Initial commit of firmware

config/sl_power_manager_config.h

@@ -0,0 +1,78 @@
+/***************************************************************************//**
+ * @file
+ * @brief Power Manager configuration file.
+ *******************************************************************************
+ * # License
+ * <b>Copyright 2020 Silicon Laboratories Inc. www.silabs.com</b>
+ *******************************************************************************
+ *
+ * SPDX-License-Identifier: Zlib
+ *
+ * The licensor of this software is Silicon Laboratories Inc.
+ *
+ * This software is provided 'as-is', without any express or implied
+ * warranty. In no event will the authors be held liable for any damages
+ * arising from the use of this software.
+ *
+ * Permission is granted to anyone to use this software for any purpose,
+ * including commercial applications, and to alter it and redistribute it
+ * freely, subject to the following restrictions:
+ *
+ * 1. The origin of this software must not be misrepresented; you must not
+ *    claim that you wrote the original software. If you use this software
+ *    in a product, an acknowledgment in the product documentation would be
+ *    appreciated but is not required.
+ * 2. Altered source versions must be plainly marked as such, and must not be
+ *    misrepresented as being the original software.
+ * 3. This notice may not be removed or altered from any source distribution.
+ *
+ ******************************************************************************/
+
+// <<< Use Configuration Wizard in Context Menu >>>
+
+#ifndef SL_POWER_MANAGER_CONFIG_H
+#define SL_POWER_MANAGER_CONFIG_H
+
+// <h>Power Manager Configuration
+
+// <q SL_POWER_MANAGER_CUSTOM_HF_OSCILLATOR_IRQ_HANDLER> Enable custom IRQ handler for external HF oscillator.
+// <i> Enable if CMU_IRQHandler/HFXO0_IRQHandler is needed from your application.
+// <i> The function sl_power_manager_irq_handler() will have to be called from you custom handler if this is enabled.
+// <i> Default: 0
+#define SL_POWER_MANAGER_CUSTOM_HF_OSCILLATOR_IRQ_HANDLER  0
+
+// <q SL_POWER_MANAGER_CONFIG_VOLTAGE_SCALING_FAST_WAKEUP> Enable fast wakeup (disable voltage scaling in EM2/3 mode)
+// <i> Enable or disable voltage scaling in EM2/3 modes (when available). This decreases wakeup time by about 30 us.
+// <i> Deprecated. It is replaced by the function sl_power_manager_em23_voltage_scaling_enable_fast_wakeup()
+// <i> Default: 0
+#define SL_POWER_MANAGER_CONFIG_VOLTAGE_SCALING_FAST_WAKEUP   0
+
+// <e SL_POWER_MANAGER_DEBUG> Enable debugging feature
+// <i> Enable or disable debugging features (trace the different modules that have requirements).
+// <i> Default: 0
+#define SL_POWER_MANAGER_DEBUG  0
+
+// <o SL_POWER_MANAGER_DEBUG_POOL_SIZE> Maximum numbers of requirements that can be logged
+// <i> Default: 10
+#define SL_POWER_MANAGER_DEBUG_POOL_SIZE  10
+// </e>
+
+// <o SL_POWER_MANAGER_INIT_EMU_EM4_PIN_RETENTION_MODE> Pin retention mode
+// <i>
+// <EMU_EM4CTRL_EM4IORETMODE_DISABLE=> No retention
+// <EMU_EM4CTRL_EM4IORETMODE_EM4EXIT=> Retention through EM4
+// <EMU_EM4CTRL_EM4IORETMODE_SWUNLATCH=> Retention through EM4 and wakeup
+// <d> power_manager_pin_retention_disable
+#define SL_POWER_MANAGER_INIT_EMU_EM4_PIN_RETENTION_MODE EMU_EM4CTRL_EM4IORETMODE_DISABLE
+
+// <e SL_POWER_MANAGER_INIT_EMU_EM2_DEBUG_ENABLE > Enable EM2 debugging feature
+// <i> Enable or disable debugging features.
+// <i> Default: 1
+#define SL_POWER_MANAGER_INIT_EMU_EM2_DEBUG_ENABLE 1
+// </e>
+
+// </h>
+
+#endif /* SL_POWER_MANAGER_CONFIG_H */
+
+// <<< end of configuration section >>>