Initial commit of firmware

config/sl_sleeptimer_config.h

@@ -0,0 +1,82 @@
+/***************************************************************************//**
+ * @file
+ * @brief Sleep Timer configuration file.
+ *******************************************************************************
+ * # License
+ * <b>Copyright 2020 Silicon Laboratories Inc. www.silabs.com</b>
+ *******************************************************************************
+ *
+ * SPDX-License-Identifier: Zlib
+ *
+ * The licensor of this software is Silicon Laboratories Inc.
+ *
+ * This software is provided 'as-is', without any express or implied
+ * warranty. In no event will the authors be held liable for any damages
+ * arising from the use of this software.
+ *
+ * Permission is granted to anyone to use this software for any purpose,
+ * including commercial applications, and to alter it and redistribute it
+ * freely, subject to the following restrictions:
+ *
+ * 1. The origin of this software must not be misrepresented; you must not
+ *    claim that you wrote the original software. If you use this software
+ *    in a product, an acknowledgment in the product documentation would be
+ *    appreciated but is not required.
+ * 2. Altered source versions must be plainly marked as such, and must not be
+ *    misrepresented as being the original software.
+ * 3. This notice may not be removed or altered from any source distribution.
+ *
+ ******************************************************************************/
+
+// <<< Use Configuration Wizard in Context Menu >>>
+
+#ifndef SL_SLEEPTIMER_CONFIG_H
+#define SL_SLEEPTIMER_CONFIG_H
+
+#define SL_SLEEPTIMER_PERIPHERAL_DEFAULT 0
+#define SL_SLEEPTIMER_PERIPHERAL_RTCC    1
+#define SL_SLEEPTIMER_PERIPHERAL_PRORTC  2
+#define SL_SLEEPTIMER_PERIPHERAL_RTC     3
+#define SL_SLEEPTIMER_PERIPHERAL_SYSRTC  4
+#define SL_SLEEPTIMER_PERIPHERAL_BURTC   5
+#define SL_SLEEPTIMER_PERIPHERAL_WTIMER  6
+#define SL_SLEEPTIMER_PERIPHERAL_TIMER   7
+
+// <o SL_SLEEPTIMER_PERIPHERAL> Timer Peripheral Used by Sleeptimer
+//   <SL_SLEEPTIMER_PERIPHERAL_DEFAULT=> Default (auto select)
+//   <SL_SLEEPTIMER_PERIPHERAL_RTCC=> RTCC
+//   <SL_SLEEPTIMER_PERIPHERAL_PRORTC=> Radio internal RTC (PRORTC)
+//   <SL_SLEEPTIMER_PERIPHERAL_RTC=> RTC
+//   <SL_SLEEPTIMER_PERIPHERAL_SYSRTC=> SYSRTC
+//   <SL_SLEEPTIMER_PERIPHERAL_BURTC=> Back-Up RTC (BURTC)
+//   <SL_SLEEPTIMER_PERIPHERAL_WTIMER=> WTIMER
+//   <SL_SLEEPTIMER_PERIPHERAL_TIMER=> TIMER
+// <i> Selection of the Timer Peripheral Used by the Sleeptimer
+#define SL_SLEEPTIMER_PERIPHERAL  SL_SLEEPTIMER_PERIPHERAL_DEFAULT
+
+// <o SL_SLEEPTIMER_TIMER_INSTANCE> TIMER/WTIMER Instance Used by Sleeptimer (not applicable for other peripherals)
+// <i> Make sure TIMER instance size is 32bits. Check datasheet for 32bits TIMERs.
+// <i> Default: 0
+#define SL_SLEEPTIMER_TIMER_INSTANCE  0
+
+// <q SL_SLEEPTIMER_WALLCLOCK_CONFIG> Enable wallclock functionality
+// <i> Enable or disable wallclock functionalities (get_time, get_date, etc).
+// <i> Default: 0
+#define SL_SLEEPTIMER_WALLCLOCK_CONFIG  0
+
+// <o SL_SLEEPTIMER_FREQ_DIVIDER> Timer frequency divider (not applicable for WTIMER/TIMER)
+// <i> WTIMER/TIMER peripherals are always prescaled to 1024.
+// <i> Default: 1
+#define SL_SLEEPTIMER_FREQ_DIVIDER  1
+
+// <q SL_SLEEPTIMER_PRORTC_HAL_OWNS_IRQ_HANDLER> If Radio internal RTC (PRORTC) HAL is used, determines if it owns the IRQ handler. Enable, if no wireless stack is used.
+// <i> Default: 0
+#define SL_SLEEPTIMER_PRORTC_HAL_OWNS_IRQ_HANDLER  0
+
+// <q SL_SLEEPTIMER_DEBUGRUN> Enable DEBUGRUN functionality on hardware RTC.
+// <i> Default: 0
+#define SL_SLEEPTIMER_DEBUGRUN  0
+
+#endif /* SLEEPTIMER_CONFIG_H */
+
+// <<< end of configuration section >>>