Initial commit of firmware

config/sl_device_init_dcdc_config.h

@@ -0,0 +1,58 @@
+/***************************************************************************//**
+ * @file
+ * @brief DEVICE_INIT_DCDC Config
+ *******************************************************************************
+ * # License
+ * <b>Copyright 2022 Silicon Laboratories Inc. www.silabs.com</b>
+ *******************************************************************************
+ *
+ * SPDX-License-Identifier: Zlib
+ *
+ * The licensor of this software is Silicon Laboratories Inc.
+ *
+ * This software is provided 'as-is', without any express or implied
+ * warranty. In no event will the authors be held liable for any damages
+ * arising from the use of this software.
+ *
+ * Permission is granted to anyone to use this software for any purpose,
+ * including commercial applications, and to alter it and redistribute it
+ * freely, subject to the following restrictions:
+ *
+ * 1. The origin of this software must not be misrepresented; you must not
+ *    claim that you wrote the original software. If you use this software
+ *    in a product, an acknowledgment in the product documentation would be
+ *    appreciated but is not required.
+ * 2. Altered source versions must be plainly marked as such, and must not be
+ *    misrepresented as being the original software.
+ * 3. This notice may not be removed or altered from any source distribution.
+ *
+ ******************************************************************************/
+
+#ifndef SL_DEVICE_INIT_DCDC_CONFIG_H
+#define SL_DEVICE_INIT_DCDC_CONFIG_H
+
+// <<< Use Configuration Wizard in Context Menu >>>
+
+// <q SL_DEVICE_INIT_DCDC_ENABLE> Enable DC/DC Converter
+// <i>
+// <i> Default: 1
+#define SL_DEVICE_INIT_DCDC_ENABLE         1
+
+// <q SL_DEVICE_INIT_DCDC_BYPASS> Set DC/DC Converter in Bypass Mode
+// <i>
+// <i> Default: 0
+#define SL_DEVICE_INIT_DCDC_BYPASS         0
+
+// <q SL_DEVICE_INIT_DCDC_PFMX_IPKVAL_OVERRIDE> Override for DCDC PFMX Mode Peak Current Setting
+// <i>
+// <i> Default: 1
+#define SL_DEVICE_INIT_DCDC_PFMX_IPKVAL_OVERRIDE  1
+
+// <o SL_DEVICE_INIT_DCDC_PFMX_IPKVAL> DCDC PFMX Mode Peak Current Setting <0-15>
+// <i>
+// <i> Default: DCDC_PFMXCTRL_IPKVAL_DEFAULT
+#define SL_DEVICE_INIT_DCDC_PFMX_IPKVAL    12
+
+// <<< end of configuration section >>>
+
+#endif // SL_DEVICE_INIT_DCDC_CONFIG_H