// @code{.c}
/// static RAIL_IrCalValues_t irCalValues = {
///   .rxIrCalValues = {
///     RX_IRCAL_VALUE_RF_PATH0,
///     RX_IRCAL_VALUE_RF_PATH1,
///   },
///   .txIrCalValues = {
///     .dcOffsetIQ = TX_IRCAL_DC_OFFSET_IQ,
///     .phiEpsilon = TX_IRCAL_PHI_EPSILON,
///   },
/// };
///
/// void RAILCb_Event(RAIL_Handle_t railHandle, RAIL_Events_t events)
/// {
///   // Omitting other event handlers
///   if (events & RAIL_EVENT_CAL_NEEDED) {
///     RAIL_CalMask_t pendingCals = RAIL_GetPendingCal(railHandle);
///     // Disable the radio if we have to do an offline calibration
///     if (pendingCals & RAIL_CAL_TEMP_VC0) {
///       (void) RAIL_CalibrateTemp(railHandle);
///     }
///     if (pendingCals & RAIL_CAL_ONETIME_IRCAL) {
///       (void) RAIL_ApplyIrCalibrationAlt(rail_handle, &ir_cal_values, RAIL_ANTENNA_AUTO);
///     }
///   }
/// }
/// @endcode

/**
 * Initialize RAIL calibration.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in] calEnable A bitmask that indicates which calibrations
 *   to enable for a callback notification.
 *   The exact meaning of these bits is radio-specific.
 * @return Status code indicating success of the function call.
 *
 * Calibration initialization provides the calibration settings that
 * correspond to the current radio configuration.
 */
RAIL_Status_t RAIL_ConfigCal(RAIL_Handle_t railHandle,
                             RAIL_CalMask_t calEnable);

/**
 * Start the calibration process.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in,out] calValues A pointer to a structure of calibration values to apply.
 *   If a valid calibration structure is provided and the structure
 *   contains valid calibration values, those values will be applied to the
 *   hardware and the RAIL library will cache those values for use again later.
 *   If a valid calibration structure is provided and the structure
 *   contains a calibration value of \ref RAIL_CAL_INVALID_VALUE for the
 *   desired calibration, the desired calibration will run, the calibration
 *   values structure will be updated with a valid calibration value, and the
 *   RAIL library will cache that value for use again later.
 *   If a NULL pointer is provided, the desired calibration will run
 *   and the RAIL library will cache that value for use again later. However,
 *   the valid calibration value will not be returned to the application.
 * @param[in] calForce A mask to force specific calibration(s) to execute.
 *   To run all pending calibrations, use the value \ref RAIL_CAL_ALL_PENDING.
 *   Only the calibrations specified will run, even if not enabled during
 *   initialization.
 * @return Status code indicating success of the function call.
 *
 * If calibrations were performed previously and the application saves the
 * calibration values (i.e., call this function with a calibration values
 * structure containing calibration values of \ref RAIL_CAL_INVALID_VALUE
 * before a reset), the application can later bypass the time it would normally
 * take to recalibrate hardware by reusing previous calibration values (i.e.,
 * call this function with a calibration values structure containing valid
 * calibration values after a reset).
 *
 * Silicon Labs recommends calling this function from the application main loop.
 *
 * If multiple protocols are used, this function will make the given railHandle
 * active, if not already, and perform calibration. If called during a protocol
 * switch, to perform an IR calibration for the first time, it will
 * return \ref RAIL_STATUS_INVALID_STATE, in which case the application must
 * defer calibration until after the protocol switch is complete.
 *
 * @note Instead of this function, consider using the individual calibration-specific
 *   functions. Using the individual functions will allow for better
 *   dead-stripping if not all calibrations are run.
 * @note Some calibrations should only be executed when the radio is IDLE. See
 *   chip-specific documentation for more details.
 */
RAIL_Status_t RAIL_Calibrate(RAIL_Handle_t railHandle,
                             RAIL_CalValues_t *calValues,
                             RAIL_CalMask_t calForce);

/**
 * Return the current set of pending calibrations.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @return A mask of all pending calibrations that the user has been asked to
 *   perform.
 *
 * This function returns a full set of pending calibrations. The only way
 * to clear pending calibrations is to perform them using the \ref
 * RAIL_Calibrate() API with the appropriate list of calibrations.
 */
RAIL_CalMask_t RAIL_GetPendingCal(RAIL_Handle_t railHandle);

/**
 * Apply a given image rejection calibration value.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in] imageRejection The image rejection value to apply.
 * @return Status code indicating success of the function call.
 *
 * Take an image rejection calibration value and apply it. This value should be
 * determined from a previous run of \ref RAIL_CalibrateIr on the same
 * physical device with the same radio configuration. The imageRejection value
 * will also be stored to the \ref RAIL_ChannelConfigEntry_t::attr, if possible.
 *
 * If multiple protocols are used, this function will return
 * \ref RAIL_STATUS_INVALID_STATE if it is called and the given railHandle is
 * not active. In that case, the caller must attempt to re-call this function later.
 *
 * @deprecated Please use \ref RAIL_ApplyIrCalibrationAlt instead.
 */
RAIL_Status_t RAIL_ApplyIrCalibration(RAIL_Handle_t railHandle,
                                      uint32_t imageRejection);

/**
 * Apply given image rejection calibration values.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in] imageRejection A pointer to the image rejection values to apply.
 * @param[in] rfPath RF path(s) to calibrate.
 * @return Status code indicating success of the function call.
 *
 * Take image rejection calibration values and apply them. These values should be
 * determined from a previous run of \ref RAIL_CalibrateIrAlt() on the same
 * physical device with the same radio configuration. The imageRejection values
 * will also be stored to the \ref RAIL_ChannelConfigEntry_t::attr, if possible.
 *
 * @note: To make sure the imageRejection values are stored/configured correctly,
 *   \ref RAIL_ConfigAntenna() should be called before calling this API.
 *
 * If multiple protocols are used, this function will return
 * \ref RAIL_STATUS_INVALID_STATE if it is called and the given railHandle is
 * not active. In that case, the caller must attempt to re-call this function later.
 */
RAIL_Status_t RAIL_ApplyIrCalibrationAlt(RAIL_Handle_t railHandle,
                                         RAIL_IrCalValues_t *imageRejection,
                                         RAIL_AntennaSel_t rfPath);

/**
 * Run the image rejection calibration.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[out] imageRejection The result of the image rejection calibration.
 * @return Status code indicating success of the function call.
 *
 * Run the image rejection calibration and apply the resulting value. If the
 * imageRejection parameter is not NULL, store the value at that
 * location. The imageRejection value will also be stored to the
 * \ref RAIL_ChannelConfigEntry_t::attr, if possible. This is a long-running
 * calibration that adds significant code space when run and can be run with a
 * separate firmware image on each device to save code space in the
 * final image. Silicon Labs recommends calling this function from the
 * application main loop.
 *
 * If multiple protocols are used, this function will make the given railHandle
 * active, if not already, and perform calibration. If called during a protocol
 * switch, it will return \ref RAIL_STATUS_INVALID_STATE. In this case,
 * \ref RAIL_ApplyIrCalibration may be called to apply a previously determined
 * IR calibration value, or the app must defer calibration until the
 * protocol switch is complete.
 *
 * @deprecated Please use \ref RAIL_CalibrateIrAlt instead.
 */
RAIL_Status_t RAIL_CalibrateIr(RAIL_Handle_t railHandle,
                               uint32_t *imageRejection);

/**
 * Run the image rejection calibration.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[out] imageRejection A pointer to the image rejection results.
 * @param[in] rfPath RF path(s) to calibrate.
 * @return Status code indicating success of the function call.
 *
 * Run the image rejection calibration and apply the resulting values. If the
 * imageRejection parameter is not NULL, store the values at that
 * location. The imageRejection values will also be stored to the
 * \ref RAIL_ChannelConfigEntry_t::attr, if possible. This is a long-running
 * calibration that adds significant code space when run and can be run with a
 * separate firmware image on each device to save code space in the
 * final image. Silicon Labs recommends calling this function from the
 * application main loop.
 *
 * @note: To make sure the imageRejection values are stored/configured correctly,
 *   \ref RAIL_ConfigAntenna() should be called before calling this API.
 *
 * If multiple protocols are used, this function will return
 * \ref RAIL_STATUS_INVALID_STATE if it is called and the given railHandle is
 * not active. In that case, the caller must attempt to re-call this function later.
 */
RAIL_Status_t RAIL_CalibrateIrAlt(RAIL_Handle_t railHandle,
                                  RAIL_IrCalValues_t *imageRejection,
                                  RAIL_AntennaSel_t rfPath);

/**
 * Run the temperature calibration.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @return Status code indicating success of the function call.
 *
 * Run the temperature calibration, which needs to recalibrate the synth if
 * the temperature crosses 0C or the temperature delta since the last
 * calibration exceeds 70C while in receive. RAIL will run the VCO calibration
 * automatically upon entering receive or transmit states, so the application
 * can omit this calibration if the stack re-enters receive or transmit with
 * enough frequency to avoid reaching the temperature delta. If the application
 * does not calibrate for temperature, it's possible to miss receive packets due
 * to a drift in the carrier frequency.
 *
 * If multiple protocols are used, this function will return
 * \ref RAIL_STATUS_INVALID_STATE if it is called and the given railHandle is
 * not active. In that case, the calibration will be automatically performed
 * next time the radio enters receive.
 *
 * @note If RX channel hopping is enabled this function may trigger a
 *   channel hop, which can result in \ref
 *   RAIL_EVENT_RX_CHANNEL_HOPPING_COMPLETE occuring before it returns.
 */
RAIL_Status_t RAIL_CalibrateTemp(RAIL_Handle_t railHandle);

/**
 * Performs HFXO compensation.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[out] crystalPPMError A pointer for RAIL to store the current
 *   deviation that has been corrected, measured in PPM. May be NULL.
 * @return Status code indicating the result of the function call.
 *
 * Compute the PPM correction using the thermistor value available when
 * \ref RAIL_EVENT_THERMISTOR_DONE occurs, after
 * \ref RAIL_StartThermistorMeasurement() call.
 * Then correct the RF frequency as well as TX and RX sampling.
 *
 * This function calls the following RAIL functions in sequence saving having
 * to call them individually:
 *   - \ref RAIL_ConvertThermistorImpedance()
 *   - \ref RAIL_ComputeHFXOPPMError()
 *   - \ref RAIL_CompensateHFXO()
 *
 * @note This function makes the radio idle.
 */
RAIL_Status_t RAIL_CalibrateHFXO(RAIL_Handle_t railHandle, int8_t *crystalPPMError);

/**
 * Enable/disable the PA calibration.
 *
 * @param[in] enable Enables/disables the PA calibration.
 *
 * Enabling will ensure that the PA power remains constant chip-to-chip.
 * This feature is enabled by default on Series-2 platforms.
 *
 * On EFR32xG21 and EFR32xG24 platforms, particularly the 20 dBm variants,
 * it is recommended to keep this feature enabled in order to utilize the
 * chip-specific calibrations designated for the chip.
 *
 * The chip-specific define SL_RAIL_UTIL_PA_CALIBRATION_ENABLE in the
 * \ref rail_util_pa plugin also enables/disables PA calibrations
 * on initialization, which can override the default state of the feature.
 *
 * @note Call this function before \ref RAIL_ConfigTxPower() if this
 *   feature is not desired.
 */
void RAIL_EnablePaCal(bool enable);

/** @} */ // end of group Calibration

/******************************************************************************
 * RF Sense Structures
 *****************************************************************************/
/**
 * @addtogroup Rf_Sense RF Sense
 * @{
 */

/**
 * Start/stop the RF Sense functionality in Energy Detection Mode for use
 * during low-energy sleep modes.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in] band The frequency band(s) on which to sense the RF energy.
 *   To stop RF Sense, specify \ref RAIL_RFSENSE_OFF.
 * @param[in] senseTime The time (in microseconds) the RF energy must be
 *   continually detected to be considered "sensed".
 * @param[in] cb \ref RAIL_RfSense_CallbackPtr_t is called when the RF is
 *   sensed. Set NULL if using \ref RAIL_EVENT_RF_SENSED or polling via
 *   \ref RAIL_IsRfSensed().
 * @return The actual senseTime used, which may be different than
 *   requested due to limitations of the hardware. If 0, RF sense was
 *   disabled or could not be enabled (no callback or event will be issued).
 *
 * Some EFR32 radios have the ability to sense the presence of RF energy above -20 dBm
 * within either or both the 2.4 GHz and Sub-GHz bands and trigger an event
 * if that energy is continuously present for certain durations of time. An
 * application can check when RF energy is sensed either by enabling the event
 * \ref RAIL_EVENT_RF_SENSED, by polling on the \ref RAIL_IsRfSensed() API, or
 * by using the cb callback.
 *
 * @note After RF energy has been sensed, the RF Sense is automatically
 *   disabled and \ref RAIL_StartRfSense() must be called again to reactivate it.
 *   If RF energy has not been sensed and to manually disable RF Sense,
 *   \ref RAIL_StartRfSense() must be called with band specified as
 *   \ref RAIL_RFSENSE_OFF or with senseTime set to 0 microseconds.
 *
 * @note Packet reception is not guaranteed to work correctly once RF Sense is
 *   enabled, both in single protocol and multiprotocol RAIL.
 *   To be safe, an application should turn this on only after idling
 *   the radio to stop receive and turn it off before attempting to restart
 *   receive. Since EM4 sleep causes the chip to come up through the reset
 *   vector any wake from EM4 must also shut off RF Sense to ensure proper
 *   receive functionality.
 *
 * @warning For some radios, RF Sense functionality is only guaranteed within
 *   a specified temperature range.
 *   See chip-specific documentation for more details.
 */
RAIL_Time_t RAIL_StartRfSense(RAIL_Handle_t railHandle,
                              RAIL_RfSenseBand_t band,
                              RAIL_Time_t senseTime,
                              RAIL_RfSense_CallbackPtr_t cb);

/// Start/stop the RF Sense functionality in Selective(OOK Based) Mode for use
/// during low-energy sleep modes.
///
/// @param[in] railHandle A RAIL instance handle.
/// @param[in] config A pointer to a \ref RAIL_RfSenseSelectiveOokConfig_t
///   which holds the RFSENSE configuration for Selective(OOK) mode.
/// @return Status code indicating success of the function call.
///
/// Some radios support Selective RF energy detection (OOK mode) where the
/// user can program the radio to look for a particular sync word pattern
/// (1-4 bytes) sent using OOK and wake only when that is detected.
/// See chip-specific documentation for more details.
///
/// The following code gives an example of how to use RF Sense functionality
/// in Selective(OOK Based) Mode.
/// @code{.c}
/// // Sync word length in bytes, 1-4 bytes.
/// #define NUM_SYNC_WORD_BYTES (2U)
/// // Sync word value.
/// #define SYNC_WORD           (0xB16FU)
/// // Desired RF band
/// RAIL_RfSenseBand_t rfBand = RAIL_RFSENSE_2_4GHZ;
///
/// // Configure the transmitting node for sending the wakeup packet.
/// RAIL_Idle(railHandle, RAIL_IDLE_ABORT, true);
/// RAIL_ConfigRfSenseSelectiveOokWakeupPhy(railHandle);
/// RAIL_SetRfSenseSelectiveOokWakeupPayload(railHandle, NUM_SYNC_WORD_BYTES, SYNC_WORD);
/// RAIL_StartTx(railHandle, channel, RAIL_TX_OPTIONS_DEFAULT, NULL);
///
/// // Configure the receiving node (EFR32xG22) for RF Sense.
/// RAIL_RfSenseSelectiveOokConfig_t config = {
///  .band = rfBand,
///  .syncWordNumBytes = NUM_SYNC_WORD_BYTES,
///  .syncWord = SYNC_WORD,
///  .cb = NULL // Use RAIL_EVENT_RF_SENSED event or poll RAIL_IsRfSensed()
/// };
/// RAIL_StartSelectiveOokRfSense(railHandle, &config);
/// @endcode
///
/// @note After RF energy has been sensed, the RF Sense is automatically
///   disabled and \ref RAIL_StartSelectiveOokRfSense() must be called again to
///   reactivate. If RF energy has not been sensed and to manually disable
///   RF Sense, \ref RAIL_StartSelectiveOokRfSense() must be called with band
///   specified as \ref RAIL_RFSENSE_OFF or with
///   \ref RAIL_RfSenseSelectiveOokConfig_t as NULL.
///
/// @note Packet reception is not guaranteed to work correctly once RF Sense is
///   enabled, both in single protocol and multiprotocol RAIL.
///   To be safe, an application should turn this on only after idling
///   the radio to stop receive and turn it off before attempting to restart
///   receive. Since EM4 sleep causes the chip to come up through the reset
///   vector any wake from EM4 must also shut off RF Sense to ensure proper
///   receive functionality.
///
RAIL_Status_t RAIL_StartSelectiveOokRfSense(RAIL_Handle_t railHandle,
                                            RAIL_RfSenseSelectiveOokConfig_t *config);

/**
 * Switch to RF Sense Selective(OOK) PHY.
 *
 * @param[in] railHandle A handle for RAIL instance.
 * @return Status code indicating success of the function call.
 *
 * This function switches to the RFSENSE Selective(OOK) PHY for transmitting a
 * packet to wake up a chip that supports Selective RF energy detection (OOK
 * mode). You may only call this function while the radio is idle. While the
 * radio is configured for this PHY, receive functionality should not be used.
 *
 * @note The user must also set up the transmit FIFO, via
 *   \ref RAIL_SetRfSenseSelectiveOokWakeupPayload, post this function call to
 *   include the first byte as the Preamble byte, followed by the
 *   Sync word (1-4 bytes).
 *   See chip-specific documentation for more details.
 */
RAIL_Status_t RAIL_ConfigRfSenseSelectiveOokWakeupPhy(RAIL_Handle_t railHandle);

/**
 * Set the transmit payload for waking up a node configured for
 * RF Sense Selective(OOK).
 *
 * @param[in] railHandle A handle for RAIL instance.
 * @param[in] numSyncwordBytes Sync word length in bytes, 1-4 bytes.
 * @param[in] syncword Sync word value.
 * @return Status code indicating success of the function call.
 *
 * @note You must call this function after the chip has been set up with the
 *   RF Sense Selective(OOK) PHY, using \ref RAIL_ConfigRfSenseSelectiveOokWakeupPhy.
 */
RAIL_Status_t RAIL_SetRfSenseSelectiveOokWakeupPayload(RAIL_Handle_t railHandle,
                                                       uint8_t numSyncwordBytes,
                                                       uint32_t syncword);

/**
 * Check whether the RF was sensed.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @return true if RF was sensed since the last call to \ref RAIL_StartRfSense().
 *   false otherwise.
 *
 * This function is useful if \ref RAIL_StartRfSense() is called with a NULL
 * callback. It is generally used after EM4 reboot but can be used any time.
 */
bool RAIL_IsRfSensed(RAIL_Handle_t railHandle);

/** @} */ // end of group Rf_Sense

/******************************************************************************
 * RX Channel Hopping
 *****************************************************************************/
/**
 * @addtogroup Rx_Channel_Hopping RX Channel Hopping
 * @brief Hardware accelerated hopping between channels while waiting for a
 *   packet in receive.
 * @{
 *
 * Channel hopping provides a hardware accelerated method for
 * scanning across multiple channels quickly, as part of a receive protocol.
 * While it is possible to call \ref RAIL_StartRx() on different channels,
 * back to back, and listen on many channels sequentially in that way, the
 * time it takes to switch channels with that method may be too long for some
 * protocols. This API pre-computes necessary channel change operations
 * for a given list of channels, so that the radio can move from channel
 * to channel much faster. Additionally, it leads to more succinct code
 * as channel changes will be done implicitly, without requiring numerous calls
 * to \ref RAIL_StartRx(). Currently, while this feature is enabled, the radio
 * will hop channels in the given sequence each time it enters RX.
 * Note that RX Channel hopping and EFR32xG25's concurrent mode / collision
 * detection are mutually exclusive.
 *
 * The channel hopping buffer requires \ref RAIL_CHANNEL_HOPPING_BUFFER_SIZE_PER_CHANNEL
 * number of 32-bit words of overhead per channel, plus 3 words overall plus the
 * twice the size of the \ref RAIL_ChannelConfig_t::phyConfigDeltaSubtract
 * of the whole radio configuration, plus the twice the sum of the sizes of all
 * the \ref RAIL_ChannelConfigEntry_t::phyConfigDeltaAdd in all the channel
 * hopping channels.
 *
 * The following code gives an example of how to use
 * the RX Channel Hopping API.
 * @code{.c}
 * #define CHANNEL_HOPPING_NUMBER_OF_CHANNELS 4
 * #define CHANNEL_HOPPING_BUFFER_SIZE do {        \
 *   3 +                                           \
 *   (RAIL_CHANNEL_HOPPING_BUFFER_SIZE_PER_CHANNEL \
 *    * CHANNEL_HOPPING_NUMBER_OF_CHANNELS) +      \
 *   2 * (SIZEOF_UINT32_DELTA_SUBTRACT +           \
 *   SIZEOF_UINT32_DELTA_ADD_0 +                   \
 *   SIZEOF_UINT32_DELTA_ADD_1 +                   \
 *   SIZEOF_UINT32_DELTA_ADD_2 +                   \
 *   SIZEOF_UINT32_DELTA_ADD_3)                    \
 * } while (0)
 *
 * RAIL_RxChannelHoppingConfigEntry_t channelHoppingEntries[CHANNEL_HOPPING_NUMBER_OF_CHANNELS];
 * uint32_t channelHoppingBuffer[CHANNEL_HOPPING_BUFFER_SIZE];
 *
 * RAIL_RxChannelHoppingConfig_t channelHoppingConfig = {
 *   .buffer = channelHoppingBuffer,
 *   .bufferLength = CHANNEL_HOPPING_BUFFER_SIZE,
 *   .numberOfChannels = CHANNEL_HOPPING_NUMBER_OF_CHANNELS,
 *   .entries = channelHoppingEntries
 * };
 *
 * channelHoppingEntries[0].channel = 1;
 * channelHoppingEntries[1].channel = 2;
 * channelHoppingEntries[2].channel = 3;
 *
 * RAIL_ConfigRxChannelHopping(railHandle, &channelHoppingConfig);
 * RAIL_EnableRxChannelHopping(railHandle, true, true)
 * @endcode
 */

/**
 * Configure RX channel hopping.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in] config A pointer to the configuration parameters for RX Channel Hopping.
 * @return Status code indicating success of the function call.
 *
 * Configure channel hopping channels, conditions, and parameters. This
 * API must be called before \ref RAIL_EnableRxChannelHopping(). This API must
 * never be called while the radio is on with RX Duty Cycle or Channel
 * Hopping enabled.
 *
 * @note Use the compile time symbol \ref RAIL_SUPPORTS_CHANNEL_HOPPING or
 *   the runtime call \ref RAIL_SupportsChannelHopping() to check whether
 *   the platform supports this feature.
 *
 * @note Calling this function will overwrite any settings configured with
 *   \ref RAIL_ConfigRxDutyCycle().
 */
RAIL_Status_t RAIL_ConfigRxChannelHopping(RAIL_Handle_t railHandle,
                                          RAIL_RxChannelHoppingConfig_t *config);

/**
 * Enable RX channel hopping.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in] enable Enable (true) or disable (false) RX Channel Hopping.
 * @param[in] reset Start from the first channel of the channel hopping
 *   sequence (true) or from wherever hopping left off last time the code
 *   left RX.
 * @return Status code indicating success of the function call.
 *
 * Enable or disable Channel Hopping. Additionally, specify whether hopping
 * should be reset to start from the first channel index, or continue
 * from the channel last hopped to. The radio should not be on when
 * this API is called. \ref RAIL_ConfigRxChannelHopping() must be called
 * successfully before this API is called.
 *
 * @note Use the compile time symbol \ref RAIL_SUPPORTS_CHANNEL_HOPPING or
 *   the runtime call \ref RAIL_SupportsChannelHopping() to check whether
 *   the platform supports this feature.
 *
 * @note RX Channel Hopping may not be enabled while Auto-Acking is enabled.
 *
 * @note Calling this function will overwrite any settings configured with
 *   \ref RAIL_EnableRxDutyCycle().
 */
RAIL_Status_t RAIL_EnableRxChannelHopping(RAIL_Handle_t railHandle,
                                          bool enable,
                                          bool reset);

/**
 * Manually trigger an Rx channel hop.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @return Status code indicating success of the function call.
 *
 * This function facilitates a manual hop when using \ref
 * RAIL_RX_CHANNEL_HOPPING_MODE_MANUAL. (It will also trigger a hop
 * in other automatic hop modes as well, so use with caution.)
 *
 * @note This function may cause \ref RAIL_EVENT_RX_CHANNEL_HOPPING_COMPLETE
 *   to occur before it returns.
 */
RAIL_Status_t RAIL_TriggerRxChannelHop(RAIL_Handle_t railHandle);

/**
 * Get RSSI in deci-dBm of one channel in the channel hopping sequence, during
 * channel hopping.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in] channelIndex Index in the channel hopping sequence of the
 *   channel of interest.
 * @return Latest RSSI in deci-dBm for the channel at the specified index.
 *
 * @note Use the compile time symbol \ref RAIL_SUPPORTS_CHANNEL_HOPPING or
 *   the runtime call \ref RAIL_SupportsChannelHopping() to check whether
 *   the platform supports this feature.
 *
 * @note In multiprotocol, this function returns \ref RAIL_RSSI_INVALID
 *   immediately if railHandle is not the currently active \ref RAIL_Handle_t.
 *
 * @note \ref RAIL_ConfigRxChannelHopping() must be called successfully
 *   before this API is called.
 *
 * @note When the Z-Wave protocol is active, running
 *   \ref RAIL_GetChannelHoppingRssi() on the 9.6 kbps PHY returns the RSSI
 *   measurement of the 40kpbs PHY. This is because the 9.6 kbps PHY has
 *   trouble with RSSI measurements on EFR32xG2x family of chips.
 */
int16_t RAIL_GetChannelHoppingRssi(RAIL_Handle_t railHandle,
                                   uint8_t channelIndex);

/// Configure RX duty cycle mode.
///
/// @param[in] railHandle A RAIL instance handle.
/// @param[in] config A non-NULL pointer to a configuration structure specifying duty cycle parameters.
/// @return Status code indicating success of the function call.
///
/// Configure RX duty cycle mode. With this mode enabled, every time the radio
/// enters RX, it will duty cycle on and off to save power. The duty cycle
/// ratio can be altered dynamically and intelligently by the hardware by
/// staying on longer if a preamble or other packet segments are detected in
/// the air. This API must never be called while the radio is on with RX Duty
/// Cycle or Channel Hopping enabled.
/// For short delays (in the order of microseconds),
/// \ref RAIL_RxDutyCycleConfig_t::delay, this can be used to save receive
/// current while having little impact on the radio performance, for protocols
/// with long preambles. For long delays (in the order of milliseconds or higher)
/// the chip can be put into EM2 energy mode before re-entering RX,
/// to save extra power, with some application hooks as shown below.
///
/// @code{.c}
/// #include "rail.h"
///
/// extern RAIL_Handle_t railHandle;
/// RAIL_Time_t periodicWakeupUs;
///
/// volatile bool dutyCycleEnd = true;
///
/// void RAILCb_Event(RAIL_Handle_t railHandle, RAIL_Events_t events)
/// {
///   // Omitting other event handlers
///   if (events & RAIL_EVENT_RX_DUTY_CYCLE_RX_END) {
///     dutyCycleEnd = true;
///   }
/// }
///
/// void main(void)
/// {
///   RAIL_Status_t status;
///   bool shouldSleep = false;
///
///   initializeRail(); // Call RAIL_Init() and such
///
///   // This function depends on your board/chip but it must enable the LFCLK
///   // you intend to use for RTCC sync before we configure sleep as that
///   // function will attempt to auto detect the clock.
///   BoardSetupLFCLK();
///   // Initialize Power Manager module
///   sl_power_manager_init();
///   // Initialize RAIL Power Manager
///   RAIL_InitPowerManager();
///
///   // Configure sleep for timer synchronization
///   RAIL_TimerSyncConfig_t timerSyncConfig = RAIL_TIMER_SYNC_DEFAULT;
///   status = RAIL_ConfigSleep(railHandle, &timerSyncConfig);
///   assert(status == RAIL_STATUS_NO_ERROR);
///
///   // Configure RX duty-cycling
///   RAIL_RxDutyCycleConfig_t duty_cycle_config = {
///     .mode = RAIL_RX_CHANNEL_HOPPING_MODE_PREAMBLE_SENSE,
///     .parameter = DUTY_CYCLE_ON_TIME,
///     .delay_us = DUTY_CYCLE_OFF_TIME,
///     .delay_mode = RAIL_RX_CHANNEL_HOPPING_DELAY_MODE_STATIC,
///     .options = RAIL_RX_CHANNEL_HOPPING_OPTIONS_NONE,
///   };
///   status = RAIL_ConfigRxDutyCycle(rail_handle, &duty_cycle_config);
///   assert(status == RAIL_STATUS_NO_ERROR);
///   status = RAIL_EnableRxDutyCycle(rail_handle, true);
///   assert(status == RAIL_STATUS_NO_ERROR);
///
///   // Application main loop
///   while (1) {
///     if (dutyCycleEnd) {
///       dutyCycleEnd = false;
///       // Schedule the next receive.
///       RAIL_ScheduleRxConfig_t rxConfig = {
///         .start = periodicWakeupUs,
///         .startMode = RAIL_TIME_DELAY,
///         .end = 0U,
///         .endMode = RAIL_TIME_DISABLED,
///         .rxTransitionEndSchedule = 0U,
///         .hardWindowEnd = 0U
///       };
///       RAIL_Idle(railHandle, RAIL_IDLE_ABORT, true);
///       RAIL_StartScheduledRx(railHandle, channel, &rxConfig, NULL);
///     }
///     // ... do normal app stuff and set shouldSleep when we want to sleep
///     if (shouldSleep) {
///       // Let the CPU go to sleep if the system allows it.
///       sl_power_manager_sleep();
///     }
///   }
/// }
/// @endcode
///
/// @note Use the compile time symbol \ref RAIL_SUPPORTS_CHANNEL_HOPPING or
///   the runtime call \ref RAIL_SupportsChannelHopping() to check whether
///   the platform supports this feature.
///
/// @note Calling this function will overwrite any settings configured with
///   \ref RAIL_ConfigRxChannelHopping().
///
RAIL_Status_t RAIL_ConfigRxDutyCycle(RAIL_Handle_t railHandle,
                                     const RAIL_RxDutyCycleConfig_t *config);

/**
 * Enable RX duty cycle mode.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in] enable Enable (true) or disable (false) RX Duty Cycling.
 * @return Status code indicating success of the function call.
 *
 * Enable or disable RX duty cycle mode. After this is called, the radio
 * will begin duty cycling each time it enters RX, based on the
 * configuration passed to \ref RAIL_ConfigRxDutyCycle(). This API must not
 * be called while the radio is on.
 *
 * @note Use the compile time symbol \ref RAIL_SUPPORTS_CHANNEL_HOPPING or
 *   the runtime call \ref RAIL_SupportsChannelHopping() to check whether
 *   the platform supports this feature.
 *
 * @note Calling this function will overwrite any settings configured with
 *   \ref RAIL_EnableRxChannelHopping().
 */
RAIL_Status_t RAIL_EnableRxDutyCycle(RAIL_Handle_t railHandle,
                                     bool enable);

/**
 * Get the default RX duty cycle configuration.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[out] config An application-provided non-NULL pointer to store
 *   the default RX duty cycle configuration.
 * @return Status code indicating success of the function call.
 *   Note that \ref RAIL_STATUS_INVALID_PARAMETER will be returned if the current
 *   channel's radio configuration does not support the requested information.
 *
 * To save power during RX, an application may want to go to low power as long as
 * possible by periodically waking up and trying to
 * "sense" if there are any incoming packets. This API returns the recommended
 * RX duty cycle configuration, so the application can enter low power mode
 * periodically without missing packets. To wake up
 * earlier, the application can reduce the delay parameter.
 * Note that these value might be different if any configuration / channel has
 * changed.
 **/
RAIL_Status_t RAIL_GetDefaultRxDutyCycleConfig(RAIL_Handle_t railHandle,
                                               RAIL_RxDutyCycleConfig_t *config);

/** @} */ // end of group Rx_Channel_Hopping

/******************************************************************************
 * Multiprotocol-Specific Functions
 *****************************************************************************/
/**
 * @addtogroup Multiprotocol
 * @brief Multiprotocol scheduler APIs to support multiple time-sliced PHYs.
 * @{
 */

/**
 * Yield the radio to other configurations.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @return Status code indicating success of the function call.
 *
 * This function is used to indicate that the previous transmit or scheduled
 * receive operation has completed. It must be used in multiprotocol RAIL because
 * the scheduler assumes that any transmit or receive operation that is started
 * can go on indefinitely based on state transitions and your protocol.
 * RAIL will not allow a lower priority tasks to run until this is called so it
 * can negatively impact performance of those protocols if this is omitted or
 * delayed. It is also possible to call the \ref RAIL_Idle() API to
 * both terminate the operation and idle the radio. In single protocol RAIL
 * this API does nothing, however, if RAIL Power Manager is initialized,
 * calling \ref RAIL_YieldRadio() after scheduled TX/RX and instantaneous TX
 * completion, is required, to indicate to the Power Manager that the the radio
 * is no longer busy and can be idled for sleeping.
 *
 * See \ref rail_radio_scheduler_yield for more details.
 */
RAIL_Status_t RAIL_YieldRadio(RAIL_Handle_t railHandle);

/**
 * Get the status of the RAIL scheduler.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @return \ref RAIL_SchedulerStatus_t status.
 *
 * This function can only be called from a callback context after the
 * \ref RAIL_EVENT_SCHEDULER_STATUS event occurs.
 */
RAIL_SchedulerStatus_t RAIL_GetSchedulerStatus(RAIL_Handle_t railHandle);

/**
 * Get the status of the RAIL scheduler, specific to the radio operation,
 * along with \ref RAIL_Status_t returned by RAIL API invoked by the
 * RAIL scheduler.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[out] pSchedulerStatus An application-provided pointer to store
 *   \ref RAIL_SchedulerStatus_t status. Can be NULL as long as pRailStatus
 *   is not NULL.
 * @param[out] pRailStatus An application-provided pointer to store
 *   \ref RAIL_Status_t of the RAIL API invoked by the RAIL scheduler.
 *   Can be NULL as long as pSchedulerStatus is not NULL.
 * @return Status code indicating success of the function call.
 *
 * This function can only be called from a callback context after the
 * \ref RAIL_EVENT_SCHEDULER_STATUS event occurs.
 */
RAIL_Status_t RAIL_GetSchedulerStatusAlt(RAIL_Handle_t railHandle,
                                         RAIL_SchedulerStatus_t *pSchedulerStatus,
                                         RAIL_Status_t *pRailStatus);

/**
 * Change the priority of a specified task type in multiprotocol.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in] priority Desired new priority for the railHandle's active task
 * @param[in] taskType Type of task whose priority should be updated
 * @return Status code indicating success of the function call.
 *
 * While the application can use this function however it likes, a major use
 * case is being able to increase an infinite receive priority while receiving
 * a packet. In other words, a given \ref RAIL_Handle_t can maintain a very low
 * priority background receive, but upon getting a
 * \ref RAIL_EVENT_RX_SYNC1_DETECT_SHIFT or
 * \ref RAIL_EVENT_RX_SYNC2_DETECT_SHIFT event, the app can call this function
 * to increase the background RX priority to lower the risk another protocol
 * might preempt during packet reception.
 */
RAIL_Status_t RAIL_SetTaskPriority(RAIL_Handle_t railHandle,
                                   uint8_t priority,
                                   RAIL_TaskType_t taskType);

/**
 * Get time needed to switch between protocols.
 *
 * @return \ref RAIL_Time_t Time needed to switch between protocols.
 */
RAIL_Time_t RAIL_GetTransitionTime(void);

/**
 * Set time needed to switch between protocols. Call this API
 * only once, before any protocol is initialized via
 * \ref RAIL_Init(). Changing this value during normal operation
 * can result in improper scheduling behavior.
 *
 * @param[in] transitionTime Time needed to switch between protocols.
 */
void RAIL_SetTransitionTime(RAIL_Time_t transitionTime);

/** @} */ // end of group Multiprotocol

/******************************************************************************
 * Diagnostic
 *****************************************************************************/
/**
 * @addtogroup Diagnostic
 * @brief APIs for diagnostic and test chip modes
 * @{
 */

/**
 * Configure direct mode for RAIL.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in] directModeConfig A pointer to a configuration structure to specify direct mode
 *   parameters. Default configuration will be used if NULL is passed.
 * @return \ref RAIL_STATUS_NO_ERROR on success and an error code on failure.
 *
 * This API configures direct mode and should be called before
 * calling \ref RAIL_EnableDirectMode(). If this function is not called, the
 * following default \ref RAIL_DirectModeConfig_t configuration will be used: \n
 * @code{.c}
 * RAIL_DirectModeConfig_t defaultConfig = {
 *   .syncRx   = false,
 *   .syncTx   = false,
 *   .doutPort = SL_GPIO_PORT_A,
 *   .doutPin  = 5,
 *   .dinPort  = SL_GPIO_PORT_A,
 *   .dinPin   = 7,
 *   .dclkPort = SL_GPIO_PORT_A,
 *   .dclkPin  = 6,
 * };
 * @endcode
 *
 * @warning This API is not safe to use in a multiprotocol app.
 */
RAIL_Status_t RAIL_ConfigDirectMode(RAIL_Handle_t railHandle,
                                    const RAIL_DirectModeConfig_t *directModeConfig);

/**
 *  Enable or disable direct mode for RAIL.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in] enable Whether or not to enable direct mode for TX and RX.
 * @return \ref RAIL_STATUS_NO_ERROR on success and an error code on failure.
 *
 * See \ref RAIL_EnableDirectModeAlt() for more detailed function
 * description.
 *
 * @warning New applications should consider using \ref RAIL_EnableDirectModeAlt() for
 *   this functionality.
 *
 * @note This feature is only available on certain devices.
 *   \ref RAIL_SupportsDirectMode() can be used to check if a particular
 *   device supports this feature or not.
 *
 * @warning As this function relies on GPIO access and RAIL is meant to run in
 *   TrustZone non-secure world, it is not supported if GPIO is configured as
 *   secure peripheral and it will return \ref RAIL_STATUS_INVALID_CALL.
 */
RAIL_Status_t RAIL_EnableDirectMode(RAIL_Handle_t railHandle,
                                    bool enable);

/**
 * Enable or disable direct mode for RAIL.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in] enableDirectTx Enable direct mode for data being transmitted out
 *   of the radio.
 * @param[in] enableDirectRx Enable direct mode for data being received from
 *   the radio.
 * @return \ref RAIL_STATUS_NO_ERROR on success or an error code on failure.
 *
 * This API enables or disables the modem and GPIOs for direct mode operation.
 * see \ref RAIL_ConfigDirectMode() for information on selecting the
 * correct hardware configuration. If direct mode is enabled,
 * packets are output and input directly to the radio via GPIO
 * and RAIL packet handling is ignored.
 *
 * @note This feature is only available on certain chips.
 *   \ref RAIL_SupportsDirectMode() can be used to check if a particular
 *   chip supports this feature or not.
 *
 * @warning This API is not safe to use in a multiprotocol app.
 *
 * @warning As this function relies on GPIO access and RAIL is meant to run in
 *   TrustZone non-secure world, it is not supported if GPIO is configured as
 *   secure peripheral and it will return \ref RAIL_STATUS_INVALID_CALL.
 */
RAIL_Status_t RAIL_EnableDirectModeAlt(RAIL_Handle_t railHandle,
                                       bool enableDirectTx,
                                       bool enableDirectRx);

/**
 * Get the radio subsystem clock frequency in Hz.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @return Radio subsystem clock frequency in Hz.
 */
uint32_t RAIL_GetRadioClockFreqHz(RAIL_Handle_t railHandle);

/**
 * Set the crystal tuning.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in] tune A chip-dependent crystal capacitor bank tuning parameter.
 * @return Status code indicating success of the function call.
 *
 * Tunes the crystal that the radio depends on to change the location of the
 * center frequency for transmitting and receiving. This function will only
 * succeed if the radio is idle at the time of the call.
 *
 * @note This function proportionally affects the entire chip's timing
 *   across all its peripherals, including radio tuning and channel spacing.
 *   It is recommended to call this function only when HFXO is not being used,
 *   as it can cause disturbance on the HFXO frequency.
 *   A separate function, \ref RAIL_SetFreqOffset(), can be used to adjust
 *   just the radio tuner without disturbing channel spacing or other chip
 *   peripheral timing.
 * @note This API sets CTUNEXIANA and internally
 *   CTUNEXOANA = CTUNEXIANA + delta where delta is set or changed by
 *   \ref RAIL_SetTuneDelta(). The default delta may not be 0 on some devices.
 */
RAIL_Status_t RAIL_SetTune(RAIL_Handle_t railHandle, uint32_t tune);

/**
 * Get the crystal tuning.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @return A chip-dependent crystal capacitor bank tuning parameter.
 *
 * Retrieves the current tuning value used by the crystal that the radio
 * depends on.
 * @note This is the CTUNEXIANA value.
 */
uint32_t RAIL_GetTune(RAIL_Handle_t railHandle);

/**
 * Set the crystal tuning delta.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in] delta A chip-dependent crystal capacitor bank tuning delta.
 * @return Status code indicating success of the function call.
 *
 * Set the CTUNEXOANA delta for \ref RAIL_SetTune() to use:
 * CTUNEXOANA = CTUNEXIANA + delta (subject to field-size limitations).
 * This function does not change CTUNE values;
 * call \ref RAIL_SetTune() to put a new delta into effect.
 */
RAIL_Status_t RAIL_SetTuneDelta(RAIL_Handle_t railHandle, int32_t delta);

/**
 * Get the crystal tuning delta.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @return A chip-dependent crystal capacitor bank tuning delta.
 *
 * Retrieves the current tuning delta used by \ref RAIL_SetTune().
 * @note The default delta if \ref RAIL_SetTuneDelta() has never been called
 *   is device-dependent and may not be 0.
 */
int32_t RAIL_GetTuneDelta(RAIL_Handle_t railHandle);

/**
 * Get the frequency offset.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @return The measured frequency offset on a received packet.
 *   The units are described in the \ref RAIL_FrequencyOffset_t
 *   documentation. If this returns \ref RAIL_FREQUENCY_OFFSET_INVALID,
 *   it was called while the radio wasn't active and there is no way
 *   to get the frequency offset.
 *
 * Retrieves the measured frequency offset used during the previous
 * received packet, which includes the current radio frequency offset
 * (see \ref RAIL_SetFreqOffset()). If the chip has not been in RX,
 * it returns the nominal radio frequency offset.
 *
 * @note Changing to any non-idle radio state after reception can cause this
 *   value to be overwritten so it is safest to capture during packet reception.
 */
RAIL_FrequencyOffset_t RAIL_GetRxFreqOffset(RAIL_Handle_t railHandle);

/**
 * Set the nominal radio frequency offset.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in] freqOffset \ref RAIL_FrequencyOffset_t parameter (signed, 2's
 *   complement).
 * @return Status code indicating success of the function call.
 *
 * This function is used to adjust the radio's tuning frequency slightly up or down.
 * It might be used in conjunction with \ref RAIL_GetRxFreqOffset() after
 * receiving a packet from a peer to adjust the tuner to better match the
 * peer's tuned frequency.
 *
 * @note Unlike \ref RAIL_SetTune(), which affects the entire chip's
 *   timing including radio tuning and channel spacing, this function
 *   only affects radio tuning without disturbing channel spacing or
 *   other chip peripheral timing.
 */
RAIL_Status_t RAIL_SetFreqOffset(RAIL_Handle_t railHandle,
                                 RAIL_FrequencyOffset_t freqOffset);

/**
 * Start transmitting a stream on a certain channel.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in] channel A channel on which to emit a stream.
 * @param[in] mode Choose the stream mode (PN9, and so on).
 * @return Status code indicating success of the function call.
 *
 * Begins streaming onto the given channel. The sources can either be an
 * unmodulated carrier wave or an encoded stream of bits from a PN9 source.
 * All ongoing radio operations will be stopped before transmission begins.
 */
RAIL_Status_t RAIL_StartTxStream(RAIL_Handle_t railHandle,
                                 uint16_t channel,
                                 RAIL_StreamMode_t mode);

/**
 * Start transmitting a stream on a certain channel with the ability to select
 * an antenna.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in] channel A channel on which to emit a stream.
 * @param[in] mode Choose the stream mode (PN9, and so on).
 * @param[in] options Choose the TX Antenna option.
 *   Takes only \ref RAIL_TX_OPTION_ANTENNA0, \ref RAIL_TX_OPTION_ANTENNA1,
 *   \ref RAIL_TX_OPTIONS_DEFAULT or \ref RAIL_TX_OPTIONS_NONE from the
 *   \ref RAIL_TxOptions_t. If some other value is used then, transmission
 *   is possible on any antenna.
 * @return Status code indicating success of the function call.
 *
 * Begins streaming onto the given channel. The sources can either be an
 * unmodulated carrier wave or an encoded stream of bits from a PN9 source.
 * All ongoing radio operations will be stopped before transmission begins.
 */
RAIL_Status_t RAIL_StartTxStreamAlt(RAIL_Handle_t railHandle,
                                    uint16_t channel,
                                    RAIL_StreamMode_t mode,
                                    RAIL_TxOptions_t options);

/**
 * Stop stream transmission and idle the radio.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @return Status code indicating success of the function call.
 *
 * Halts the transmission started by \ref RAIL_StartTxStream().
 */
RAIL_Status_t RAIL_StopTxStream(RAIL_Handle_t railHandle);

/**
 * Stop infinite preamble transmission started and start transmitting the rest
 * of the packet.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @return Status code indicating success of the function call:
 *   \ref RAIL_STATUS_NO_ERROR if infinite preamble was stopped;
 *   \ref RAIL_STATUS_INVALID_CALL if the radio isn't configured for infinite
 *   preamble;
 *   \ref RAIL_STATUS_INVALID_STATE if the radio isn't transmitting.
 *
 * This function is only useful for radio configurations that specify an
 * infinite preamble. Call this API only after \ref RAIL_EVENT_TX_STARTED
 * has occurred and the radio is transmitting.
 */
RAIL_Status_t RAIL_StopInfinitePreambleTx(RAIL_Handle_t railHandle);

/**
 * Configure the verification of radio memory contents.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in,out] configVerify A pointer to a configuration structure made available to
 *   RAIL to perform radio state verification. This structure must be
 *   allocated in application global read-write memory. RAIL may modify
 *   fields within or referenced by this structure during its operation.
 * @param[in] radioConfig A radio configuration (pointer) that is to be used as a
 *   white list for verifying memory contents.
 * @param[in] cb A callback that notifies the application of a mismatch in
 *   expected vs actual memory contents. A NULL parameter may be passed in
 *   if a callback is not needed by the application.
 * @return \ref RAIL_STATUS_NO_ERROR if setup of the verification feature
 *   successfully occurred.
 *   \ref RAIL_STATUS_INVALID_PARAMETER is returned if the provided railHandle
 *   or configVerify structures are invalid.
 */
RAIL_Status_t RAIL_ConfigVerification(RAIL_Handle_t railHandle,
                                      RAIL_VerifyConfig_t *configVerify,
                                      RAIL_RadioConfig_t radioConfig,
                                      RAIL_VerifyCallbackPtr_t cb);

/**
 * Verify radio memory contents.
 *
 * @param[in,out] configVerify A pointer to the configuration structure
 *   previously established by \ref RAIL_ConfigVerification().
 * @param[in] durationUs The duration (in microseconds) for how long memory
 *   verification should occur before returning to the application. A value of
 *   \ref RAIL_VERIFY_DURATION_MAX indicates that all memory contents should be
 *   verified before returning to the application.
 * @param[in] restart This flag only has meaning if a previous call of this
 *   function returned \ref RAIL_STATUS_SUSPENDED. By restarting (true), the
 *   verification process starts over from the beginning, or by resuming
 *   where verification left off after being suspended (false), verification
 *   can proceed towards completion.
 * @return \ref RAIL_STATUS_NO_ERROR if the contents of all applicable
 *   memory locations have been verified.
 *   \ref RAIL_STATUS_SUSPENDED is returned if the provided test duration
 *   expired but the time was not sufficient to verify all memory contents.
 *   By calling \ref RAIL_Verify() again, further verification will commence.
 *   \ref RAIL_STATUS_INVALID_PARAMETER is returned if the provided
 *   verifyConfig structure pointer is not configured for use by the active
 *   RAIL handle.
 *   \ref RAIL_STATUS_INVALID_STATE is returned if any of the verified
 *   memory contents are different from their reference values.
 */
RAIL_Status_t RAIL_Verify(RAIL_VerifyConfig_t *configVerify,
                          uint32_t durationUs,
                          bool restart);

#ifndef DOXYGEN_SHOULD_SKIP_THIS

/**
 * Enable radio state change interrupt.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in] enable Enable/disable Radio state change interrupt.
 * @return Status code indicating success of the function call. Returns
 *   \ref RAIL_STATUS_NO_ERROR once the interrupt has been enabled or disabled.
 *
 * @note If enabled, state change events are reported through the separate
 *   \ref RAILCb_RadioStateChanged() callback.
 */
RAIL_Status_t RAIL_EnableRadioStateChanged(RAIL_Handle_t railHandle,
                                           bool enable);

/**
 * Callback on radio state changes.
 *
 * @param[in] state The current radio state.
 */
void RAILCb_RadioStateChanged(uint8_t state);

/**
 * Get the current radio state.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @return An enumeration, \ref RAIL_RadioStateEfr32_t, for the current radio
 *   state.
 *
 */
RAIL_RadioStateEfr32_t RAIL_GetRadioStateAlt(RAIL_Handle_t railHandle);

#endif//DOXYGEN_SHOULD_SKIP_THIS

/** @} */ // end of group Diagnostic

/******************************************************************************
 * Front End Module Voltage Detection (VDET)
 *****************************************************************************/
/**
 * @addtogroup VDET Front End Module Voltage Detection
 * @brief APIs for configuring and detecting a voltage from a Front End Module (VDET).
 *
 * The rail_util_vdet plugin lets customers measure an output voltage from their attached
 * Front End Module at a specific time in a Tx packet. This information allows
 * optimizations to power configuration, and monitoring FEM performance.
 *
 * @note VDET is only supported with EFR32xG25 devices.
 * @{
 */

/**
 * Configure the VDET plugin.
 *
 * @param[in] genericRailHandle A radio-generic RAIL handle.
 * @param[in] config A pointer to a \ref RAIL_VdetConfig_t struct that contains
 *   configuration data for the VDET.
 * @return \ref RAIL_Status_t
 *   \retval RAIL_STATUS_NO_ERROR - All went well
 *   \retval RAIL_STATUS_INVALID_STATE - VDET is enabled. Must be disabled first.
 *   \retval RAIL_STATUS_INVALID_PARAMETER - mode/resolution/delayUs out-of-bounds.
 *
 * @warning As this function relies on GPIO access and RAIL is meant to run in
 *   TrustZone non-secure world, it is not supported if GPIO is configured as
 *   secure peripheral and it will return \ref RAIL_STATUS_INVALID_CALL.
 */
RAIL_Status_t RAIL_ConfigVdet(RAIL_Handle_t genericRailHandle,
                              const RAIL_VdetConfig_t *config);

/**
 * Get the VDET plugin configuration.
 *
 * @param[in] genericRailHandle A radio-generic RAIL handle.
 * @param[out] config A pointer to a \ref RAIL_VdetConfig_t struct that will
 *   return configuration data for the VDET.
 * @return \ref RAIL_Status_t
 *   \retval RAIL_STATUS_NO_ERROR - All went well.
 */
RAIL_Status_t RAIL_GetVdetConfig(RAIL_Handle_t genericRailHandle,
                                 RAIL_VdetConfig_t *config);

/**
 * Enable the VDET plugin.
 *
 * @param[in] genericRailHandle A RAIL instance handle.
 * @param[in] enable Enable or disable \ref RAIL_VDET_MODE_AUTOMATIC mode captures.
 *   Begins measurement if in \ref RAIL_VDET_MODE_IMMEDIATE.
 * @return \ref RAIL_Status_t
 *   \retval RAIL_STATUS_NO_ERROR - All went well, VDET is enabled or disabled.
 *   \retval RAIL_STATUS_INVALID_STATE - VDET has not been configured or VDET was not idle.
 *     VDET is disabled.
 *
 * @warning As this function relies on HFXO access and RAIL is meant to run in
 *   TrustZone non-secure world, it is not supported if HFXO is configured as
 *   secure peripheral and it will return \ref RAIL_STATUS_INVALID_CALL.
 */
RAIL_Status_t RAIL_EnableVdet(RAIL_Handle_t genericRailHandle,
                              bool enable);

/**
 * Check if the VDET plugin is enabled.
 *
 * @param[in] genericRailHandle A RAIL instance handle.
 * @return bool
 */
bool RAIL_IsVdetEnabled(RAIL_Handle_t genericRailHandle);

/**
 * Get VDET measurement. A processed measurement in millivolts.
 *
 * @param[in] genericRailHandle A RAIL instance handle.
 * @param[out] pVdetMv A pointer to a uint32_t for returning the measurement.
 * @return \ref RAIL_Status_t
 *   \retval RAIL_STATUS_NO_ERROR - All went well, value in *pVdetMv is valid.
 *   \retval RAIL_STATUS_INVALID_CALL - VDET is in progress, wait until
 *     VDET capture is complete and try again.
 *   \retval RAIL_STATUS_INVALID_STATE - VDET is not enabled or valid. Wait until next packet
       and try reading again.\n
 *       \ref RAIL_VDET_MODE_AUTOMATIC - Wait until next packet and try reading again.\n
 *       \ref RAIL_VDET_MODE_IMMEDIATE - Resend \ref RAIL_EnableVdet().\n
 *   \retval RAIL_STATUS_INVALID_PARAMETER - In \ref RAIL_VDET_MODE_IMMEDIATE, resend \ref RAIL_EnableVdet().\n
 *   \retval RAIL_STATUS_SUSPENDED - Blocked by AuxADC contention. Wait until next packet
       and try reading again.
 *
 * @warning As this function relies on HFXO access and RAIL is meant to run in
 *   TrustZone non-secure world, it is not supported if HFXO is configured as
 *   secure peripheral and it will return \ref RAIL_STATUS_INVALID_CALL.
 */
RAIL_Status_t RAIL_GetVdet(RAIL_Handle_t genericRailHandle,
                           uint32_t *pVdetMv);

/** @} */ // end of group VDET

/******************************************************************************
 * Thermal Protection
 *****************************************************************************/
/**
 * @addtogroup Thermal_Protection Thermal Protection
 * @{
 */

/**
 * Enable or disable the thermal protection if \ref RAIL_SUPPORTS_THERMAL_PROTECTION
 * is defined and update the temperature threshold and cool down hysteresis preventing or
 * allowing transmissions.
 *
 * @param[in] genericRailHandle A radio-generic RAIL handle.
 * @param[in] chipTempConfig A pointer to a \ref RAIL_ChipTempConfig_t that contains
 *   the configuration to be applied.
 * @return Status code indicating the result of the function call.
 *   Returns \ref RAIL_STATUS_INVALID_PARAMETER if enable field from \ref RAIL_ChipTempConfig_t
 *   is set to false when an EFF is present on the board.
 *
 * When the temperature threshold minus a precise number of degrees
 * specified by the cool down hysteresis parameter is exceeded,
 * any future transmits are blocked until the temperature decreases below that limit.
 * Besides, if the temperature threshold is exceeded, any active transmit is aborted.
 *
 * By default the threshold is set to \ref RAIL_CHIP_TEMP_THRESHOLD_MAX and
 * the cool down hysteresis is set to \ref RAIL_CHIP_TEMP_COOLDOWN_DEFAULT.
 *
 * @note The thermal protection is automatically enabled when an EFF is present
 *   on the board. There is no use in calling this API in this case.
 */
RAIL_Status_t RAIL_ConfigThermalProtection(RAIL_Handle_t genericRailHandle,
                                           const RAIL_ChipTempConfig_t *chipTempConfig);

/**
 * Get the current thermal configuration parameter and status.
 *
 * @param[in] genericRailHandle A radio-generic RAIL handle.
 * @param[out] chipTempConfig A non-NULL pointer to a \ref RAIL_ChipTempConfig_t that will
 *   be updated with the current configuration.
 * @return Status code indicating the result of the function call.
 */
RAIL_Status_t RAIL_GetThermalProtection(RAIL_Handle_t genericRailHandle,
                                        RAIL_ChipTempConfig_t *chipTempConfig);

/** Number of temperature values provided for HFXO metrics */
#define RAIL_HFXO_TEMP_MEASURE_COUNT              (1U)

/** Total number of temperature values provided by \ref RAIL_GetTemperature(). */
#define RAIL_TEMP_MEASURE_COUNT  (RAIL_CHIP_TEMP_MEASURE_COUNT \
                                  + RAIL_HFXO_TEMP_MEASURE_COUNT)

/**
 * Get the different temperature measurements in Kelvin done by sequencer or host.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[out] tempBuffer The address of the array that will contain temperatures.
 *    This array must have at least \ref RAIL_TEMP_MEASURE_COUNT entries.
 * @param[in] reset true to reset the temperature statistics, false otherwise.
 * @return Status code indicating success of the function call.
 *
 * Temperatures, in Kelvin, are stored in tempBuffer such as:
 * - tempBuffer[0] is the chip temperature
 * - tempBuffer[1] is the minimal chip temperature
 * - tempBuffer[2] is the maximal chip temperature
 *
 * Values that are not populated yet or incorrect are set to 0.
 *
 * If \ref RAIL_SUPPORTS_HFXO_COMPENSATION
 * tempBuffer[3] is the HFXO temperature
 */
RAIL_Status_t RAIL_GetTemperature(RAIL_Handle_t railHandle,
                                  int16_t tempBuffer[RAIL_TEMP_MEASURE_COUNT],
                                  bool reset);

/** @} */ // end of group Thermal_Protection

/******************************************************************************
 * Retiming
 *****************************************************************************/
/**
 * @addtogroup Retiming
 * @{
 * @brief EFR32-specific retiming capability.
 *
 * The EFR product families have many digital and analog modules that can run
 * in parallel with a radio. These combinations can cause interference and
 * degradation on the radio RX sensitivity. Retiming can
 * modify the clocking of the digital modules to reduce the interference.
 */

/**
 * Configure retiming options.
 *
 * @param[in] railHandle A handle of RAIL instance.
 * @param[in] mask A bitmask containing which options should be modified.
 * @param[in] options A bitmask containing desired configuration settings.
 *   Bit positions for each option are found in the \ref RAIL_RetimeOptions_t.
 * @return Status code indicating success of the function call.
 */
RAIL_Status_t RAIL_ConfigRetimeOptions(RAIL_Handle_t railHandle,
                                       RAIL_RetimeOptions_t mask,
                                       RAIL_RetimeOptions_t options);

/**
 * Get the currently configured retiming option.
 *
 * @param[in] railHandle A handle of RAIL instance.
 * @param[out] pOptions A pointer to configured retiming options
 *   bitmask indicating which are enabled.
 * @return Status code indicating success of the function call.
 */
RAIL_Status_t RAIL_GetRetimeOptions(RAIL_Handle_t railHandle,
                                    RAIL_RetimeOptions_t *pOptions);

/**
 * Indicate that the DCDC peripheral bus clock enable has changed allowing
 * RAIL to react accordingly.
 *
 * @return Status code indicating success of the function call.
 *
 * @note This should be called after DCDC has been enabled or disabled.
 */
RAIL_Status_t RAIL_ChangedDcdc(void);

/** @} */ // end of group Retiming

#ifndef DOXYGEN_SHOULD_SKIP_THIS

/******************************************************************************
 * Debug
 *****************************************************************************/
/**
 * @addtogroup Debug
 * @brief APIs for debugging
 * @{
 */

/**
 * Configure the debug mode for the radio library. Do not use this function
 * unless instructed by Silicon Labs.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in] debugMode Debug mode to enter.
 * @return Status code indicating success of the function call.
 */
RAIL_Status_t RAIL_SetDebugMode(RAIL_Handle_t railHandle, uint32_t debugMode);

/**
 * Return the debug mode for the radio library. Do not use this function
 * unless instructed by Silicon Labs.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @return Debug mode for the radio library.
 */
uint32_t RAIL_GetDebugMode(RAIL_Handle_t railHandle);

/**
 * Override the radio base frequency.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in] freq A desired frequency in Hz.
 * @return Status code indicating success of the function call.
 *
 * Sets the radio to transmit at the frequency given. This function can only
 * be used while in \ref RAIL_DEBUG_MODE_FREQ_OVERRIDE. The given frequency
 * needs to be close to the base frequency of the current PHY. After this
 * call, a full reset is needed to restore normal RAIL operation.
 */
RAIL_Status_t RAIL_OverrideDebugFrequency(RAIL_Handle_t railHandle,
                                          uint32_t freq);

/**
 * Get the size of the radio's multiprotocol scheduler state buffer.
 *
 * @param[in] genericRailHandle A radio-generic RAIL handle.
 * @return Size, in bytes, of the radio's internal scheduler state buffer.
 *   Zero is returned if the handle is invalid or this is the singleprotocol
 *   library.
 */
uint32_t RAIL_GetSchedBufferSize(RAIL_Handle_t genericRailHandle);

/** @} */ // end of group Debug

#endif//DOXYGEN_SHOULD_SKIP_THIS

/******************************************************************************
 * Assertion Callback
 *****************************************************************************/
/**
 * @addtogroup Assertions
 * @brief Callbacks called by assertions
 *
 * The assertion framework was implemented to not only
 * assert that certain conditions are true in a block of code, but also
 * to handle them more appropriately. In previous implementations,
 * the behavior upon a failed assert was to hang in a while(1) loop.
 * However, with the callback, each assert is given a unique error code so that
 * they can be handled on a more case-by-case basis. For documentation on each
 * of the errors, see the rail_assert_error_codes.h file.
 * \ref RAIL_ASSERT_ERROR_MESSAGES[errorCode] gives the explanation of the error.
 * With asserts built into the library, users can choose how to handle each
 * error inside the callback.
 *
 * @{
 */

/**
 * Callback called upon failed assertion.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in] errorCode Value passed in by the calling assertion API indicating
 *   the RAIL assertion that failed.
 */
void RAILCb_AssertFailed(RAIL_Handle_t railHandle,
                         RAIL_AssertErrorCodes_t errorCode);

/** @} */ // end of group Assertions

/******************************************************************************
 * External_Thermistor
 *****************************************************************************/
/**
 * @addtogroup External_Thermistor External Thermistor
 * @brief APIs to measure temperature using an external thermistor
 *
 * This feature allows reading the temperature via an external thermistor on
 * chips that support it. This will require connecting the necessary components
 * and configuring the pins as required.
 *
 * @{
 */

/**
 * Start a thermistor measurement.
 *
 * @param[in] railHandle A radio-generic or real RAIL instance handle.
 * @return Status code indicating success of the function call.
 *   Returns \ref RAIL_STATUS_INVALID_STATE if the thermistor is started while the
 *   radio is transmitting.
 *
 * To get the thermistor impedance, call the
 * function \ref RAIL_GetThermistorImpedance(). On platforms having
 * \ref RAIL_SUPPORTS_EXTERNAL_THERMISTOR, this function reconfigures
 * GPIO_THMSW_EN_PIN located in GPIO_THMSW_EN_PORT.
 * To locate this pin, refer to the data sheet or appropriate header files
 * of the device. For proper operation, \ref RAIL_Init() must be called before
 * using this function.
 *
 * @note When an EFF is attached, this function must not be called during
 *   transmit.
 *
 * @warning This API is not safe to use in a multiprotocol app.
 *
 * @warning As this function relies on EMU, GPIO and HFXO access and RAIL is
 *   meant to run in TrustZone non-secure world, it is not supported if EMU,
 *   GPIO or HFXO are configured as secure peripheral and it will return
 *   \ref RAIL_STATUS_INVALID_CALL.
 */
RAIL_Status_t RAIL_StartThermistorMeasurement(RAIL_Handle_t railHandle);

/**
 * Get the thermistor impedance measurement and return \ref
 * RAIL_INVALID_THERMISTOR_VALUE if the thermistor is not properly
 * configured or the thermistor measurement is not ready.
 *
 * @param[in] railHandle A radio-generic or real RAIL instance handle.
 * @param[out] thermistorImpedance A pointer to a uint32_t updated
 *   with the current thermistor impedance measurement in Ohms.
 * @return Status code indicating success of the function call.
 *
 * @note This function is already called in \ref RAIL_CalibrateHFXO().
 *   It does not need to be manually called during the compensation sequence.
 */
RAIL_Status_t RAIL_GetThermistorImpedance(RAIL_Handle_t railHandle,
                                          uint32_t *thermistorImpedance);

/**
 * Convert the thermistor impedance into temperature, in Celsius.
 *
 * @param[in] railHandle A radio-generic or real RAIL instance handle.
 * @param[in] thermistorImpedance Current thermistor impedance measurement in
 *   Ohms.
 * @param[out] thermistorTemperatureC A non-NULL pointer to an int16_t updated
 *   with the current thermistor temperature in eighth of Celsius degrees.
 * @return Status code indicating success of the function call.
 *
 * A version of this function is provided in the \ref rail_util_thermistor
 * plugin for Silicon Labs radio boards. For custom boards this function can be
 * modified and re-implemented as needed.
 *
 * @note This plugin is mandatory on EFR32xG25 platform.
 */
RAIL_Status_t RAIL_ConvertThermistorImpedance(RAIL_Handle_t railHandle,
                                              uint32_t thermistorImpedance,
                                              int16_t *thermistorTemperatureC);

/**
 * Compute the crystal PPM deviation from the thermistor temperature.
 *
 * @param[in] railHandle A radio-generic or real RAIL instance handle.
 * @param[in] crystalTemperatureC Current crystal temperature, in Celsius.
 * @param[out] crystalPPMError A non-NULL pointer to an int8_t updated
 *   with the current ppm error in ppm units.
 * @return Status code indicating success of the function call.
 *
 * This function is provided in the rail_util_thermistor plugin to get
 * accurate values from our boards thermistor. For a custom board, this
 * function could be modified and re-implemented for other needs.
 *
 * @note This plugin is mandatory on EFR32xG25 platform.
 */
RAIL_Status_t RAIL_ComputeHFXOPPMError(RAIL_Handle_t railHandle,
                                       int16_t crystalTemperatureC,
                                       int8_t *crystalPPMError);

/**
 * Configure the GPIO for thermistor usage.
 *
 * @param[in] railHandle A radio-generic or real RAIL instance handle.
 * @param[in] pHfxoThermistorConfig A non-NULL pointer to the thermistor configuration
 *   indicating the GPIO port and pin to use.
 * @return Status code indicating the result of the function call.
 *
 * @note The port and pin that must be passed in \ref RAIL_HFXOThermistorConfig_t
 *   are GPIO_THMSW_EN_PORT and GPIO_THMSW_EN_PIN respectively.
 *
 * @warning As this function relies on GPIO access and RAIL is meant to run in
 *   TrustZone non-secure world, it is not supported if GPIO is configured as
 *   secure peripheral and it will return \ref RAIL_STATUS_INVALID_CALL.
 */
RAIL_Status_t RAIL_ConfigHFXOThermistor(RAIL_Handle_t railHandle,
                                        const RAIL_HFXOThermistorConfig_t *pHfxoThermistorConfig);

/**
 * Configure the temperature parameters for HFXO compensation.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in] pHfxoCompensationConfig A non-NULL pointer to HFXO compensation parameters
 *   indicating the temperature variations used to trigger a compensation.
 * @return Status code indicating the result of the function call.
 *
 * @note This function must be called after \ref RAIL_ConfigHFXOThermistor() to succeed.
 *
 * In \ref RAIL_HFXOCompensationConfig_t, deltaNominal and
 * deltaCritical define the temperature variation triggering
 * a new compensation.
 * The field zoneTemperatureC defines the temperature separating
 * the nominal case (below) from the critical one (above).
 *
 * When enabled and either deltaNominal or deltaCritical
 * are exceeded, RAIL raises
 * event \ref RAIL_EVENT_CAL_NEEDED with \ref RAIL_CAL_TEMP_HFXO bit set.
 * The API \ref RAIL_StartThermistorMeasurement() must be called afterwards.
 * The latter will raise \ref RAIL_EVENT_THERMISTOR_DONE with calibration bit
 * \ref RAIL_CAL_COMPENSATE_HFXO set and a call to \ref RAIL_CalibrateHFXO() must follow.
 *
 * @note Set deltaNominal and deltaCritical to 0 to perform
 *   compensation after each transmit.
 */
RAIL_Status_t RAIL_ConfigHFXOCompensation(RAIL_Handle_t railHandle,
                                          const RAIL_HFXOCompensationConfig_t *pHfxoCompensationConfig);

/**
 * Get the temperature parameters for HFXO compensation.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[out] pHfxoCompensationConfig A non-NULL pointer to HFXO
 *   compensation parameters filled in by the function.
 * @return Status code indicating the result of the function call.
 */
RAIL_Status_t RAIL_GetHFXOCompensationConfig(RAIL_Handle_t railHandle,
                                             RAIL_HFXOCompensationConfig_t *pHfxoCompensationConfig);

/**
 * Compute a frequency offset and compensate HFXO accordingly.
 *
 * @param[in] railHandle A RAIL instance handle.
 * @param[in] crystalPPMError The current ppm error. Positive values indicate
 *   the HFXO frequency is too high; negative values indicate it's too low.
 * @return Status code indicating success of the function call.
 *
 * @note This function only works for platforms having
 *   \ref RAIL_SUPPORTS_EXTERNAL_THERMISTOR alongside \ref RAIL_SUPPORTS_HFXO_COMPENSATION.
 */
RAIL_Status_t RAIL_CompensateHFXO(RAIL_Handle_t railHandle, int8_t crystalPPMError);

/** @} */ // end of group External_Thermistor

/******************************************************************************
 * TrustZone
 *****************************************************************************/
/**
 * @addtogroup TrustZone
 * @brief APIs to use RAIL with TrustZone enabled and peripherals configured
 *   as secure.
 *
 * RAIL internally accesses CMU, EMU, GPIO, LDMA, HFXO, PRS and SYSRTC.
 * If some of them are configured as secure peripherals, some RAIL code must be
 * executed as secure code. To do so, callbacks gathered in
 * \ref RAIL_TZ_Config_t must be implemented and passed to RAIL through
 * \ref RAIL_TZ_InitNonSecure(). Each callback must do the non-secure/secure
 * transition, call \ref RAIL_TZ_CheckPeripheralsSecureStates() and then call
 * the corresponding RAIL API from secure world:
 *
 * | Secure peripheral |                                                                                                                                       Callbacks to implement                                                                                                                                           |
 * |-------------------|--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|
 * |       CMU         | \ref RAIL_TZ_Config_t::changedDcdcCallback, \ref RAIL_TZ_Config_t::configAntennaGpioCallback, \ref RAIL_TZ_Config_t::radioClockEnableCallback, \ref RAIL_TZ_Config_t::getRadioClockFreqHzCallback, \ref RAIL_TZ_Config_t::rfecaClockEnableCallback, \ref RAIL_TZ_Config_t::rfecaIsClockEnabledCallback |
 * |       EMU         | \ref RAIL_TZ_Config_t::readInternalTemperatureCallback, \ref RAIL_TZ_Config_t::enableSecureRadioIrqsCallback, \ref RAIL_TZ_Config_t::disableSecureRadioIrqsCallback                                                                                                                                    |
 * |       GPIO        | \ref RAIL_TZ_Config_t::configAntennaGpioCallback                                                                                                                                                                                                                                                       |
 * |       LDMA        | \ref RAIL_TZ_Config_t::radioPerformM2mLdmaCallback                                                                                                                                                                                                                                                     |
 * |       HFXO        | \ref RAIL_TZ_Config_t::configureHfxoCallback                                                                                                                                                                                                                                                           |
 *
 * RAIL internally calls platform functions that access CMU, EMU, GPIO, LDMA
 * HFXO and PRS.
 * If some of them are configured as secure peripherals, some functions must be
 * executed as secure code. To do so, those functions are prepended with weak
 * symbols and must be overwritten to do the non-secure/secure transition and
 * call the corresponding platform function from secure world:
 *
 * | Secure peripheral |                                Platform functions to overwrite                                |
 * |-------------------|-----------------------------------------------------------------------------------------------|
 * |       CMU         | CMU_ClockEnable, EMU_DCDCSetPFMXTimeoutMaxCtrl (DCDC access: SL_TRUSTZONE_PERIPHERAL_DCDC_S)  |
 * |       HFXO        | CMU_HFXOCTuneSet, CMU_HFXOCTuneGet, CMU_HFXOCoreBiasCurrentCalibrate                          |
 * |       PRS         | PRS_SourceAsyncSignalSet, PRS_GetFreeChannel, PRS_ConnectConsumer, PRS_PinOutput, PRS_Combine |
 *
 * When there is a combination of secure and non-secure peripherals, defines
 * must be added in secure application slcp file so non-secure peripherals can
 * properly accessed by secure code. Example with only CMU non-secure:
 *
 * @code{.slcp}
 * define:
 *   - name: SL_TRUSTZONE_PERIPHERAL_CMU_S
 *     value: 0
 *     condition: [trustzone_secure]
 *   - name: SL_TRUSTZONE_PERIPHERAL_EMU_S
 *     value: 1
 *     condition: [trustzone_secure]
 *   - name: SL_TRUSTZONE_PERIPHERAL_GPIO_S
 *     value: 1
 *     condition: [trustzone_secure]
 *   - name: SL_TRUSTZONE_PERIPHERAL_LDMA_S
 *     value: 1
 *     condition: [trustzone_secure]
 *   - name: SL_TRUSTZONE_PERIPHERAL_HFXO0_S
 *     value: 1
 *     condition: [trustzone_secure]
 *   - name: SL_TRUSTZONE_PERIPHERAL_PRS_S
 *     value: 1
 *     condition: [trustzone_secure]
 *   - name: SL_TRUSTZONE_PERIPHERAL_SYSRTC_S
 *     value: 1
 *     condition: [trustzone_secure]
 * @endcode
 *
 * Some RAIL API are not suppoted with EMU, GPIO, LDMA, HFXO, PRS or SYSRTC
 * configured secure:
 *
 * | Secure peripheral |                                                                                                             Unsupported RAIL API/features                                                                      |
 * |-------------------|----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|
 * |       EMU         | \ref RAIL_StartThermistorMeasurement(), \ref RAIL_InitPowerManager()                                                                                                                                           |
 * |       GPIO        | \ref RAIL_EnableDirectMode(), \ref RAIL_EnableDirectModeAlt(), \ref RAIL_EnablePti(), \ref RAIL_ConfigPti(), \ref RAIL_ConfigHFXOThermistor(), \ref RAIL_StartThermistorMeasurement(), \ref RAIL_ConfigVdet()  |
 * |       LDMA        | \ref RAIL_IEEE802154_SUPPORTS_RX_CHANNEL_SWITCHING (\ref RAIL_IEEE802154_ConfigRxChannelSwitching() and \ref RAIL_RX_OPTION_CHANNEL_SWITCHING)                                                                 |
 * |       HFXO        | \ref RAIL_StartThermistorMeasurement(), \ref RAIL_EnableVdet(), \ref RAIL_GetVdet()                                                                                                                            |
 * |       PRS         | \ref RAIL_EnablePrsLnaBypass()                                                                                                                                                                                 |
 * |       SYSRTC      | \ref RAIL_ConfigSleep() with \ref RAIL_SleepConfig_t::RAIL_SLEEP_CONFIG_TIMERSYNC_ENABLED, \ref RAIL_ConfigSleepAlt() with \ref RAIL_SleepConfig_t::RAIL_SLEEP_CONFIG_TIMERSYNC_ENABLED                        |
 *
 * @{
 */

/**
 * Init RAIL TrustZone feature for non-secure world
 *
 * @param[in] pTzConfig A non-NULL pointer to a \ref RAIL_TZ_Config_t
 *   structure.
 * @return Status code indicating success of the function call.
 *
 * @note This function must only be called from non-secure world (only if
 *   TrustZone is activated) on platforms having
 *   \ref RAIL_SUPPORTS_TRUSTZONE_SECURE_PERIPHERALS. It must be called
 *   before \ref RAIL_Init() and it must be called again with updated
 *   \ref RAIL_TZ_Config_t if peripherals secure configuration has changed.
 */
RAIL_Status_t RAIL_TZ_InitNonSecure(const RAIL_TZ_Config_t *pTzConfig);

/**
 * Init RAIL TrustZone feature for secure world
 *
 * @return Status code indicating success of the function call.
 *
 * @note This function must only be called from secure world (only if TrustZone
 *   is activated) on platforms having
 *   \ref RAIL_SUPPORTS_TRUSTZONE_SECURE_PERIPHERALS. It must be called
 *   before starting the non-secure application.
 */
RAIL_Status_t RAIL_TZ_InitSecure(void);

/**
 * Check the secure state of peripherals used by RAIL.
 *
 * @return Status code indicating success of the function call.
 *
 * @note This function must only be called from secure world and it must be
 *   called at the beginning of each RAIL TrustZone callbacks
 *   (\ref RAIL_TZ_Config_t) secure code to avoid secure fault.
 */
RAIL_Status_t RAIL_TZ_CheckPeripheralsSecureStates(void);

/**
 * Enable radio clocks.
 *
 * @return Status code indicating success of the function call.
 *
 * @note This function must only be called from secure world when CMU is
 *   configured as secure TrustZone peripheral.
 *
 */
RAIL_Status_t RAIL_TZ_RadioClockEnable(void);

/**
 * Enable RFECA clocks.
 *
 * @return Status code indicating success of the function call.
 *
 * @note This function must only be called from secure world when CMU is
 *   configured as secure TrustZone peripheral.
 *
 */
RAIL_Status_t RAIL_TZ_RfecaClockEnable(void);

/**
 * Indicate whether RFECA clocks are enabled.
 *
 * @return true if RFECA clocks are enabled; false otherwise
 *
 * @note This function must only be called from secure world when CMU is
 *   configured as secure TrustZone peripheral.
 *
 */
bool RAIL_TZ_RfecaIsClockEnabled(void);

/**
 * Read the internal temperature.
 *
 * @param[out] internalTemperatureKelvin A pointer to the internal temperature
 *   in Kelvin.
 * @param[in] enableTemperatureInterrupts Indicate whether temperature
 *   interrupts are enabled.
 * @return Status code indicating success of the function call.
 *
 * @note This function must only be called from secure world when EMU is
 *   configured as secure TrustZone peripheral.
 *
 */
RAIL_Status_t RAIL_TZ_ReadInternalTemperature(uint16_t *internalTemperatureKelvin,
                                              bool enableTemperatureInterrupts);

/**
 * Enable secure peripheral interrupts needed by the radio.
 *
 * @return Status code indicating success of the function call.
 *
 * @note This function must only be called from secure world when EMU is
 *   configured as secure TrustZone peripheral.
 *
 */
RAIL_Status_t RAIL_TZ_EnableSecureRadioIrqs(void);

/**
 * Disable secure peripheral interrupts needed by the radio.
 *
 * @return Status code indicating success of the function call.
 *
 * @note This function must only be called from secure world when EMU is
 *   configured as secure TrustZone peripheral.
 *
 */
RAIL_Status_t RAIL_TZ_DisableSecureRadioIrqs(void);

/**
 * Perform ldma transfer for the radio.
 *
 * @param[in] pDest A pointer to the destination data.
 * @param[in] pSrc A pointer to the source data.
 * @param[in] numWords Number of words to transfer.
 * @return Status code indicating success of the function call.
 *
 * @note This function must only be called from secure world when LDMA is
 *   configured as secure TrustZone peripheral.
 *
 */
RAIL_Status_t RAIL_TZ_RadioPerformM2mLdma(uint32_t *pDest,
                                          const uint32_t *pSrc,
                                          uint32_t numWords);

/**
 * Configure HFXO.
 *
 * @return Status code indicating success of the function call.
 *
 * @note This function must only be called from secure world when HFXO is
 *   configured as secure TrustZone peripheral.
 *
 */
RAIL_Status_t RAIL_TZ_ConfigureHfxo(void);

/**
 * Set GPIO for antenna config.
 *
 * @param[in] config A pointer to a configuration structure applied to the relevant Antenna
 *   Configuration registers. A NULL configuration will produce undefined behavior.
 * @return Status code indicating success of the function call.
 *
 * @note This function must only be called from secure world when CMU or GPIO
 *   are configured as secure TrustZone peripheral.
 *
 */
RAIL_Status_t RAIL_TZ_ConfigAntennaGpio(const RAIL_AntennaConfig_t *config);

/** @} */ // end of group TrustZone

/******************************************************************************
 * Features
 *****************************************************************************/
/**
 * @addtogroup Features
 * @{
 */

/**
 * Indicate whether RAIL supports 2.4 GHz band operation on this chip.
 *
 * @param[in] railHandle A radio-generic or real RAIL instance handle.
 * @return true if the 2.4 GHz band is supported; false otherwise.
 *
 * Runtime refinement of compile-time \ref RAIL_SUPPORTS_2P4GHZ_BAND.
 */
bool RAIL_Supports2p4GHzBand(RAIL_Handle_t railHandle);

/**
 * Indicate whether RAIL supports SubGHz band operation on this chip.
 *
 * @param[in] railHandle A radio-generic or real RAIL instance handle.
 * @return true if the SubGHz band is supported; false otherwise.
 *
 * Runtime refinement of compile-time \ref RAIL_SUPPORTS_SUBGHZ_BAND.
 */
bool RAIL_SupportsSubGHzBand(RAIL_Handle_t railHandle);

/**
 * Indicate whether this chip supports dual 2.4 GHz and SubGHz band operation.
 *
 * @param[in] railHandle A radio-generic or real RAIL instance handle.
 * @return true if the dual band is supported; false otherwise.
 *
 * Runtime refinement of compile-time \ref RAIL_SUPPORTS_DUAL_BAND.
 */
bool RAIL_SupportsDualBand(RAIL_Handle_t railHandle);

/**
 * Indicate whether this chip supports bit masked address filtering.
 *
 * @param[in] railHandle A radio-generic or real RAIL instance handle.
 * @return true if bit masked address filtering is supported; false otherwise.
 *
 * Runtime refinement of compile-time
 * \ref RAIL_SUPPORTS_ADDR_FILTER_ADDRESS_BIT_MASK.
 */
bool RAIL_SupportsAddrFilterAddressBitMask(RAIL_Handle_t railHandle);

/**
 * Indicate whether this chip supports address filter mask information
 * for incoming packets in
 * \ref RAIL_RxPacketInfo_t::filterMask and
 * \ref RAIL_IEEE802154_Address_t::filterMask.
 *
 * @param[in] railHandle A radio-generic or real RAIL instance handle.
 * @return true if address filter information is supported; false otherwise
 *   (in which case \ref RAIL_RxPacketInfo_t::filterMask value is undefined).
 *
 * Runtime refinement of compile-time \ref RAIL_SUPPORTS_ADDR_FILTER_MASK.
 */
bool RAIL_SupportsAddrFilterMask(RAIL_Handle_t railHandle);

/**
 * Indicate whether this chip supports alternate TX power settings.
 *
 * @param[in] railHandle A radio-generic or real RAIL instance handle.
 * @return true if alternate TX power settings are supported; false otherwise.
 *
 * Runtime refinement of compile-time \ref
 * RAIL_SUPPORTS_ALTERNATE_TX_POWER.
 */
bool RAIL_SupportsAlternateTxPower(RAIL_Handle_t railHandle);

/**
 * Indicate whether this chip supports antenna diversity.
 *
 * @param[in] railHandle A radio-generic or real RAIL instance handle.
 * @return true if antenna diversity is supported; false otherwise.
 *
 * Runtime refinement of compile-time \ref RAIL_SUPPORTS_ANTENNA_DIVERSITY.
 *
 * @note Certain radio configurations may not support this feature even
 *   if the chip in general claims to support it.
 */
bool RAIL_SupportsAntennaDiversity(RAIL_Handle_t railHandle);

/**
 * Indicate whether this chip supports internal RF path diversity.
 *
 * @param[in] railHandle A radio-generic or real RAIL instance handle.
 * @return true if RF path diversity is supported; false otherwise.
 *
 * Runtime refinement of compile-time \ref RAIL_SUPPORTS_PATH_DIVERSITY.
 *
 * @note Certain radio configurations may not support this feature even
 *   if the chip in general claims to support it.
 */
bool RAIL_SupportsPathDiversity(RAIL_Handle_t railHandle);

/**
 * Indicate whether RAIL supports AUXADC measurements on this chip.
 *
 * @param[in] railHandle A radio-generic or real RAIL instance handle.
 * @return true if AUXADC measurements are supported; false otherwise.
 *
 * Runtime refinement of compile-time \ref RAIL_SUPPORTS_AUXADC.
 */
bool RAIL_SupportsAuxAdc(RAIL_Handle_t railHandle);

/**
 * Indicate whether RAIL supports channel hopping on this chip.
 *
 * @param[in] railHandle A radio-generic or real RAIL instance handle.
 * @return true if channel hopping is supported; false otherwise.
 *
 * Runtime refinement of compile-time \ref RAIL_SUPPORTS_CHANNEL_HOPPING.
 */
bool RAIL_SupportsChannelHopping(RAIL_Handle_t railHandle);

/**
 * Indicate whether this chip supports direct mode.
 *
 * @param[in] railHandle A radio-generic or real RAIL instance handle.
 * @return true if direct mode is supported; false otherwise.
 *
 * Runtime refinement of compile-time \ref
 * RAIL_SUPPORTS_DIRECT_MODE.
 */
bool RAIL_SupportsDirectMode(RAIL_Handle_t railHandle);

/**
 * Indicate whether this chip supports dual sync words.
 *
 * @param[in] railHandle A radio-generic or real RAIL instance handle.
 * @return true if dual sync words are supported; false otherwise.
 *
 * Runtime refinement of compile-time \ref RAIL_SUPPORTS_DUAL_SYNC_WORDS.
 *
 * @note Certain radio configurations may not support this feature even
 *   if the chip in general claims to support it.
 */
bool RAIL_SupportsDualSyncWords(RAIL_Handle_t railHandle);

/**
 * Indicate whether this chip supports start to start TX repeats.
 *
 * @param[in] railHandle A radio-generic or real RAIL instance handle.
 * @return true if start to start TX repeats are supported; false otherwise.
 *
 * Runtime refinement of compile-time \ref
 * RAIL_SUPPORTS_TX_REPEAT_START_TO_START.
 */
bool RAIL_SupportsTxRepeatStartToStart(RAIL_Handle_t railHandle);

/**
 * Indicate whether this chip supports VDET.
 *
 * @param[in] railHandle A radio-generic or real RAIL instance handle.
 * @return true if VDET is supported; false otherwise.
 */
bool RAIL_SupportsVdet(RAIL_Handle_t railHandle);

/**
 * Indicate whether RAIL supports thermistor measurements on this chip.
 *
 * @param[in] railHandle A radio-generic or real RAIL instance handle.
 * @return true if thermistor measurements are supported; false otherwise.
 *
 * Runtime refinement of compile-time \ref RAIL_SUPPORTS_EXTERNAL_THERMISTOR.
 */
bool RAIL_SupportsExternalThermistor(RAIL_Handle_t railHandle);

/**
 * Indicate whether RAIL supports HFXO compensation on this chip.
 *
 * @param[in] railHandle A radio-generic or real RAIL instance handle.
 * @return true if HFXO compensation is supported and
 *   \ref RAIL_ConfigHFXOThermistor() has been successfully called;
 *   false otherwise.
 *
 * Runtime refinement of compile-time \ref RAIL_SUPPORTS_HFXO_COMPENSATION.
 */
bool RAIL_SupportsHFXOCompensation(RAIL_Handle_t railHandle);

/**
 * Indicate whether this chip supports MFM protocol.
 *
 * @param[in] railHandle A radio-generic or real RAIL instance handle.
 * @return true if MFM protocol is supported; false otherwise.
 *
 * Runtime refinement of compile-time \ref RAIL_SUPPORTS_MFM.
 */
bool RAIL_SupportsMfm(RAIL_Handle_t railHandle);

/**
 * Indicate whether RAIL supports OFDM band operation on this chip.
 *
 * @param[in] railHandle A radio-generic or real RAIL instance handle.
 * @return true if OFDM operation is supported; false otherwise.
 *
 * Runtime refinement of compile-time \ref RAIL_SUPPORTS_OFDM_PA.
 */
bool RAIL_SupportsOFDMPA(RAIL_Handle_t railHandle);

/**
 * Indicate whether this chip supports a high-precision LFRCO.
 *
 * @param[in] railHandle A radio-generic or real RAIL instance handle.
 * @return true if high-precision LFRCO is supported; false otherwise.
 *
 * Runtime refinement of compile-time \ref RAIL_SUPPORTS_PRECISION_LFRCO.
 */
bool RAIL_SupportsPrecisionLFRCO(RAIL_Handle_t railHandle);

/**
 * Indicate whether this chip supports radio entropy.
 *
 * @param[in] railHandle A radio-generic or real RAIL instance handle.
 * @return true if radio entropy is supported; false otherwise.
 *
 * Runtime refinement of compile-time \ref RAIL_SUPPORTS_RADIO_ENTROPY.
 */
bool RAIL_SupportsRadioEntropy(RAIL_Handle_t railHandle);

/**
 * Indicate whether RAIL supports RFSENSE Energy Detection Mode on this chip.
 *
 * @param[in] railHandle A radio-generic or real RAIL instance handle.
 * @return true if RFSENSE Energy Detection Mode is supported; false otherwise.
 *
 * Runtime refinement of compile-time
 * \ref RAIL_SUPPORTS_RFSENSE_ENERGY_DETECTION.
 */
bool RAIL_SupportsRfSenseEnergyDetection(RAIL_Handle_t railHandle);

/**
 * Indicate whether RAIL supports RFSENSE Selective(OOK) Mode on this chip.
 *
 * @param[in] railHandle A radio-generic or real RAIL instance handle.
 * @return true if RFSENSE Selective(OOK) Mode is supported; false otherwise.
 *
 * Runtime refinement of compile-time \ref RAIL_SUPPORTS_RFSENSE_SELECTIVE_OOK.
 */
bool RAIL_SupportsRfSenseSelectiveOok(RAIL_Handle_t railHandle);

/**
 * Indicate whether this chip supports configurable RSSI threshold
 * set by \ref RAIL_SetRssiDetectThreshold().
 *
 * @param[in] railHandle A radio-generic or real RAIL instance handle.
 * @return true if setting configurable RSSI is supported; false otherwise.
 *
 * Runtime refinement of compile-time \ref RAIL_SUPPORTS_RSSI_DETECT_THRESHOLD.
 */
bool RAIL_SupportsRssiDetectThreshold(RAIL_Handle_t railHandle);

/**
 * Indicate whether this chip supports RX direct mode data to FIFO.
 *
 * @param[in] railHandle A radio-generic or real RAIL instance handle.
 * @return true if direct mode data to FIFO is supported; false otherwise.
 *
 * Runtime refinement of compile-time \ref
 * RAIL_SUPPORTS_RX_DIRECT_MODE_DATA_TO_FIFO.
 */
bool RAIL_SupportsRxDirectModeDataToFifo(RAIL_Handle_t railHandle);

/**
 * Indicate whether this chip supports raw RX data
 * sources other than \ref RAIL_RxDataSource_t::RX_PACKET_DATA.
 *
 * @param[in] railHandle A radio-generic or real RAIL instance handle.
 * @return true if direct mode is supported; false otherwise.
 *
 * Runtime refinement of compile-time \ref RAIL_SUPPORTS_RX_RAW_DATA.
 */
bool RAIL_SupportsRxRawData(RAIL_Handle_t railHandle);

/**
 * Indicate whether this chip supports SQ-based PHY.
 *
 * @param[in] railHandle A radio-generic or real RAIL instance handle.
 * @return true if the SQ-based PHY is supported; false otherwise.
 *
 * Runtime refinement of compile-time \ref RAIL_SUPPORTS_SQ_PHY.
 */
bool RAIL_SupportsSQPhy(RAIL_Handle_t railHandle);

/**
 * Indicate whether this chip supports a particular power mode (PA).
 *
 * @param[in] railHandle A radio-generic or real RAIL instance handle.
 * @param[in] powerMode The power mode to check if supported.
 * @param[out] pMaxPowerLevel A pointer to a \ref RAIL_TxPowerLevel_t that
 *   if non-NULL will be filled in with the power mode's highest power level
 *   allowed if this function returns true.
 * @return true if the powerMode is supported; false otherwise.
 *
 * This function has no compile-time equivalent.
 *
 * @note Consider using \ref RAIL_SupportsTxPowerModeAlt to also get the power
 *   mode's lowest allowed power level.
 */
bool RAIL_SupportsTxPowerMode(RAIL_Handle_t railHandle,
                              RAIL_TxPowerMode_t powerMode,
                              RAIL_TxPowerLevel_t *pMaxPowerLevel);

/**
 * Indicate whether this chip supports a particular power mode (PA) and
 * provides the maximum and minimum power level for that power mode
 * if supported by the chip.
 *
 * @param[in] railHandle A radio-generic or real RAIL instance handle.
 * @param[in,out] powerMode A pointer to PA power mode to check if supported.
 *   If \ref RAIL_TX_POWER_MODE_2P4GIG_HIGHEST or \ref
 *   RAIL_TX_POWER_MODE_SUBGIG_HIGHEST is passed in, it will be updated
 *   to the highest corresponding PA available on the chip.
 * @param[out] maxPowerLevel A pointer to a \ref RAIL_TxPowerLevel_t that
 *   if non-NULL will be filled in with the power mode's highest power level
 *   allowed if this function returns true.
 * @param[out] minPowerLevel A pointer to a \ref RAIL_TxPowerLevel_t that
 *   if non-NULL will be filled in with the power mode's lowest power level
 *   allowed if this function returns true.
 * @return true if powerMode is supported; false otherwise.
 *
 * This function has no compile-time equivalent.
 */
bool RAIL_SupportsTxPowerModeAlt(RAIL_Handle_t railHandle,
                                 RAIL_TxPowerMode_t *powerMode,
                                 RAIL_TxPowerLevel_t *maxPowerLevel,
                                 RAIL_TxPowerLevel_t *minPowerLevel);

/**
 * Indicate whether this chip supports automatic TX to TX transitions.
 *
 * @param[in] railHandle A radio-generic or real RAIL instance handle.
 * @return true if TX to TX transitions are supported; false otherwise.
 *
 * Runtime refinement of compile-time \ref RAIL_SUPPORTS_TX_TO_TX.
 */
bool RAIL_SupportsTxToTx(RAIL_Handle_t railHandle);

/**
 * Indicate whether RAIL supports the BLE protocol on this chip.
 *
 * @param[in] railHandle A radio-generic or real RAIL instance handle.
 * @return true if BLE is supported; false otherwise.
 *
 * Runtime refinement of compile-time \ref RAIL_SUPPORTS_PROTOCOL_BLE.
 */
bool RAIL_SupportsProtocolBLE(RAIL_Handle_t railHandle);

/**
 * Indicate whether this chip supports BLE 1 Mbps Non-Viterbi PHY.
 *
 * @param[in] railHandle A radio-generic or real RAIL instance handle.
 * @return true if BLE 1 Mbps Non-Viterbi is supported; false otherwise.
 *
 * Runtime refinement of compile-time \ref RAIL_BLE_SUPPORTS_1MBPS_NON_VITERBI.
 */
bool RAIL_BLE_Supports1MbpsNonViterbi(RAIL_Handle_t railHandle);

/**
 * Indicate whether this chip supports BLE 1 Mbps Viterbi PHY.
 *
 * @param[in] railHandle A radio-generic or real RAIL instance handle.
 * @return true if BLE 1 Mbps Viterbi is supported; false otherwise.
 *
 * Runtime refinement of compile-time \ref RAIL_BLE_SUPPORTS_1MBPS_VITERBI.
 */
bool RAIL_BLE_Supports1MbpsViterbi(RAIL_Handle_t railHandle);

/**
 * Indicate whether this chip supports BLE 1 Mbps operation.
 *
 * @param[in] railHandle A radio-generic or real RAIL instance handle.
 * @return true if BLE 1 Mbps operation is supported; false otherwise.
 *
 * Runtime refinement of compile-time \ref RAIL_BLE_SUPPORTS_1MBPS.
 */
static inline
bool RAIL_BLE_Supports1Mbps(RAIL_Handle_t railHandle)
{
  bool temp = RAIL_BLE_Supports1MbpsViterbi(railHandle); // Required for MISRA compliance
  return (RAIL_BLE_Supports1MbpsNonViterbi(railHandle)
          || temp);
}

/**
 * Indicate whether this chip supports BLE 2 Mbps Non-Viterbi PHY.
 *
 * @param[in] railHandle A radio-generic or real RAIL instance handle.
 * @return true if BLE 2 Mbps Non-Viterbi is supported; false otherwise.
 *
 * Runtime refinement of compile-time \ref RAIL_BLE_SUPPORTS_2MBPS_NON_VITERBI.
 */
bool RAIL_BLE_Supports2MbpsNonViterbi(RAIL_Handle_t railHandle);

/**
 * Indicate whether this chip supports BLE 2 Mbps Viterbi PHY.
 *
 * @param[in] railHandle A radio-generic or real RAIL instance handle.
 * @return true if BLE 2 Mbps Viterbi is supported; false otherwise.
 *
 * Runtime refinement of compile-time \ref RAIL_BLE_SUPPORTS_2MBPS_VITERBI.
 */
bool RAIL_BLE_Supports2MbpsViterbi(RAIL_Handle_t railHandle);

/**
 * Indicate whether this chip supports BLE 2 Mbps operation.
 *
 * @param[in] railHandle A radio-generic or real RAIL instance handle.
 * @return true if BLE 2 Mbps operation is supported; false otherwise.
 *
 * Runtime refinement of compile-time \ref RAIL_BLE_SUPPORTS_2MBPS.
 */
static inline
bool RAIL_BLE_Supports2Mbps(RAIL_Handle_t railHandle)
{
  bool temp = RAIL_BLE_Supports2MbpsViterbi(railHandle); // Required for MISRA compliance
  return (RAIL_BLE_Supports2MbpsNonViterbi(railHandle)
          || temp);
}

/**
 * Indicate whether this chip supports BLE Antenna Switching needed for
 * Angle-of-Arrival receives or Angle-of-Departure transmits.
 *
 * @param[in] railHandle A radio-generic or real RAIL instance handle.
 * @return true if BLE Antenna Switching is supported; false otherwise.
 *
 * Runtime refinement of compile-time \ref RAIL_BLE_SUPPORTS_ANTENNA_SWITCHING.
 */
bool RAIL_BLE_SupportsAntennaSwitching(RAIL_Handle_t railHandle);

/**
 * Indicate whether this chip supports BLE Coded PHY used for Long-Range.
 *
 * @param[in] railHandle A radio-generic or real RAIL instance handle.
 * @return true if BLE Coded PHY is supported; false otherwise.
 *
 * Runtime refinement of compile-time \ref RAIL_BLE_SUPPORTS_CODED_PHY.
 */
bool RAIL_BLE_SupportsCodedPhy(RAIL_Handle_t railHandle);

/**
 * Indicate whether this chip supports BLE CTE (Constant Tone Extension)
 * needed for Angle-of-Arrival/Departure transmits.
 *
 * @param[in] railHandle A radio-generic or real RAIL instance handle.
 * @return true if BLE CTE is supported; false otherwise.
 *
 * Runtime refinement of compile-time \ref RAIL_BLE_SUPPORTS_CTE.
 */
bool RAIL_BLE_SupportsCte(RAIL_Handle_t railHandle);

#ifndef DOXYGEN_SHOULD_SKIP_THIS
/**
 * Indicate whether this chip supports BLE CS.
 *
 * @param[in] railHandle A radio-generic or real RAIL instance handle.
 * @return true if BLE CS is supported; false otherwise.
 *
 * Runtime refinement of compile-time \ref RAIL_BLE_SUPPORTS_CS.
 */
bool RAIL_BLE_SupportsCs(RAIL_Handle_t railHandle);
#endif//DOXYGEN_SHOULD_SKIP_THIS

/**
 * Indicate whether this chip supports BLE IQ Sampling needed for
 * Angle-of-Arrival/Departure receives.
 *
 * @param[in] railHandle A radio-generic or real RAIL instance handle.
 * @return true if BLE IQ Sampling is supported; false otherwise.
 *
 * Runtime refinement of compile-time \ref RAIL_BLE_SUPPORTS_IQ_SAMPLING.
 */
bool RAIL_BLE_SupportsIQSampling(RAIL_Handle_t railHandle);

/**
 * Indicate whether this chip supports BLE PHY switch to RX
 * functionality, which is used to switch BLE PHYs at a specific time
 * to receive auxiliary packets.
 *
 * @param[in] railHandle A radio-generic or real RAIL instance handle.
 * @return true if BLE PHY switch to RX is supported; false otherwise.
 *
 * Runtime refinement of compile-time \ref RAIL_BLE_SUPPORTS_PHY_SWITCH_TO_RX.
 */
bool RAIL_BLE_SupportsPhySwitchToRx(RAIL_Handle_t railHandle);

/**
 * Indicate whether this chip supports the Quuppa PHY.
 *
 * @param[in] railHandle A radio-generic or real RAIL instance handle.
 * @return true if the Quuppa is supported; false otherwise.
 *
 * Runtime refinement of compile-time \ref RAIL_BLE_SUPPORTS_QUUPPA.
 */
bool RAIL_BLE_SupportsQuuppa(RAIL_Handle_t railHandle);

/**
 * Indicate whether this chip supports BLE signal identifier.
 *
 * @param[in] railHandle A radio-generic or real RAIL instance handle.
 * @return true if signal identifier is supported; false otherwise.
 */
bool RAIL_BLE_SupportsSignalIdentifier(RAIL_Handle_t railHandle);

/**
 * Indicate whether this chip supports BLE Simulscan PHY used for simultaneous
 * BLE 1 Mbps and Coded PHY reception.
 *
 * @param[in] railHandle A radio-generic or real RAIL instance handle.
 * @return true if BLE Simulscan PHY is supported; false otherwise.
 *
 * Runtime refinement of compile-time \ref RAIL_BLE_SUPPORTS_SIMULSCAN_PHY.
 */
bool RAIL_BLE_SupportsSimulscanPhy(RAIL_Handle_t railHandle);

/**
 * Indicate whether this chip supports the IEEE 802.15.4 protocol.
 *
 * @param[in] railHandle A radio-generic or real RAIL instance handle.
 * @return true if the 802.15.4 protocol is supported; false otherwise.
 *
 * Runtime refinement of compile-time \ref RAIL_SUPPORTS_PROTOCOL_IEEE802154.
 */
bool RAIL_SupportsProtocolIEEE802154(RAIL_Handle_t railHandle);

#ifndef DOXYGEN_SHOULD_SKIP_THIS
/**
 * Indicate whether this chip supports the IEEE 802.15.4 2 Mbps PHY.
 *
 * @param[in] railHandle A radio-generic or real RAIL instance handle.
 * @return true if the 802.15.4 2 Mbps PHY is supported; false otherwise.
 *
 * Runtime refinement of compile-time \ref RAIL_IEEE802154_SUPPORTS_2MBPS_PHY.
 */
bool RAIL_IEEE802154_Supports2MbpsPhy(RAIL_Handle_t railHandle);
#endif //DOXYGEN_SHOULD_SKIP_THIS

/**
 * Indicate whether this chip supports the IEEE 802.15.4 Wi-Fi Coexistence PHY.
 *
 * @param[in] railHandle A radio-generic or real RAIL instance handle.
 * @return true if the 802.15.4 COEX PHY is supported; false otherwise.
 *
 * Runtime refinement of compile-time \ref RAIL_IEEE802154_SUPPORTS_COEX_PHY.
 */
bool RAIL_IEEE802154_SupportsCoexPhy(RAIL_Handle_t railHandle);

/**
 * Indicate whether this chip supports the IEEE 802.15.4 2.4 GHz band variant.
 *
 * @param[in] railHandle A radio-generic or real RAIL instance handle.
 * @return true if IEEE 802.15.4 2.4 GHz band variant is supported;
 *   false otherwise.
 *
 * Runtime refinement of compile-time \ref RAIL_SUPPORTS_IEEE802154_BAND_2P4.
 */
bool RAIL_SupportsIEEE802154Band2P4(RAIL_Handle_t railHandle);

/**
 * Indicate whether this chip supports the thermal protection.
 *
 * @param[in] railHandle A radio-generic or real RAIL instance handle.
 * @return true if thermal protection is supported;
 *   false otherwise.
 *
 * Runtime refinement of compile-time \ref RAIL_SUPPORTS_THERMAL_PROTECTION.
 */
bool RAIL_SupportsThermalProtection(RAIL_Handle_t railHandle);

/**
 * Indicate whether this chip supports the IEEE 802.15.4 2.4 RX channel switching.
 *
 * @param[in] railHandle A radio-generic or real RAIL instance handle.
 * @return true if IEEE 802.15.4 2.4 GHz RX channel switching is supported;
 *   false otherwise.
 *
 * Runtime refinement of compile-time \ref RAIL_IEEE802154_SUPPORTS_RX_CHANNEL_SWITCHING.
 */
bool RAIL_IEEE802154_SupportsRxChannelSwitching(RAIL_Handle_t railHandle);

/**
 * Indicate whether this chip supports the IEEE 802.15.4 PHY with custom settings.
 *
 * @param[in] railHandle A radio-generic or real RAIL instance handle.
 * @return true if the 802.15.4 PHY with custom settings is supported; false otherwise.
 *
 * Runtime refinement of compile-time \ref RAIL_IEEE802154_SUPPORTS_CUSTOM1_PHY.
 */
bool RAIL_IEEE802154_SupportsCustom1Phy(RAIL_Handle_t railHandle);

/**
 * Indicate whether this chip supports the IEEE 802.15.4
 * front end module optimized PHY.
 *
 * @param[in] railHandle A radio-generic or real RAIL instance handle.
 * @return true if a front end module is supported; false otherwise.
 *
 * Runtime refinement of compile-time \ref RAIL_IEEE802154_SUPPORTS_FEM_PHY.
 */
bool RAIL_IEEE802154_SupportsFemPhy(RAIL_Handle_t railHandle);

/**
 * Indicate whether this chip supports canceling the frame-pending lookup
 * event \ref RAIL_EVENT_IEEE802154_DATA_REQUEST_COMMAND when the radio
 * transitions to a state that renders the the reporting of this event moot
 * (i.e., too late for the stack to influence the outgoing Ack).
 *
 * @param[in] railHandle A radio-generic or real RAIL instance handle.
 * @return true if canceling the lookup event is supported; false otherwise.
 *
 * Runtime refinement of compile-time \ref
 * RAIL_IEEE802154_SUPPORTS_CANCEL_FRAME_PENDING_LOOKUP.
 */
bool RAIL_IEEE802154_SupportsCancelFramePendingLookup(RAIL_Handle_t railHandle);

/**
 * Indicate whether this chip supports early triggering of the frame-pending
 * lookup event \ref RAIL_EVENT_IEEE802154_DATA_REQUEST_COMMAND
 * just after MAC address fields have been received.
 *
 * @param[in] railHandle A radio-generic or real RAIL instance handle.
 * @return true if early triggering is supported; false otherwise.
 *
 * Runtime refinement of compile-time \ref
 * RAIL_IEEE802154_SUPPORTS_EARLY_FRAME_PENDING_LOOKUP.
 */
bool RAIL_IEEE802154_SupportsEarlyFramePendingLookup(RAIL_Handle_t railHandle);

/**
 * Indicate whether RAIL supports dual PA mode on this chip.
 *
 * @param[in] railHandle A radio-generic or real RAIL instance handle.
 * @return true if the dual PA mode is supported; false otherwise.
 *
 * Runtime refinement of compile-time \ref RAIL_IEEE802154_SUPPORTS_DUAL_PA_CONFIG.
 */
bool RAIL_IEEE802154_SupportsDualPaConfig(RAIL_Handle_t railHandle);

/**
 * Indicate whether this chip supports IEEE 802.15.4E-2012 Enhanced Acking.
 *
 * @param[in] railHandle A radio-generic or real RAIL instance handle.
 * @return true if 802.15.4E Enhanced Acking is supported; false otherwise.
 *
 * Runtime refinement of compile-time \ref
 * RAIL_IEEE802154_SUPPORTS_E_ENHANCED_ACK.
 */
bool RAIL_IEEE802154_SupportsEEnhancedAck(RAIL_Handle_t railHandle);

/**
 * Indicate whether this chip supports IEEE 802.15.4E-2012 Multipurpose frame
 * reception.
 *
 * @param[in] railHandle A radio-generic or real RAIL instance handle.
 * @return true if Multipurpose frame reception is supported; false otherwise.
 *
 * Runtime refinement of compile-time \ref
 * RAIL_IEEE802154_SUPPORTS_E_MULTIPURPOSE_FRAMES.
 */
bool RAIL_IEEE802154_SupportsEMultipurposeFrames(RAIL_Handle_t railHandle);

/**
 * Indicate whether this chip supports the IEEE 802.15.4E-2012 feature
 * subset needed for Zigbee R22 GB868.
 *
 * @param[in] railHandle A radio-generic or real RAIL instance handle.
 * @return true if 802.15.4E GB868 subset is supported; false otherwise.
 *
 * Runtime refinement of compile-time \ref
 * RAIL_IEEE802154_SUPPORTS_E_SUBSET_GB868.
 */
bool RAIL_IEEE802154_SupportsESubsetGB868(RAIL_Handle_t railHandle);

/**
 * Indicate whether this chip supports IEEE 802.15.4G-2012 reception and
 * transmission of frames with 4-byte CRC.
 *
 * @param[in] railHandle A radio-generic or real RAIL instance handle.
 * @return true if 802.15.4G 4-byte CRC is supported; false otherwise.
 *
 * Runtime refinement of compile-time \ref
 * RAIL_IEEE802154_SUPPORTS_G_4BYTE_CRC.
 */
bool RAIL_IEEE802154_SupportsG4ByteCrc(RAIL_Handle_t railHandle);

/**
 * Indicate whether this chip supports IEEE 802.15.4G dynamic FEC.
 *
 * @param[in] railHandle A radio-generic or real RAIL instance handle.
 * @return true if dynamic FEC is supported; false otherwise.
 *
 * Runtime refinement of compile-time \ref
 * RAIL_IEEE802154_SUPPORTS_G_DYNFEC.
 */
bool RAIL_IEEE802154_SupportsGDynFec(RAIL_Handle_t railHandle);

/**
 * Indicate whether this chip supports Wi-SUN.
 *
 * @param[in] railHandle A radio-generic or real RAIL instance handle.
 * @return true if Wi-SUN is supported; false otherwise.
 *
 * Runtime refinement of compile-time \ref
 * RAIL_SUPPORTS_PROTOCOL_WI_SUN.
 */
bool RAIL_SupportsProtocolWiSUN(RAIL_Handle_t railHandle);

/**
 * Indicate whether this chip supports Wi-SUN mode switching.
 *
 * @param[in] railHandle A radio-generic or real RAIL instance handle.
 * @return true if Wi-SUN mode switching is supported; false otherwise.
 *
 * Runtime refinement of compile-time \ref
 * RAIL_IEEE802154_SUPPORTS_G_MODESWITCH.
 */
bool RAIL_IEEE802154_SupportsGModeSwitch(RAIL_Handle_t railHandle);

/**
 * Indicate whether this chip supports IEEE 802.15.4G-2012 feature
 * subset needed for Zigbee R22 GB868.
 *
 * @param[in] railHandle A radio-generic or real RAIL instance handle.
 * @return true if 802.15.4G GB868 subset is supported; false otherwise.
 *
 * Runtime refinement of compile-time \ref
 * RAIL_IEEE802154_SUPPORTS_G_SUBSET_GB868.
 */
bool RAIL_IEEE802154_SupportsGSubsetGB868(RAIL_Handle_t railHandle);

/**
 * Indicate whether this chip supports IEEE 802.15.4G-2012 reception
 * of unwhitened frames.
 *
 * @param[in] railHandle A radio-generic or real RAIL instance handle.
 * @return true if 802.15.4G unwhitened frame reception is supported;
 *   false otherwise.
 *
 * Runtime refinement of compile-time \ref
 * RAIL_IEEE802154_SUPPORTS_G_UNWHITENED_RX.
 */
bool RAIL_IEEE802154_SupportsGUnwhitenedRx(RAIL_Handle_t railHandle);

/**
 * Indicate whether this chip supports IEEE 802.15.4G-2012 transmission
 * of unwhitened frames.
 *
 * @param[in] railHandle A radio-generic or real RAIL instance handle.
 * @return true if 802.15.4G unwhitened frame transmit is supported;
 *   false otherwise.
 *
 * Runtime refinement of compile-time \ref
 * RAIL_IEEE802154_SUPPORTS_G_UNWHITENED_TX.
 */
bool RAIL_IEEE802154_SupportsGUnwhitenedTx(RAIL_Handle_t railHandle);

/**
 * Indicate whether this chip supports WMBUS simultaneous M2O RX of T and C modes.
 *
 * @param[in] railHandle A radio-generic or real RAIL instance handle.
 * @return true if the WMBUS simultaneous M2O RX of T and C modes is supported; false otherwise.
 *
 * Runtime refinement of compile-time \ref RAIL_WMBUS_SUPPORTS_SIMULTANEOUS_T_C_RX.
 */
bool RAIL_WMBUS_SupportsSimultaneousTCRx(RAIL_Handle_t railHandle);

/**
 * Indicate whether this chip supports the Z-Wave protocol.
 *
 * @param[in] railHandle A radio-generic or real RAIL instance handle.
 * @return true if the Z-Wave protocol is supported; false otherwise.
 *
 * Runtime refinement of compile-time \ref RAIL_SUPPORTS_PROTOCOL_ZWAVE.
 */
bool RAIL_SupportsProtocolZWave(RAIL_Handle_t railHandle);

/**
 * Indicate whether this chip supports the Z-Wave concurrent PHY.
 *
 * @param[in] railHandle A radio-generic or real RAIL instance handle.
 * @return true if the Z-Wave concurrent PHY is supported; false otherwise.
 *
 * Runtime refinement of compile-time \ref RAIL_ZWAVE_SUPPORTS_CONC_PHY.
 */
bool RAIL_ZWAVE_SupportsConcPhy(RAIL_Handle_t railHandle);

/**
 * Indicate whether this chip supports the Z-Wave energy detect PHY.
 *
 * @param[in] railHandle A radio-generic or real RAIL instance handle.
 * @return true if the Z-Wave energy detect PHY is supported; false otherwise.
 *
 * Runtime refinement of compile-time \ref RAIL_ZWAVE_SUPPORTS_ED_PHY.
 */
bool RAIL_ZWAVE_SupportsEnergyDetectPhy(RAIL_Handle_t railHandle);

/**
 * Indicate whether this chip supports Z-Wave Region in PTI.
 *
 * @param[in] railHandle A radio-generic or real RAIL instance handle.
 * @return true if ZWAVE Region in PTI is supported; false otherwise.
 *
 * Runtime refinement of compile-time \ref RAIL_ZWAVE_SUPPORTS_REGION_PTI.
 */
bool RAIL_ZWAVE_SupportsRegionPti(RAIL_Handle_t railHandle);

/**
 * Indicate whether this chip supports IEEE 802.15.4 signal identifier.
 *
 * @param[in] railHandle A radio-generic or real RAIL instance handle.
 * @return true if signal identifier is supported; false otherwise.
 */
bool RAIL_IEEE802154_SupportsSignalIdentifier(RAIL_Handle_t railHandle);

/**
 * Indicate whether this chip supports fast RX-to-RX.
 *
 * @param[in] railHandle A radio-generic or real RAIL instance handle.
 * @return true if fast RX-to-RX is supported; false otherwise.
 *
 * Runtime refinement of compile-time \ref RAIL_SUPPORTS_FAST_RX2RX.
 */
bool RAIL_SupportsFastRx2Rx(RAIL_Handle_t railHandle);

/**
 * Indicate whether this chip supports collision detection.
 *
 * @param[in] railHandle A radio-generic or real RAIL instance handle.
 * @return true if collision detection is supported; false otherwise.
 *
 * Runtime refinement of compile-time \ref RAIL_SUPPORTS_COLLISION_DETECTION.
 */
bool RAIL_SupportsCollisionDetection(RAIL_Handle_t railHandle);

/**
 * Indicate whether this chip supports Sidewalk protocol.
 *
 * @param[in] railHandle A radio-generic or real RAIL instance handle.
 * @return true if Sidewalk protocol is supported; false otherwise.
 *
 * Runtime refinement of compile-time \ref RAIL_SUPPORTS_PROTOCOL_SIDEWALK.
 */
bool RAIL_SupportsProtocolSidewalk(RAIL_Handle_t railHandle);

/**
 * Indicate whether this chip supports TrustZone secure configuration of
 * peripherals used by RAIL.
 *
 * @param[in] railHandle A radio-generic or real RAIL instance handle.
 * @return true if secure mode is supported; false otherwise.
 *
 * Runtime refinement of compile-time \ref RAIL_SUPPORTS_TRUSTZONE_SECURE_PERIPHERALS.
 */
bool RAIL_SupportsTrustZoneSecurePeripherals(RAIL_Handle_t railHandle);

/**
 * Indicate whether this chip supports automatic PRS LNA bypass for external
 * FEM.
 *
 * @param[in] railHandle A radio-generic or real RAIL instance handle.
 * @return true if automatic PRS LNA bypass is supported; false otherwise.
 *
 * Runtime refinement of compile-time \ref RAIL_SUPPORTS_PRS_LNA_BYPASS.
 */
bool RAIL_SupportsPrsLnaBypass(RAIL_Handle_t railHandle);

/** @} */ // end of group Features

/** @} */ // end of group RAIL_API

#ifdef __cplusplus
}
#endif

#endif // __RAIL_H__