Initial commit of firmware

config/sl_simple_button_config.h

@@ -0,0 +1,72 @@
+/***************************************************************************//**
+ * @file
+ * @brief Simple Button Driver Configuration
+ *******************************************************************************
+ * # License
+ * <b>Copyright 2024 Silicon Laboratories Inc. www.silabs.com</b>
+ *******************************************************************************
+ *
+ * SPDX-License-Identifier: Zlib
+ *
+ * The licensor of this software is Silicon Laboratories Inc.
+ *
+ * This software is provided 'as-is', without any express or implied
+ * warranty. In no event will the authors be held liable for any damages
+ * arising from the use of this software.
+ *
+ * Permission is granted to anyone to use this software for any purpose,
+ * including commercial applications, and to alter it and redistribute it
+ * freely, subject to the following restrictions:
+ *
+ * 1. The origin of this software must not be misrepresented; you must not
+ *    claim that you wrote the original software. If you use this software
+ *    in a product, an acknowledgment in the product documentation would be
+ *    appreciated but is not required.
+ * 2. Altered source versions must be plainly marked as such, and must not be
+ *    misrepresented as being the original software.
+ * 3. This notice may not be removed or altered from any source distribution.
+ *
+ ******************************************************************************/
+
+#ifndef SL_SIMPLE_BUTTON_CONFIG_H
+#define SL_SIMPLE_BUTTON_CONFIG_H
+
+#include "sl_gpio.h"
+// <<< Use Configuration Wizard in Context Menu >>>
+
+// <h> Simple Button Driver Configuration
+
+// <o SL_SIMPLE_BUTTON_DEBOUNCE_BITS> Number of bits <1-15>
+// <i> Default: 5
+// <i> Defines the number of calls to sl_simple_button_poll_step wherein the button
+// <i> state must remain the same before the button state is considered debounced
+#define SL_SIMPLE_BUTTON_DEBOUNCE_BITS    5U
+
+// <o SL_SIMPLE_BUTTON_GPIO_MODE>
+// <SL_GPIO_MODE_INPUT=> GPIO Input
+// <SL_GPIO_MODE_INPUT_PULL=> GPIO Input Pull
+// <SL_GPIO_MODE_INPUT_PULL_FILTER=> GPIO Input Pull Filter
+// <i> Default: gpioModeInput
+#define SL_SIMPLE_BUTTON_GPIO_MODE        SL_GPIO_MODE_INPUT
+
+// <q SL_SIMPLE_BUTTON_GPIO_DOUT>
+// <i> SL_SIMPLE_BUTTON_GPIO_MODE == SL_GPIO_MODE_INPUT, Filter if DOUT is set
+// <i> SL_SIMPLE_BUTTON_GPIO_MODE == SL_GPIO_MODE_INPUT_PULL, DOUT determines pull direction
+#define SL_SIMPLE_BUTTON_GPIO_DOUT        0U
+
+// <q SL_SIMPLE_BUTTON_POLARITY>
+// <i> 0  Active Low
+// <i> 1  Active High
+// <i> Default: 0
+#define SL_SIMPLE_BUTTON_POLARITY         0U
+
+// <q SL_SIMPLE_BUTTON_ALLOW_LED_CONFLICT> Allow the app to manage Buttons and LEDs on the same pin
+// <i> 0  Error if Buttons and LEDs are on the same pin
+// <i> 1  Do not error if Buttons and LEDs are on the same pin
+// <i> Default: 0
+#define SL_SIMPLE_BUTTON_ALLOW_LED_CONFLICT  0U
+
+// </h>
+
+// <<< end of configuration section >>>
+#endif // SL_SIMPLE_BUTTON_CONFIG_H